Mounts & Racks

The Chief PAC811 is a wider, 14 in camera shelf for mounting a video conferencing camera above or below an extra-large display. Chief designed it for its Large Capacity Height Adjust Flat Panel Solutions, the LPE1U and LFE1U series, where the camera needs to stay with the screen as the display height changes. The shelf supports up to 10 lb (4.5 kg) and extends up to 7.39 in (18.8 cm), giving room for larger camera bodies or soundbar-style conferencing devices that would overhang a narrower...

The Chief PAC870 adds a place for AV components on Chief's Large Capacity Height Adjust Flat Panel Solutions, the LPE1U and LFE1U series. Media players, codecs, small switchers and similar devices can sit on the shelf right at the display instead of on a nearby table or the floor, keeping cable runs short and the installation neat. The shelf supports up to 25 lb (11.3 kg), installs quickly and adjusts in height to suit the equipment and screen position. It arrives fully assembled, and a...

The Chief PAC900 is a durable transport and storage case made specifically for the PRSU Portable Flat Panel Stand. Rental and staging companies, event crews and organizations that move displays between rooms will appreciate how it protects the stand while keeping every piece organized. Components are stored in the order you need them for setup and teardown, which speeds up load-in and helps prevent missing parts. Two wheels on each end and integrated handles make the case easy to roll and...

The Chief PAC910 gives the PRSU Portable Flat Panel Stand a dedicated place for AV gear. It attaches directly to the stand base and can be positioned at any height along the channel, so you can set a laptop, media player or presentation switcher exactly where it is needed. Installation and removal are tool-free, which matters when a stand is set up and struck repeatedly for events. The shelf holds up to 25 lb (11.3 kg), measures 18 in wide by 12.12 in deep, and includes zip-tie anchor points...

The Chief PACBLU Bluetooth dongle turns a smartphone into the height control for a Chief LPE1U or XPD1U electric height-adjust display solution. Once connected, the companion app raises and lowers the display without anyone needing to reach the on-unit controls, which is helpful in classrooms, conference rooms and accessible spaces where the screen is repositioned for different users or seated and standing audiences. Favorite positions can be saved in the app, so returning to a preferred...

The Chief PACCC1 integrates a center channel speaker with a Chief flat panel mount so dialogue and program audio come from the screen itself. Designed for typical 30 to 50 in displays, it positions the speaker between 15 and 18.2 in from the center of the TV to the center of the speaker, and its fore/aft adjustment lets you bring the speaker flush with the front of the panel for a clean, built-in look. The adapter arrives mostly assembled, cutting installation time on site. Chief lists it as...

The Chief PACCC2 is the larger-display version of Chief's center channel speaker adapter, built for typical 46 to 65 in screens. It hangs the speaker below the display at 17.09 to 23.83 in from the center of the TV to the center of the speaker, keeping audio anchored to the picture without a separate wall bracket or shelf. Fore/aft adjustment brings the speaker in line with the face of the panel for a finished appearance, and the adapter ships mostly assembled to speed installation. Chief...

The Chief PACCS1 puts a component shelf directly beneath a flat panel on Chief swing arm and ceiling mounts. It is designed around Chief's 200 x 200 mm and 14 x 14 in Q-Latch mounting systems, so it works with medium and large Chief arms and ceiling mounts that use either interface. Vertical and extension adjustments let you match the shelf to most combinations of component and display, with a range of 15.6 to 17.5 in from the center of the TV to the shelf. Slots in the platform provide room...

The Chief PACFAN1 adds active cooling to the Impact Series On-Wall Kiosk, helping protect the display and media player inside the enclosure in warm lobbies, retail spaces and sunlit locations. The kit delivers 30 CFM of airflow using two 15 CFM fans, and a thermostatic controller runs them only when needed, switching on at 87F (30.5C) and off at 85F (29C). Running the fans only when necessary extends their service life and reduces the amount of dust drawn into the kiosk. An inline control...

The Chief PACFCB converts the FCS1U Cable Floor-to-Ceiling mount into a two-sided display solution. By mounting a pair of flat panels back-to-back, it lets content be seen from both directions in corridors, atriums, retail aisles and other open spaces where traffic flows both ways. The cable-supported FCS1U already delivers a minimal, low-profile appearance that keeps attention on the screen, and this accessory carries that clean look over to dual-sided signage. Displays can be installed in...

The Chief PACFCL adds sideways adjustability to the FCS1U Cable Floor-to-Ceiling mount. It includes a pair of interfaces, one for the ceiling and one for the floor, that attach via standard channel strut so the mount can be shifted laterally by up to 12 in (304.8 mm) after installation. That flexibility makes final alignment easier when the structure above or below does not land exactly where the display needs to be. For larger projects, long pieces of off-the-shelf channel strut can be run...

The Chief PACGB1 is a metal single gang electrical box kit intended for use with Chief mounts. It provides a standard in-wall location for power or low-voltage connections behind a mounted display, helping installers keep receptacles and cable pass-throughs organized and concealed. Choosing the box designed for Chief hardware simplifies coordination between the mount and the electrical rough-in, particularly when a display is mounted close to the wall and space behind the screen is limited....

The Chief PACHFK1 streamlines the installation of Chief's PAC501 in-wall storage box. Normally, recessing a box between studs requires framing a wood header and footer around the opening; this kit replaces that carpentry with a ready-made support structure. It installs across three studs on 16 in centers with the middle stud removed, creating a solid opening for the PAC501 without additional 2x4 framing. Knockouts are provided for routing electrical wiring, and all necessary hardware is...

The Chief PACHFK2 is the header/footer kit for Chief's PAC502 in-wall storage box. It takes the place of the wood header and footer that would otherwise be framed around the opening, so the box can be installed faster and with consistent results. The kit spans three studs on 16 in centers with the center stud removed and forms a solid support structure on its own, removing the need for extra 2x4 framing. Knockouts are built in for electrical wiring, and every piece of hardware needed is...

The Chief PACL1 is a small Lever Lock plate that fits inside the PAC525 in-wall storage box, turning the box interior into an organized, modular mounting surface. Small AV components such as media players, power bricks and signal extenders can be attached to the plate and routed neatly, keeping the space behind a flat panel tidy and serviceable. Lever Lock is designed to make adding or removing equipment straightforward, which helps when a device needs to be swapped without disturbing the rest...

The Chief PACL2 is the large Proximity Lever Lock plate for the PAC526 and PAC527L in-wall storage boxes. Installed inside the box, it provides a modular surface for mounting AV components and organizing cables, so the recessed space behind a flat panel stays neat and easy to service. With a 10 lb (4.5 kg) weight capacity, it handles heavier devices than the small PACL1, such as compact media players, extenders and power supplies grouped together. The Lever Lock approach simplifies adding,...

The Chief PACLFB is a single-sided freestanding base that lets an Impact kiosk stand on its own in open floor space rather than being attached to a wall. It supports a single portrait display, providing a stable footing for wayfinding, check-in and promotional kiosks wherever there is floor space but no suitable wall. The plate is only 0.67 in tall, keeping the transition from floor to kiosk discreet, and it measures 35.25 in wide by 28.03 in deep. With a shipping weight of about 106.5 lb...

The Chief PACLFB-B2B is a double-sided freestanding base that lets an Impact kiosk stand on its own in open floor space rather than being attached to a wall. It supports two portrait displays back-to-back, so content is visible from both approaches in corridors, lobbies and retail aisles. The plate is only 0.67 in tall, keeping the transition from floor to kiosk discreet, and it measures 35.25 in wide by 37.9 in deep. With a shipping weight of about 130 lb (59 kg), the substantial base gives...

The Chief PACLFW is a single-sided freestanding base that lets an Impact kiosk stand on its own in open floor space rather than being attached to a wall. It supports a single portrait display, providing a stable footing for wayfinding, check-in and promotional kiosks wherever there is floor space but no suitable wall. The plate is only 0.67 in tall, keeping the transition from floor to kiosk discreet, and it measures 35.25 in wide by 28.03 in deep. With a shipping weight of about 106.5 lb...

The Chief PACLFW-B2B is a double-sided freestanding base that lets an Impact kiosk stand on its own in open floor space rather than being attached to a wall. It supports two portrait displays back-to-back, so content is visible from both approaches in corridors, lobbies and retail aisles. The plate is only 0.67 in tall, keeping the transition from floor to kiosk discreet, and it measures 35.25 in wide by 37.9 in deep. With a shipping weight of about 130 lb (59 kg), the substantial base gives...

The Chief PACLK1 adds a layer of theft deterrence to Chief Fit fixed wall mounts. Fit mounts make hanging and removing a display quick, and this kit keeps that same convenience from becoming a liability in public or semi-public spaces. It includes a low-profile padlock, key and a security cable that secures the display to the mount, and a hook-and-loop fastener keeps the cable tucked out of sight behind the screen for a clean appearance. Chief lists integration with the MSB6015, RLF2 and RXF2...

The Chief PACREM pairs a Bluetooth remote with a dongle so a presenter can raise and lower a display on a Chief LPE1U or XPD1U electric height-adjust solution from across the room. Up to three heights can be preset, making it quick to move between a standing presentation position, a seated viewing height and a lowered position for touch interaction or accessibility. The remote arrives with its battery already installed, and Chief rates that battery for up to 10 years, so there is no battery to...

The Chief PACSBM provides a simple, universal way to hang a soundbar directly beneath a flat panel. Rather than mounting the soundbar separately on the wall, it connects to the display's bottom VESA mounting holes and to the rear mounting holes on the soundbar, so the speaker moves with the screen and stays perfectly aligned. Height is adjustable up to 19.65 in (499 mm), and a locking hex-key knob holds the position once it is set. The mount supports soundbars up to 15 lb (6.8 kg), includes...

The Chief PACTP1 stabilizer kit improves the feel of large interactive displays mounted on Chief PFC mobile carts and PF1 floor stands. When users tap, swipe and write on a big touch panel, the screen can bounce or sway slightly on its mount; this kit bolts to the cart or stand's tilting head unit to dampen that vibration and keep the display steady. You keep the full tilt capability of the cart or stand, and the kit adds an enhanced lock-down option for when the screen should stay fixed in...