Mounts & Racks

The Chief TILSC2HAP adds a finished edge to TiLED direct-view LED video walls built with Absen Acclaim Plus and Pro series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for two LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC3HAP to...

The Chief TILSC2HIFH adds a finished edge to TiLED direct-view LED video walls built with Samsung IFH displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for two LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC1HIFH to match the height of...

The Chief TILSC2HPH adds a finished edge to TiLED direct-view LED video walls built with Philips 27BDL 9000 series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for two LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC3HPH to match the...

The Chief TILSC2HPT adds a finished edge to TiLED direct-view LED video walls built with LG LAS fine-pitch and Leyard TVF series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for two LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC3HPT...

The Chief TILSC2HUU adds a finished edge to TiLED direct-view LED video walls built with Unilumin UpanelS and Barco XT series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for two LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC3HUU to...

The Chief TILSC3HAP adds a finished edge to TiLED direct-view LED video walls built with Absen Acclaim Plus and Pro series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for three LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC2HAP to...

The Chief TILSC3HIFH adds a finished edge to TiLED direct-view LED video walls built with Samsung IFH and IER series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for three LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC1HIFH /...

The Chief TILSC3HPH adds a finished edge to TiLED direct-view LED video walls built with Philips 27BDL 9000 series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for three LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC2HPH to match the...

The Chief TILSC3HPT adds a finished edge to TiLED direct-view LED video walls built with LG LAS fine-pitch and Leyard TVF series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for three LED panel rows, and because the design is modular, covers can be stacked vertically with the...

The Chief TILSC3HUU adds a finished edge to TiLED direct-view LED video walls built with Unilumin UpanelS and Barco XT series displays. The sides of a bare LED cabinet stack expose frames, cabling and mounting hardware; these black side covers attach at the left and right ends of the wall to conceal them and give the installation a clean, architectural outline. Each cover is sized for three LED panel rows, and because the design is modular, covers can be stacked vertically with the TILSC2HUU...

The Chief TILVAB1 is a vertical connector kit for the TiLED direct-view LED wall mounting system. When a video wall is taller than a single run of mount sections, the TILVAB1 links the upper and lower sections together so they act as one aligned structure, keeping the LED cabinets in register from row to row. Each kit contains two connector brackets and the hardware needed to assemble them. Chief lists it for TiLED builds using Absen Acclaim Plus and Pro, Philips 27BDL 9000, Samsung IER, IFH...

The Chief TILVAB2 is an installation accessory for the TiLED direct-view LED mounting system. When a video wall needs more than one row of cabinets, this kit links one TiLED wall mount to the mount above it so the stacked rows act as a single, rigid structure. It is matched to LG LSCB Series Ultra Slim and Unilumin USLIM cabinets and is intended to connect select TiLED dvLED wall mounting systems (left, right and middle connections). The kit ships with two brackets plus assembly hardware, so...

The Chief TILVABPT is an installation accessory for the TiLED direct-view LED mounting system. When a video wall needs more than one row of cabinets, this kit links one TiLED wall mount to the mount above it so the stacked rows act as a single, rigid structure. It is matched to Leyard TVF and LG LAS cabinets and is intended to connect any combination of Chief TIL1X2PT, TIL1X3PT and TIL1X4PT dvLED wall mounts. The kit ships with two brackets plus assembly hardware, so the installer can tie the...

The Chief TILVABUU is an installation accessory for the TiLED direct-view LED mounting system. When a video wall needs more than one row of cabinets, this kit links one TiLED wall mount to the mount above it so the stacked rows act as a single, rigid structure. It is matched to Barco XT and Unilumin UpanelS cabinets and is intended to connect any combination of Chief TIL1X2UU, TIL1X3UU and TIL1X4UU dvLED wall mounts. The kit ships with two brackets, so the installer can tie the mount sections...

The Chief TPK1 is a pole clamp kit used to attach mounting hardware to round tubing. Each clamp is sized for a tube with an outside diameter of 1" - 2" (25.4 - 50.8mm), and the package contains 2 pieces. It belongs to Chief's large flat-panel accessory family, giving installers a straightforward way to fasten display mounting hardware to vertical or horizontal poles instead of a wall or ceiling structure. The black finish blends with typical staging, truss and pole hardware. Choose the kit...

The Chief TPK2 is a pole clamp kit used to attach mounting hardware to round tubing. Each clamp is sized for a tube with an outside diameter of 2" - 3" (50.8 - 76.2mm), and the package contains 2 pieces. It belongs to Chief's large flat-panel accessory family, giving installers a straightforward way to fasten display mounting hardware to vertical or horizontal poles instead of a wall or ceiling structure. The black finish blends with typical staging, truss and pole hardware. Choose the kit...

The Chief TPK3 is a truss clamp kit used to attach mounting hardware to round tubing. Each clamp is sized for a tube with an outside diameter of 0" - 1" (0 - 25.4mm), and the package contains 4 pieces. It belongs to Chief's large flat-panel accessory family, giving installers a straightforward way to fasten display mounting hardware to truss chords and rigging pipe instead of a wall or ceiling structure. The black finish blends with typical staging, truss and pole hardware. Choose the kit that...

The Chief TPK4 is a truss clamp kit used to attach mounting hardware to round tubing. Each clamp is sized for a tube with an outside diameter of 1" - 2" (25.4 - 50.8mm), and the package contains 4 pieces. It belongs to Chief's large flat-panel accessory family, giving installers a straightforward way to fasten display mounting hardware to truss chords and rigging pipe instead of a wall or ceiling structure. The black finish blends with typical staging, truss and pole hardware. Choose the kit...

The Chief TPK5 is a truss clamp kit used to attach mounting hardware to round tubing. Each clamp is sized for a tube with an outside diameter of 2" - 3" (50.8 - 76.2mm), and the package contains 4 pieces. It belongs to Chief's large flat-panel accessory family, giving installers a straightforward way to fasten display mounting hardware to truss chords and rigging pipe instead of a wall or ceiling structure. The black finish blends with typical staging, truss and pole hardware. Choose the kit...

The Chief TPM2000B is a large flat-panel pole mount from the TPM family, built to hang a display from a pole rather than a wall. It provides tilt so the screen can be angled down toward the audience, and supports displays up to 150 lbs (68 kg) in either landscape or portrait orientation. After the display is hung, post-installation roll adjustment lets the installer level the image without taking the screen down. This version ships without a display interface, letting you pair it with either a...

The Chief TPMUB is a large flat-panel pole mount from the TPM family, built to hang a display from a pole rather than a wall. It provides tilt so the screen can be angled down toward the audience, and supports displays up to 150 lbs (68 kg) in either landscape or portrait orientation. After the display is hung, post-installation roll adjustment lets the installer level the image without taking the screen down. This version includes a universal interface, so it is ready to accept a wide range...

The Chief TPP2000B is a large flat-panel truss mount from the TPP family, built to hang a display from truss rather than a wall. It provides tilt so the screen can be angled down toward the audience, and supports displays up to 150 lbs (68 kg) in either landscape or portrait orientation. After the display is hung, post-installation roll adjustment lets the installer level the image without taking the screen down. This version ships without a display interface, letting you pair it with either a...

The Chief TPPU is a large flat-panel truss mount from the TPP family, built to hang a display from truss rather than a wall. It provides tilt so the screen can be angled down toward the audience, and supports displays up to 150 lbs (68 kg) in either landscape or portrait orientation. After the display is hung, post-installation roll adjustment lets the installer level the image without taking the screen down. This version includes a universal interface, so it is ready to accept a wide range of...

The Chief TPS2000B is a large flat-panel truss/pole mount from the TPS family, built to hang a display from a pole or truss rather than a wall. It holds the screen in a fixed, close-to-structure position with a minimum depth of 1.08 in (2.7 cm), and supports displays up to 150 lbs (68 kg) in either landscape or portrait orientation. After the display is hung, post-installation roll adjustment lets the installer level the image without taking the screen down. This version ships without a...