Mounts & Racks

The Chief JWP210B is a compact J Series pitch/pivot wall mount for medium flat panel displays and monitors. Instead of an extending arm, it holds the screen close to the wall and lets it tilt and pivot to suit different viewing angles and ergonomic needs. Centris fingertip tilt gives +15/-15 degrees of smooth movement, pivot tension is independently adjustable, and a post-installation leveling roll squares the screen after it is hung. The mount body measures 8.3 x 6.0 x 3.4 inches and supports...

The Chief JWPUB is a compact J Series pitch/pivot wall mount for medium flat panel displays and monitors. Instead of an extending arm, it holds the screen close to the wall and lets it tilt and pivot to suit different viewing angles and ergonomic needs. Centris fingertip tilt gives +15/-15 degrees of smooth movement, pivot tension is independently adjustable, and a post-installation leveling roll squares the screen after it is hung. The mount body measures 8.3 x 6.0 x 3.4 inches and supports...

The Chief JWPVB is a compact J Series pitch/pivot wall mount for medium flat panel displays and monitors. Instead of an extending arm, it holds the screen close to the wall and lets it tilt and pivot to suit different viewing angles and ergonomic needs. Centris fingertip tilt gives +15/-15 degrees of smooth movement, pivot tension is independently adjustable, and a post-installation leveling roll squares the screen after it is hung. The mount body measures 8.3 x 6.0 x 3.4 inches and supports...

The Chief JWS210B is a J Series single arm wall mount that gives medium flat panel displays and monitors a useful range of motion without the reach of a full double arm. The arm extends up to 12 inches to angle the screen toward viewers and folds back to a low profile against the wall. Centris fingertip tilt provides +15/-15 degrees of smooth adjustment, the gravity-centered design holds different display weights, and pivot tension is adjustable at each joint. A post-installation leveling roll...

The Chief JWSUB is a J Series single arm wall mount that gives medium flat panel displays and monitors a useful range of motion without the reach of a full double arm. The arm extends up to 12 inches to angle the screen toward viewers and folds back to a low profile against the wall. Centris fingertip tilt provides +15/-15 degrees of smooth adjustment, the gravity-centered design holds different display weights, and pivot tension is adjustable at each joint. A post-installation leveling roll...

The Chief JWSVB is a J Series single arm wall mount that gives medium flat panel displays and monitors a useful range of motion without the reach of a full double arm. The arm extends up to 12 inches to angle the screen toward viewers and folds back to a low profile against the wall. Centris fingertip tilt provides +15/-15 degrees of smooth adjustment, the gravity-centered design holds different display weights, and pivot tension is adjustable at each joint. A post-installation leveling roll...

The Chief K0P100B is part of the Kontour K0 family of compact pitch/pivot mounts. It attaches a single display to a vertical pole between 1.50 and 1.90 inches (38.1-48.3 mm) in diameter, keeping the screen close to its support while allowing generous tilt and pivot adjustment. Chief describes the K0 family as extreme tilt mounts, meaning the screen can be angled much further than a standard tilt bracket, which suits viewers who are standing over a counter or looking up from below. The mount...

The Chief K0P100S is part of the Kontour K0 family of compact pitch/pivot mounts. It attaches a single display to a vertical pole between 1.50 and 1.90 inches (38.1-48.3 mm) in diameter, keeping the screen close to its support while allowing generous tilt and pivot adjustment. Chief describes the K0 family as extreme tilt mounts, meaning the screen can be angled much further than a standard tilt bracket, which suits viewers who are standing over a counter or looking up from below. The mount...

The Chief K0W100B is part of the Kontour K0 family of compact pitch/pivot mounts. It attaches a single display directly to the wall at a single stud, keeping the screen close to its support while allowing generous tilt and pivot adjustment. Chief describes the K0 family as extreme tilt mounts, meaning the screen can be angled much further than a standard tilt bracket, which suits viewers who are standing over a counter or looking up from below. The mount supports landscape or portrait...

The Chief K0W100S is part of the Kontour K0 family of compact pitch/pivot mounts. It attaches a single display directly to the wall at a single stud, keeping the screen close to its support while allowing generous tilt and pivot adjustment. Chief describes the K0 family as extreme tilt mounts, meaning the screen can be angled much further than a standard tilt bracket, which suits viewers who are standing over a counter or looking up from below. The mount supports landscape or portrait...

The Chief K1C110B is a Kontour K1C dynamic column mount for a single monitor. The display rides on a 1-link arm that attaches to a vertical column, so height is changed by moving the arm along the column while the arm itself handles reach and side-to-side positioning. Maximum extension is 15.7" (39.9 cm), and the arm handles displays from 5 to 25 lbs (2.27-11.34 kg) with VESA 75 x 75 or 100 x 100 mm patterns. Chief's Extreme Tilt Technology allows up to +75 degrees of tilt, useful for standing...

The Chief K1C110S is a Kontour K1C dynamic column mount for a single monitor. The display rides on a 1-link arm that attaches to a vertical column, so height is changed by moving the arm along the column while the arm itself handles reach and side-to-side positioning. Maximum extension is 15.73" (40 cm), and the arm handles displays from 5 to 25 lbs (2.27-11.34 kg) with VESA 75 x 75 or 100 x 100 mm patterns. Chief's Extreme Tilt Technology allows up to +75 degrees of tilt, useful for standing...

The Chief K1C120B is a Kontour K1C dynamic column mount for a single monitor. The display rides on a 2-link arm that attaches to a vertical column, so height is changed by moving the arm along the column while the arm itself handles reach and side-to-side positioning. Maximum extension is 22.5" (57.2 cm), and the arm handles displays from 5 to 25 lbs (2.27-11.34 kg) with VESA 75 x 75 or 100 x 100 mm patterns. Chief's Extreme Tilt Technology allows up to +75 degrees of tilt, useful for standing...

The Chief K1C120BXRH is a Kontour K1C dynamic column mount for a single monitor. The display rides on a 2-link arm that attaches to a vertical column, so height is changed by moving the arm along the column while the arm itself handles reach and side-to-side positioning. This version has a reduced-height column for spaces with limited clearance, such as under shelving or overhead storage. Maximum extension is 22.5" (57.2 cm), and the arm handles displays from 5 to 25 lbs (2.27-11.34 kg) with...

The Chief K1C120S is a Kontour K1C dynamic column mount for a single monitor. The display rides on a 2-link arm that attaches to a vertical column, so height is changed by moving the arm along the column while the arm itself handles reach and side-to-side positioning. Maximum extension is 22.5" (57.2 cm), and the arm handles displays from 5 to 25 lbs (2.27-11.34 kg) with VESA 75 x 75 or 100 x 100 mm patterns. Chief's Extreme Tilt Technology allows up to +75 degrees of tilt, useful for standing...

The Chief K1C120SXF1 combines the Kontour K1C120S single-monitor column mount with an interface for Steelcase FrameOne desking, so the arm can be fitted to FrameOne benching rather than clamped to a standard desktop. The two-link arm reaches up to 20.48 inches (52 cm) and the display moves up and down the column for height adjustment, with Chief listing 7 inches (177.8 mm) of manual height travel for this configuration. It carries one display from 5 to 25 lbs (2.27-11.34 kg), with typical...

The Chief K1C120SXRH is a reduced-height version of the Kontour K1C dynamic column mount, built for a single monitor where a full-height pole would look out of place or interfere with shelving, windows or overhead storage. A two-link articulating arm reaches up to 22.5 in and folds back to a 2.45 in minimum depth. Height assist makes vertical changes smooth, and Chief's Extreme Tilt Technology allows +75 to -10 degrees of tilt for sharing a screen across the desk or tipping it nearly flat. It...

The Chief K1C210B is a Kontour K1C desk column mount that carries two monitors side by side on single-link arms. Each display can be raised or lowered along the column with height-assist tension, extended up to 13.9 in, swiveled, and tilted from +75 to -10 degrees, so users can set up a comfortable dual-screen workstation without stacking monitor feet on the desk. Both positions accept 10-24 in displays weighing 5 - 25 lbs (2.3 - 11.3 kg) and fit VESA 75 x 75 or 100 x 100 mm patterns, in...

The Chief K1C210S is a Kontour K1C desk column mount that carries two monitors side by side on single-link arms. Each display can be raised or lowered along the column with height-assist tension, extended up to 13.9 in, swiveled, and tilted from +75 to -10 degrees, so users can set up a comfortable dual-screen workstation without stacking monitor feet on the desk. Both positions accept 10-24 in displays weighing 5 - 25 lbs (2.3 - 11.3 kg) and fit VESA 75 x 75 or 100 x 100 mm patterns, in...

The Chief K1C210SXF1 is a Kontour™ K1C column mount that is fitted with a Steelcase® FrameOne™ interface and places two displays at a comfortable, adjustable viewing position. This configuration adds a Steelcase® FrameOne™ interface bracket so the mount integrates directly with FrameOne benching and workstation systems. Height Assist lets users raise or lower the screens with a light touch, while extension, swivel and tilt fine-tune the view for sitting or standing work. Chief's Extreme Tilt...

The Chief K1C220B is a Kontour™ K1C column mount that stands on a desktop base and places two displays at a comfortable, adjustable viewing position. Height Assist lets users raise or lower the screens with a light touch, while extension, swivel and tilt (+75°/-10°) fine-tune the view for sitting or standing work. Rated weight capacity is 5 - 25 lb with typical screen sizes of 10"-32". Maximum extension is 20.6 in. Landscape and portrait orientation are both supported. Finished in black to...

The Chief K1C220B-G is a Kontour™ K1C column mount that stands on a desktop base and places two displays at a comfortable, adjustable viewing position. This -G part number is the TAA-compliant version, a good fit for government and education purchasing. Height Assist lets users raise or lower the screens with a light touch, while extension, swivel and tilt (+75°/-10°) fine-tune the view for sitting or standing work. Rated weight capacity is 5 - 25 lb with typical screen sizes of 10"-30"....

The Chief K1C220BXRH is a Kontour™ K1C column mount that stands on a desktop base and places two displays at a comfortable, adjustable viewing position. This reduced-height version uses a shorter build that keeps the displays lower, which suits shallow sightlines, lower work surfaces or spaces under shelving. Height Assist lets users raise or lower the screens with a light touch, while extension, swivel and tilt (+75°/-10°) fine-tune the view for sitting or standing work. Rated weight capacity...

The Chief K1C220S is a Kontour™ K1C column mount that stands on a desktop base and places two displays at a comfortable, adjustable viewing position. Height Assist lets users raise or lower the screens with a light touch, while extension, swivel and tilt (+75°/-10°) fine-tune the view for sitting or standing work. Rated weight capacity is 5 - 25 lb with typical screen sizes of 10"-32". Maximum extension is 20.6 in. Landscape and portrait orientation are both supported. Finished in silver to...