Mounts & Racks

The Chief HSMS is an add-on tablet accessory for Chief's Health Protocol tablet floor stands. It mounts a second device, typically a tablet or compact monitor around 15 inches diagonal and up to 5 lbs (2.3 kg), on the stand alongside the main screening or check-in device. That lets a single entrance station show occupancy information, collect visitor sign-ins or run a second app while the primary device does its job. The accessory is finished in silver to match the stands and is TAA compliant....

The Chief HSPS adds a printer to a Chief Health Protocol tablet floor stand. It is a shelf sized for the Brother TD2020 desktop label printer, so a check-in or screening station can print visitor badges, confirmation slips or pass stickers right where people are processed. The shelf supports up to 3 lbs (1.4 kg), is finished in silver to match the stand and is TAA compliant. It is an accessory only: the floor stand and the printer are sold separately. Chief's application photos show the HSPS...

Chief's Health Protocol tablet stands (Tablet Stand Series) were built to hold check-in tablets, thermal screening devices, sensors and similar technology at building entrances. The HTSTS brings the same idea to a reception desk or counter. A short column holds a column-mount device, such as a thermal screening mirror or tablet, with its center about 15 inches (38.1 cm) above the table surface. Cabling runs inside the hollow column, and the base can be bolted down where devices need to stay...

Chief's Health Protocol tablet stands (Tablet Stand Series) were built to hold check-in tablets, thermal screening devices, sensors and similar technology at building entrances. The HTSVS is the countertop VESA model. It accepts tablets in VESA enclosures, interactive touch monitors and small displays with a 75 x 75 mm or 100 x 100 mm pattern, up to about 22 inches and 15 lbs (6.8 kg). Chief designed the column so equipment and cabling can be tucked inside it, keeping the counter clean, and...

The Chief HVPS is the printer accessory for the HFSVS VESA tablet floor stand. It provides a shelf for the Brother TD2020 desktop label printer, letting staff or visitors print confirmations, ID badges, stickers and similar items right at a check-in or screening location. Chief built it to help streamline entrance procedures while keeping the station neat and self-contained. The shelf carries up to 5 lbs (2.3 kg), is finished in silver to match the stand and is TAA compliant. Accessory only:...

The Chief JHS210B is a J Series ceiling mount for medium flat panel displays, typically 20 to 43 inches and up to 75 lbs (34 kg). It suspends a single screen in landscape orientation, swivels to aim the display where viewers are, and offers post-installation roll leveling so the image can be squared up after the mount is hung. Its included interface accepts VESA 100 x 100, 200 x 100 and 200 x 200 mm patterns. The mount is finished in black and is UL Listed and TAA compliant. A J Series ceiling...

The Chief JHSUB is a J Series ceiling mount for medium flat panel displays, typically 20 to 43 inches and up to 75 lbs (34 kg). It suspends a single screen in landscape orientation, swivels to aim the display where viewers are, and offers post-installation roll leveling so the image can be squared up after the mount is hung. Its universal interface adapts to mounting patterns from 100 x 100 up to 400 x 400 mm, including many non-standard layouts. The mount is finished in black and is UL...

The Chief JHSVB is a J Series ceiling mount for medium flat panel displays, typically 20 to 43 inches and up to 75 lbs (34 kg). It suspends a single screen in landscape orientation, swivels to aim the display where viewers are, and offers post-installation roll leveling so the image can be squared up after the mount is hung. Its included VESA interface accepts 100 x 100, 200 x 100, 200 x 200 and 400 x 200 mm patterns. The mount is finished in black and is UL Listed and TAA compliant. A J...

The Chief JPP210B is a J Series pivot/tilt mount that attaches a medium flat panel to an existing pole or column. It clamps to round poles from 1.5 to 2 inches (3.81 to 5.08 cm) in diameter and supports a single landscape display, typically 26 to 45 inches and up to 75 lbs (34 kg). The head pivots and tilts so the screen can be aimed toward the audience, and post-installation roll leveling lets you square the picture once it is hung. The included interface fits VESA 100 x 100, 200 x 100 and...

The Chief JPPUB is a J Series pivot/tilt mount that attaches a medium flat panel to an existing pole or column. It clamps to round poles from 1.5 to 2 inches (3.81 to 5.08 cm) in diameter and supports a single landscape display, typically 26 to 45 inches and up to 75 lbs (34 kg). The head pivots and tilts so the screen can be aimed toward the audience, and post-installation roll leveling lets you square the picture once it is hung. The universal interface adapts to patterns from 100 x 100 up...

The Chief JPPVB is a J Series pivot/tilt mount that attaches a medium flat panel to an existing pole or column. It clamps to round poles from 1.5 to 2 inches (3.81 to 5.08 cm) in diameter and supports a single landscape display, typically 26 to 45 inches and up to 75 lbs (34 kg). The head pivots and tilts so the screen can be aimed toward the audience, and post-installation roll leveling lets you square the picture once it is hung. The included VESA interface fits 100 x 100, 200 x 100, 200 x...

The Chief JSB2090B is a custom interface bracket made for the Cisco EX90 desktop video conferencing unit. The EX90 does not mount like an ordinary monitor, so this bracket captures the unit and presents a 200 x 200 mm VESA threaded-stud pattern on the back that connects to Chief Thinstall swing arms and compatible wall mounts. That frees desk space and lets users pull the EX90 into position for calls. An optional shelf is included to hold the telephone handset and touch panel that ship with...

The Chief JSB210B is a vesa 200x200 interface bracket for Chief's J Series medium flat panel mounts, the family that includes J Series ceiling mounts, pivot/tilt pole mounts and articulating wall arms. The interface is the part that bolts to the back of the display and then attaches to the mount, so swapping it lets you fit a different screen to an existing J Series installation or replace a lost or damaged bracket. It accepts displays with a VESA 200 x 100 or 200 x 200 mm pattern. The bracket...

The Chief JSBUB is a universal interface bracket for Chief's J Series medium flat panel mounts, the family that includes J Series ceiling mounts, pivot/tilt pole mounts and articulating wall arms. The interface is the part that bolts to the back of the display and then attaches to the mount, so swapping it lets you fit a different screen to an existing J Series installation or replace a lost or damaged bracket. Its adjustable universal design adapts to mounting patterns up to 400 x 400 mm,...

The Chief JSBVB is a vesa 400x200 interface bracket for Chief's J Series medium flat panel mounts, the family that includes J Series ceiling mounts, pivot/tilt pole mounts and articulating wall arms. The interface is the part that bolts to the back of the display and then attaches to the mount, so swapping it lets you fit a different screen to an existing J Series installation or replace a lost or damaged bracket. It accepts displays with VESA 200 x 100, 200 x 200, 300 x 200 and 400 x 200 mm...

The Chief JWD210B is a J Series articulating wall arm that gives a medium flat panel a wide range of motion, so the screen can be pulled out and angled toward viewers in different parts of a room. The arm extends up to 20 inches and folds back to a low 2.7-inch (6.9 cm) profile when not in use. Chief's Centris fingertip tilt (+15 to -15 degrees) uses gravity-centered balance to hold different display weights, and tension at each pivot is independently adjustable. The included interface fits...

The Chief JWDIW210B is a J Series swing arm mount built to recess into the wall cavity, so the folded arm and display sit almost flush with the wall surface. Chief lists a minimum depth of just 0.1 inch (0.3 cm) when the arm is stowed. Pull the display out on the 21 inch arm to angle it toward viewers, then push it back when finished. The mount is rated for 75 lbs (34 kg) and is aimed at typical screen sizes from 26 to 45 inches. Tilt is +15/-15 degrees, and a post-installation leveling roll...

The Chief JWDIWUB is a J Series swing arm mount built to recess into the wall cavity, so the folded arm and display sit almost flush with the wall surface. Chief lists a minimum depth of just 0.1 inch (0.3 cm) when the arm is stowed. Pull the display out on the 21 inch arm to angle it toward viewers, then push it back when finished. The mount is rated for 75 lbs (34 kg) and is aimed at typical screen sizes from 26 to 45 inches. Tilt is +15/-15 degrees, and a post-installation leveling roll...

The Chief JWDIWVB is a J Series swing arm mount built to recess into the wall cavity, so the folded arm and display sit almost flush with the wall surface. Chief lists a minimum depth of just 0.1 inch (0.3 cm) when the arm is stowed. Pull the display out on the 21 inch arm to angle it toward viewers, then push it back when finished. The mount is rated for 75 lbs (34 kg) and is aimed at typical screen sizes from 26 to 45 inches. Tilt is +15/-15 degrees, and a post-installation leveling roll...

The Chief JWDSK210B packages a J Series dual swing arm for installation on steel (metal) stud walls. A wide wall plate spans 16, 20 or 24 inch on-center steel studs, so the load is spread across two studs instead of relying on a single member. The arm extends just over 20 inches (517 mm) to bring the display toward the viewer and folds back close to the wall when not in use. Centris fingertip tilt provides +15/-15 degrees of adjustment, with a post-installation leveling roll for final...

The Chief JWDSKUB packages a J Series dual swing arm for installation on steel (metal) stud walls. A wide wall plate spans 16, 20 or 24 inch on-center steel studs, so the load is spread across two studs instead of relying on a single member. The arm extends just over 20 inches (517 mm) to bring the display toward the viewer and folds back close to the wall when not in use. Centris fingertip tilt provides +15/-15 degrees of adjustment, with a post-installation leveling roll for final alignment....

The Chief JWDSKVB packages a J Series dual swing arm for installation on steel (metal) stud walls. A wide wall plate spans 16, 20 or 24 inch on-center steel studs, so the load is spread across two studs instead of relying on a single member. The arm extends just over 20 inches (517 mm) to bring the display toward the viewer and folds back close to the wall when not in use. Centris fingertip tilt provides +15/-15 degrees of adjustment, with a post-installation leveling roll for final alignment....

The Chief JWDUB is a J Series swing arm wall mount for medium flat panel displays and monitors. Its double-link arm pulls the screen up to 20 inches from the wall and swings it toward different seating positions, then folds back to a 2.7 inch profile when not in use. Chief's Centris fingertip tilt gives +15/-15 degrees of smooth tilt, and the gravity-centered design holds displays of different weights in position. Each pivot has its own tension adjustment, and a post-installation leveling roll...

The Chief JWDVB is a J Series swing arm wall mount for medium flat panel displays and monitors. Its double-link arm pulls the screen up to 20 inches from the wall and swings it toward different seating positions, then folds back to a 2.7 inch profile when not in use. Chief's Centris fingertip tilt gives +15/-15 degrees of smooth tilt, and the gravity-centered design holds displays of different weights in position. Each pivot has its own tension adjustment, and a post-installation leveling roll...