Amplifiers

The Lab Gruppen IPX 2400 is a compact two-channel power amplifier that puts 2 x 1200 W at 4 ohms and a full DSP engine into one rack unit. It is aimed at permanent installations first, yet is equally at home in portable corporate AV rigs and live PA systems. Processing covers up to 40 real-time parametric EQs, gain, input and output delay, crossover-style high- and low-pass filters and a Speaker Protect Limiter, all adjustable from the front panel or over Ethernet with the free IPX Controller...

The Lab Gruppen IPX 4800 is a compact two-channel power amplifier that puts 2 x 2400 W at 4 ohms and a full DSP engine into one rack unit. It is aimed at permanent installations first, yet is equally at home in portable corporate AV rigs and live PA systems. Processing covers up to 40 real-time parametric EQs, gain, input and output delay, crossover-style high- and low-pass filters and a Speaker Protect Limiter, all adjustable from the front panel or over Ethernet with the free IPX Controller...

The Lab Gruppen LUCIA 120/1-70 is a compact installation amplifier from the LUCIA family, designed for decentralized systems where power is placed close to the loudspeakers. This mono model delivers 120 W into high-impedance 70 V distributed loudspeaker lines, so one compact unit can drive a run of ceiling or wall speakers. A digital front end adds a 2x1 mix matrix with DSP, including Automatic Dynamic Loudness Contouring and EQ ahead of and after the matrix. Setup is handled by a software...

The Lab Gruppen LUCIA 120/2 is a compact installation amplifier from the LUCIA family, designed for decentralized systems where power is placed close to the loudspeakers. This two-channel model provides 2 x 60 W of low-impedance power, and Auto Load Sense adapts each channel to loads from 2 to 8 ohms, up to eight 16-ohm loudspeakers per channel. A digital front end adds a 2x2 mix matrix with DSP, including Automatic Dynamic Loudness Contouring and EQ ahead of and after the matrix. Setup is...

The Lab Gruppen LUCIA 120/2M is a compact installation amplifier from the LUCIA family, designed for decentralized systems where power is placed close to the loudspeakers. The M version steps up to a larger 4x4 matrix for more flexible source mixing, while its two channels deliver 2 x 60 W with Auto Load Sense handling 2 to 8 ohm loads. A digital front end adds a 4x4 mix matrix with DSP, including Automatic Dynamic Loudness Contouring and EQ ahead of and after the matrix. Setup is handled by a...

The Lab Gruppen LUCIA 240/1-70 is the 70 V member of the LUCIA compact installation amplifier family, delivering 240 W of mono power to high-impedance distributed loudspeaker lines. Rather than sitting in a central rack, it is small enough to mount on a wall, under a counter or above a ceiling close to the zone it serves, cutting long speaker runs and simplifying system design.Inside, a digital front end provides a 2 x 1 mix matrix so two sources can be combined to mono or switched, along with...

The Lab Gruppen LUCIA 240/2 is a small-format installation amplifier from the LUCIA (Localized Utility Compact Intelligent Amplification) family, built to put power, processing and control right where the loudspeakers are instead of in a central equipment room. It delivers 2 x 120 W and combines a firmware-controlled digital front end with a high-efficiency output stage.Its 2 x 2 matrix lets you route or mix the two inputs to either output, covering stereo playback or two independent mono...

The Lab Gruppen LUCIA 240/2M is a small-format installation amplifier from the LUCIA (Localized Utility Compact Intelligent Amplification) family, built to put power, processing and control right where the loudspeakers are instead of in a central equipment room. It delivers 2 x 120 W and combines a firmware-controlled digital front end with a high-efficiency output stage.This matrix version adds two extra inputs, so up to four sources can be mixed or routed to either output channel - ideal for...

The Lab Gruppen LUCIA 60/1-70 is the 70 V member of the LUCIA compact installation amplifier family, delivering 60 W of mono power to high-impedance distributed loudspeaker lines. Rather than sitting in a central rack, it is small enough to mount on a wall, under a counter or above a ceiling close to the zone it serves, cutting long speaker runs and simplifying system design.Inside, a digital front end provides a 2 x 1 mix matrix so two sources can be combined to mono or switched, along with...

The Lab Gruppen LUCIA 60/2 is a small-format installation amplifier from the LUCIA (Localized Utility Compact Intelligent Amplification) family, built to put power, processing and control right where the loudspeakers are instead of in a central equipment room. It delivers 2 x 30 W and combines a firmware-controlled digital front end with a high-efficiency output stage.Its 2 x 2 matrix lets you route or mix the two inputs to either output, covering stereo playback or two independent mono zones....

The Lab Gruppen LUCIA 60/2M is a small-format installation amplifier from the LUCIA (Localized Utility Compact Intelligent Amplification) family, built to put power, processing and control right where the loudspeakers are instead of in a central equipment room. It delivers 2 x 30 W and combines a firmware-controlled digital front end with a high-efficiency output stage.This matrix version adds two extra inputs, so up to four sources can be mixed or routed to either output channel - ideal for...

The Lab Gruppen CA1201 is a single-channel, 120-watt installed-sound amplifier built for background music and paging in places like restaurants, bars, shops, hotels, offices and classrooms. It drives either traditional low-impedance speakers (4 or 8 ohm) or a 70 V / 100 V constant-voltage line, chosen with rear-panel dipswitches, so one model suits many system designs. Operation is intentionally simple for non-technical staff, and an automatic sleep mode helps keep energy use down, backed by...

The Lab Gruppen CA2402 is a two-channel commercial power amplifier delivering 240 W per channel. It is a straight power amplifier rather than a mixer: you feed it from an upstream mixer, processor or music source and it drives the speakers. That makes it a good fit for restaurants, bars, retail stores, hotels, schools and corporate spaces that need to power two zones, or one large zone, with either low-impedance speakers or a 70 V / 100 V distributed line.Output mode is set with rear...

The Lab Gruppen CA601 is the compact entry point in the CA commercial amplifier line: a single-channel, 60-watt amp for small cafes, boutiques, offices, treatment rooms and other spaces that need steady background music or simple paging. It works with low-impedance speakers at 4 or 8 ohm, or with 70 V / 100 V constant-voltage speaker lines, selected by dipswitch, which also sets maximum output voltage and gain. Staff only need the power button and master volume, while an Energy Star-certified...

The Lab Gruppen CM41 is a compact commercial mixer with four inputs and one output, designed to give small and mid-size venues a straightforward way to blend background music and microphone or paging sources. Typical homes include bars, restaurants, retail shops, hotels, offices and schools. It is meant to be installed once and left alone, so even non-technical staff can live with it. Balanced inputs use 3-pin Euroblock connectors, stereo consumer sources connect through RCA and are summed to...

For venues that need more sources than a basic mixer allows, the Lab Gruppen CM82 offers eight inputs and two outputs in a compact installed-sound package. It suits bars, restaurants, retail stores, hotels, corporate offices and schools where background music, microphones and paging all share one system. Balanced sources connect on 3-pin Euroblock inputs, stereo players use RCA connections that are summed to mono, and Euroblock line outputs send the mix on to commercial amplifiers or other...

The Lab Gruppen CMA1201 combines a four-input mixer and a 120 W power amplifier in one compact chassis, making it a practical choice for small distributed-audio installations. It suits bars, restaurants, retail shops, hotels, offices and classrooms where background music or paging needs to reach a handful of speakers without a rack full of separate gear.The single output can drive either low-impedance speakers (4 or 8 ohm) or a 70 V / 100 V constant-voltage line, chosen with rear dipswitches....

The QSC CX-Q 2K4 is a four-channel network power amplifier for the Q-SYS Ecosystem, suited to small and mid-size multi-zone installs in retail, restaurants, offices and worship spaces. Its four independent channels drive low-impedance loads or 70V/100V constant-voltage lines, with flexible power distribution and up to 2000 W total output. Native Q-LAN networking carries audio, control and monitoring, and four mic/line inputs provide additional analog on-ramps into the Q-SYS platform.Key...

The QSC CX-Q 4K4 is a four-channel network power amplifier for the Q-SYS Ecosystem, aimed at installs that need higher per-channel power across four zones, such as larger worship spaces, ballrooms and performance venues. Each channel is independent and can drive low-impedance loads or 70V/100V constant-voltage lines, delivering up to 1000 W per channel and up to 4000 W total. Native Q-LAN networking handles audio transport, control and monitoring within the Q-SYS platform.Key FeaturesFour...

The QSC CX-Q 4K8 is an eight-channel network power amplifier for the Q-SYS Ecosystem, built for integrators deploying multi-zone commercial audio in venues, houses of worship, hospitality and corporate spaces. Each of its eight channels operates independently and can drive low-impedance loads (8/4/2 ohm) or 70V/100V constant-voltage lines, with flexible power distribution across channels and up to 4000 W total output. Native Q-LAN networking provides audio transport, control and monitoring,...

The QSC CX-Q 8K4 is a four-channel network amplifier for the Q-SYS ecosystem, positioned near the top of the CX-Q range with 8000 W of total output across its four channels. It suits large installed-sound applications—auditoriums, arenas, houses of worship, stadiums and multi-zone commercial spaces—where high headroom and centralized Q-SYS management are required.Key FeaturesFour independent channels delivering 8000 W total system powerLo-Z, 70V and 100V direct-drive output...

The QSC CX-Q 8K8 is an eight-channel network amplifier built for the Q-SYS ecosystem, aimed at commercial and installed audio systems that need flexible, high-density amplification managed over the network. It connects natively via Q-LAN and drives loudspeakers in low-impedance, 70V or 100V modes with direct-drive constant-voltage outputs, so no output transformers are needed. QSC's FlexAmp power-sharing lets the total power be distributed across channels to match each zone's needs, and the...

The QSC CX-Qn 2K4 is a four-channel network power amplifier for the Q-SYS Ecosystem. It shares the CX-Q 2K4's four independent channels, flexible power distribution up to 2000 W total, and support for low-impedance, 70V and 100V loads, but the 'Qn' designation means it is network-input only: it omits the analog mic/line inputs found on the 'Q' models to lower system cost. Audio, control and monitoring all travel over Q-LAN, making it a streamlined choice for designs where all sources arrive...

The QSC CX-Qn 4K4 is a four-channel network amplifier built for the Q-SYS ecosystem, and the "n" designation adds native Dante audio transport alongside Q-LAN. It is aimed at systems integrators building networked audio for venues such as houses of worship, corporate campuses, retail, hospitality and performing-arts spaces where amplifiers must be managed as part of a larger Q-SYS design.Key FeaturesFour independent output channels with up to 1000 W per channelFlexible Lo-Z, 70V and...