Smart Lighting

The Lutron DVSCTV-MN is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Midnight. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-PB is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Pebble. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-PM is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Pumice. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-RW is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Architectural White. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV...

The Lutron DVSCTV-SA is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Sage. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to 277V...

The Lutron DVSCTV-SD is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Sand. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to 277V...

The Lutron DVSCTV-SL is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Slate. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to 277V...

The Lutron DVSCTV-SR is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Signal Red. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-SW is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Snow White. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-TF is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Truffle. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to...

The Lutron DVSCTV-TP is a Diva 0-10V dimmer built for low-voltage control wiring, finished in satin Taupe. The paddle and switch circuit operate at 24V and must never be connected to line voltage. It dims 0-10V LED drivers and fluorescent ballasts over a Class 2 control link that sinks up to 30mA, enough for as many as 15 compliant drivers.Because the control itself does not carry line voltage, it is paired with a Lutron power pack that does the actual load switching: the PP-DV for 120 to 277V...

The Lutron DVSTV-453PH-WH is a Diva 0-10V dimmer in gloss White, sized for smaller fixture groups. A large Diva paddle handles on/off while a captive slider sets the 0-10V signal for third-party LED drivers and fluorescent ballasts with a sinking 0-10V input.The control operates on 120 to 277V and switches the load directly, with a 450W switching rating (3.75A at 120V, 1.62A at 277V), so no power pack is needed. The dimming link sinks up to 50mA. Lutron lists this version in white gloss only....

The Lutron DVSTV-AL is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-BL is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-BR is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-GR is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-IV is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-LA is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVSTV-WH is a Diva 0-10V dimmer built for commercial and residential fixtures that use 0-10V LED drivers or electronic fluorescent ballasts. Unlike low-voltage-only 0-10V controls, this model has an internal line-voltage switching relay, so it turns the lighting circuit on and off itself and handles up to 8A at 120 to 277V without a separate power pack. The low-voltage purple/gray pair carries the dimming signal and can sink up to 50mA, enough for as many as 25 drivers or ballasts...

The Lutron DVTV-AL is the low-voltage member of the Diva 0-10V family. It runs entirely on a 24V Class 2 circuit: one pair of wires sends the 0-10V dimming signal to the fixtures, and a second low-voltage output drives the relay in a separate power pack that actually switches the line-voltage lighting. Because nothing at the wallbox carries line voltage, the control is a good fit where Class 2 wiring is preferred, where the switched load is larger than a line-voltage dimmer can handle, or...

The Lutron DVTV-BL is the low-voltage member of the Diva 0-10V family. It runs entirely on a 24V Class 2 circuit: one pair of wires sends the 0-10V dimming signal to the fixtures, and a second low-voltage output drives the relay in a separate power pack that actually switches the line-voltage lighting. Because nothing at the wallbox carries line voltage, the control is a good fit where Class 2 wiring is preferred, where the switched load is larger than a line-voltage dimmer can handle, or...

The Lutron DVTV-BR is the low-voltage member of the Diva 0-10V family. It runs entirely on a 24V Class 2 circuit: one pair of wires sends the 0-10V dimming signal to the fixtures, and a second low-voltage output drives the relay in a separate power pack that actually switches the line-voltage lighting. Because nothing at the wallbox carries line voltage, the control is a good fit where Class 2 wiring is preferred, where the switched load is larger than a line-voltage dimmer can handle, or...

The Lutron DVTV-GR is the low-voltage member of the Diva 0-10V family. It runs entirely on a 24V Class 2 circuit: one pair of wires sends the 0-10V dimming signal to the fixtures, and a second low-voltage output drives the relay in a separate power pack that actually switches the line-voltage lighting. Because nothing at the wallbox carries line voltage, the control is a good fit where Class 2 wiring is preferred, where the switched load is larger than a line-voltage dimmer can handle, or...

The Lutron DVTV-IV is the low-voltage member of the Diva 0-10V family. It runs entirely on a 24V Class 2 circuit: one pair of wires sends the 0-10V dimming signal to the fixtures, and a second low-voltage output drives the relay in a separate power pack that actually switches the line-voltage lighting. Because nothing at the wallbox carries line voltage, the control is a good fit where Class 2 wiring is preferred, where the switched load is larger than a line-voltage dimmer can handle, or...