Amplifiers

The Attero Tech by QSC Axiom AXP2O is an audio expansion module that adds two balanced analog line-level outputs to an Axiom host device (such as the ML1 or unBT2A). It is a networked-system accessory/endpoint rather than a standalone processor: it connects to its host over a single Axiom port cable that carries audio, RS-232 control and DC power.Key FeaturesTwo balanced analog outputs on 3.81 mm depluggable terminal blocksConnects to an Axiom host device via one 8P8C Axiom port cableAxiom...

The Bluesound Professional B170S combines a BluOS network music player with a stereo amplifier that can drive either low-impedance loudspeakers or 70V and 100V constant-voltage lines. That makes it a single-box zone for hallways, back-of-house areas and large ceiling-speaker layouts where many small speakers share one run.It mounts on its own or alongside up to five more units in a 3U rack space using the optional RM160 rack system.Key FeaturesSelectable low-impedance or constant-voltage...

The Blustream NPA100DA is a networked zone amplifier with Dante integration for commercial and residential AV. It drives 2 x 50W or 1 x 100W into 4/8 ohm speakers, or runs 70V/100V constant voltage for multi-speaker lines over long cable runs, and adds an LFE output for a subwoofer.Inputs cover Dante/AES67, HDMI ARC with CEC volume control, a microphone with phantom power and auto-ducking, balanced/unbalanced analogue and optical S/PDIF. It can run on PoE++ from the Dante port or from its...

The Blustream NPA20ANA is an ultra-compact networked amplifier for small zones or voice reinforcement. It accepts balanced or unbalanced 2-channel analogue audio and delivers 2 x 10W or 1 x 20W into 4/8 ohm speakers.It can be powered by PoE or PoE+ from a compatible switch, or locally from a 24V supply that is sold separately; Blustream notes amplifier output is limited on PoE. A 31-band EQ, lip-sync delay and master/slave daisy-chaining of up to four NPA20 amplifiers round out the package.Key...

The Blustream NPA20ARC is an ultra-compact networked amplifier for small zones or voice reinforcement. It connects to any ARC-capable display over HDMI, takes 2-channel audio from it and follows the display for control, delivering 2 x 10W or 1 x 20W into 4/8 ohm speakers.It can be powered by PoE or PoE+ from a compatible switch, or locally from a 24V supply that is sold separately; Blustream notes amplifier output is limited on PoE. A 31-band EQ, lip-sync delay and master/slave daisy-chaining...

The Blustream NPA20DA is a mini networked amplifier that takes two channels of Dante/AES67 audio straight from the network and drives 2 x 10W or 1 x 20W into 4/8 ohm speakers. A single network cable can carry both audio and power when connected to a PoE+ switch.Blustream notes amplifier output can be reduced depending on PoE capability; a 24V local supply (sold separately) can be used instead. A 31-band EQ and audio delay help tune each zone.Key Features2-ch Dante/AES67 input2 x 10W or 1 x 20W...

The Blustream NPA70DA is a Dante networked zone amplifier for commercial and residential AV. It drives 2 x 35W or 1 x 70W into 4/8 ohm speakers, or 70V/100V constant voltage for multi-speaker runs over longer cables.It can be powered by PoE++ over the Dante LAN connection or by its included 24V supply; Blustream notes output is reduced on PoE+. Separate Dante and control network ports can also be combined onto one LAN.Key Features2-ch Dante/AES67 input2 x 35W or 1 x 70W at 4/8 ohm, or...

The KEF KASA500 Amplifier is part of KEF's architectural speaker accessories range, supplied here as each.Finish / variant: Gray 2U Rack Ears included.

The Lab Gruppen CA1202 is a dual-channel commercial power amplifier rated at 2 x 120 W, built for distributed background music and paging where running costs matter. It carries Energy Star certification, and Lab Gruppen's direct-drive constant-power design is intended to draw less mains power, which can make it easier to reuse existing electrical circuits. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a...

The Lab Gruppen CA602 is a dual-channel commercial power amplifier rated at 2 x 60 W, built for distributed background music and paging where running costs matter. It carries Energy Star certification, and Lab Gruppen's direct-drive constant-power design is intended to draw less mains power, which can make it easier to reuse existing electrical circuits. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a...

The Lab Gruppen CMA1202 is a dual-channel commercial mixer amplifier rated at 2 x 120 W with 8 inputs, designed to give small and mid-size venues a straightforward source-to-speaker solution for background music and public address with modest energy consumption. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally...

The Lab Gruppen CMA2402 is a dual-channel commercial mixer amplifier rated at 2 x 240 W with 8 inputs, designed to give small and mid-size venues a straightforward source-to-speaker solution for background music and public address with modest energy consumption. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally...

The Lab Gruppen CMA602 is a dual-channel commercial mixer amplifier rated at 2 x 60 W with 8 inputs, designed to give small and mid-size venues a straightforward source-to-speaker solution for background music and public address with modest energy consumption. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally...

The Lab Gruppen CPA1201 is a commercial mixer amplifier rated at 120 W with 5 inputs, Bluetooth streaming and a USB media player with LCD navigation, so music can come from a phone, tablet, laptop or USB stick without extra source equipment. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally simple for non-technical...

The Lab Gruppen CPA1202 is a dual-channel commercial mixer amplifier rated at 2 x 120 W with 8 inputs, Bluetooth streaming and a USB media player with LCD navigation, so music can come from a phone, tablet, laptop or USB stick without extra source equipment. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally simple...

The Lab Gruppen CPA2401 is a commercial mixer amplifier rated at 240 W with 5 inputs, Bluetooth streaming and a USB media player with LCD navigation, so music can come from a phone, tablet, laptop or USB stick without extra source equipment. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally simple for non-technical...

The Lab Gruppen CPA2402 is a dual-channel commercial mixer amplifier rated at 2 x 240 W with 8 inputs, Bluetooth streaming and a USB media player with LCD navigation, so music can come from a phone, tablet, laptop or USB stick without extra source equipment. Each output can be set with DIP switches for 4 ohm or 8 ohm low-impedance loudspeakers or for 70 V and 100 V distributed lines, and a built-in high-pass filter can be engaged for constant-voltage systems. Operation is intentionally simple...

The Lab Gruppen FA1202 is a dual-channel commercial amplifier rated at 2 x 120W, designed for background music and paging systems where low energy use and simple operation matter. Its Direct Drive constant-power design is Energy Star certified and draws less from the mains, which can reduce running costs and may let the system work on existing electrical circuits. Each channel can drive 4 or 8 ohm loudspeakers or 70V and 100V distributed lines, set by DIP switches on the unit, with a built-in...

The Lab Gruppen FA2402 is a two-channel, 2 x 240 W amplifier from the FA Series of commercial install products, built to make distributed audio simple to specify and simple to live with. Each channel can be set by rear-panel dipswitch for low-impedance 4 or 8 ohm loudspeakers or for 70 V and 100 V constant-voltage lines, so one model covers most small and mid-size zones. Direct Drive constant power technology reduces mains consumption enough to earn Energy Star certification, and the unit...

The Lab Gruppen FA602 is a two-channel, 2 x 60 W amplifier from the FA Series of commercial install products, built to make distributed audio simple to specify and simple to live with. Each channel can be set by rear-panel dipswitch for low-impedance 4 or 8 ohm loudspeakers or for 70 V and 100 V constant-voltage lines, so one model covers most small and mid-size zones. Direct Drive constant power technology reduces mains consumption enough to earn Energy Star certification, and the unit drops...

The Lab Gruppen FAD1202 is a two-channel, 2 x 120 W amplifier from the FAD Series of commercial install products, built to make distributed audio simple to specify and simple to live with. Each channel can be set by rear-panel dipswitch for low-impedance 4 or 8 ohm loudspeakers or for 70 V and 100 V constant-voltage lines, so one model covers most small and mid-size zones. Dante networking lets the amplifier pick up audio directly from an IP network instead of analog runs. Direct Drive...

The Lab Gruppen FAD2402 is a two-channel, 2 x 240 W amplifier from the FAD Series of commercial install products, built to make distributed audio simple to specify and simple to live with. Each channel can be set by rear-panel dipswitch for low-impedance 4 or 8 ohm loudspeakers or for 70 V and 100 V constant-voltage lines, so one model covers most small and mid-size zones. Dante networking lets the amplifier pick up audio directly from an IP network instead of analog runs. Direct Drive...

The Lab Gruppen FAD602 is a two-channel, 2 x 60 W amplifier from the FAD Series of commercial install products, built to make distributed audio simple to specify and simple to live with. Each channel can be set by rear-panel dipswitch for low-impedance 4 or 8 ohm loudspeakers or for 70 V and 100 V constant-voltage lines, so one model covers most small and mid-size zones. Dante networking lets the amplifier pick up audio directly from an IP network instead of analog runs. Direct Drive constant...

The Lab Gruppen IPX 1200 is a compact two-channel power amplifier that puts 2 x 600 W at 4 ohms and a full DSP engine into one rack unit. It is aimed at permanent installations first, yet is equally at home in portable corporate AV rigs and live PA systems. Processing covers up to 40 real-time parametric EQs, gain, input and output delay, crossover-style high- and low-pass filters and a Speaker Protect Limiter, all adjustable from the front panel or over Ethernet with the free IPX Controller...