Mounts & Racks

The Chief TA100 gives a Thinstall swing arm a place to carry the electronics that support the display. The shelf attaches to the faceplate of a large or medium Thinstall arm and sits above or below the screen, so a codec, small PC, DVR, cable box or disc player moves with the display instead of cluttering a credenza. Shelf position is adjustable from 10.5 in to 42 in measured from the center of the screen, which accommodates a wide range of display sizes. Because it mounts to the faceplate,...

The Chief TA200 is a 8 in wide shelf that mounts a video conferencing camera or other compact AV device directly to a Chief Thinstall swing arm. Placing the camera on the same arm as the display keeps it aligned with the screen, so participants look natural on camera wherever the arm is positioned. The shelf can be set above or below the display, from 10.5 in to 42 in measured from the screen's center, to suit different display sizes and room sightlines. It fastens to the arm's faceplate and...

The Chief TA210E is a dedicated mount for the Vaddio IntelliSHOT camera, designed to ride on a Chief Thinstall swing arm with a large display. It places the camera directly above or below the screen so the lens stays centered on the display as the arm is extended or repositioned, keeping eye contact natural during calls. The mount suits typical screens from 55 in to 85 in, with an equipment height range of 28 in to 47 in, and carries up to 10 lbs. It attaches at the arm faceplate, keeping the...

The Chief TA210K mounts a Vaddio ConferenceSHOT ePTZ camera to a Chief Thinstall swing arm, placing it directly above or below a large display. Keeping the camera on the same arm as the screen means the shot stays aligned no matter how the display is positioned, which produces a more natural view for far-end participants. The mount suits typical screens from 50 in to 100 in, with an equipment height range of 26 in to 50.5 in, and supports up to 5 lbs. It attaches at the arm faceplate and adds...

The Chief TA250 is a 12 in wide shelf that mounts a video conferencing camera or other compact AV device directly to a Chief Thinstall swing arm. Placing the camera on the same arm as the display keeps it aligned with the screen, so participants look natural on camera wherever the arm is positioned. The shelf can be set above or below the display, from 10.5 in to 42 in measured from the screen's center, to suit different display sizes and room sightlines. It fastens to the arm's faceplate and...

The Chief TA350 lets a center channel speaker or soundbar move with the display on a Chief Thinstall swing arm. The adapter attaches to the arm and positions the speaker directly above or below the screen, keeping dialogue anchored to the picture even when the display is pulled out or angled. Infinite adjustment accommodates most speaker and screen pairings, and the interface accepts speaker mounting patterns up to 16 in wide, with an equipment height range of 22 in to 34 in. The low-profile...

The Chief TA410 adapter allows a display to be turned to portrait on a large or medium Chief Thinstall swing arm. Screens with a 200 x 200 mm VESA pattern can already be hung in portrait without accessories, but displays with any other mounting pattern need the TA410 to make the rotation possible. The adapter is low profile, adding just 0.13 in to the depth of the installation, so the arm keeps its slim appearance against the wall. Portrait orientation is useful for digital signage,...

The Chief TA500 is a large in-wall enclosure that recesses a Thinstall swing arm into the wall cavity. With the arm housed inside the box, the display can sit nearly flush when retracted, turning an already slim swing arm into a virtually zero-depth installation. The enclosure does not interfere with the arm: the display still extends, swivels and keeps its height adjustment. The box measures 21.75 in high, 34 in wide and 3.96 in deep and is listed for typical screens from 30 in to 58 in....

The Chief TA500HWKIT1 is a hardware kit for the TA500 large Thinstall in-wall enclosure, the back box that recesses a TS525TU or TS325TU swing arm into the wall. This kit supplies the screws used to install the in-wall enclosure, making it useful when parts are lost on site, when an installation is being relocated, or when a project calls for spares. Chief divides the TA500 hardware into three kits so installers can order only the part of the assembly they need: TA500HWKIT1 covers installation...

The Chief TA500HWKIT2 is a hardware kit for the TA500 large Thinstall in-wall enclosure, the back box that recesses a TS525TU or TS325TU swing arm into the wall. This kit supplies the brackets and hardware that attach the swing arm to the enclosure, making it useful when parts are lost on site, when an installation is being relocated, or when a project calls for spares. Chief divides the TA500 hardware into three kits so installers can order only the part of the assembly they need: TA500HWKIT1...

The Chief TA500HWKIT3 is a hardware kit for the TA500 large Thinstall in-wall enclosure, the back box that recesses a TS525TU or TS325TU swing arm into the wall. This kit supplies the final installation hardware and finishing trim, making it useful when parts are lost on site, when an installation is being relocated, or when a project calls for spares. Chief divides the TA500 hardware into three kits so installers can order only the part of the assembly they need: TA500HWKIT1 covers...

The Chief TA501 is a medium in-wall enclosure built for the Thinstall TS318TU swing arm. Installed in the wall cavity, it houses the arm so the display can fold back almost flush with the wall surface, taking an already thin mount to a near-zero-depth profile. The box measures 20 in high, 30 in wide and 3.96 in deep, supports typical screens from 26 in to 52 in and is rated to 75 lbs. It suits corridors and patient rooms where protruding equipment is a concern, as well as offices and...

The Chief TA502 is a small in-wall enclosure for Thinstall TS218SU and TS118SU swing arms. Mounted inside the wall cavity, it houses the arm so the display folds back almost flush, giving a near-zero-depth result from an already thin mount. The box measures 17.2 in high, 14.25 in wide and 3.96 in deep, supports typical screens from 35 in to 47 in and is rated to 75 lbs. With trim installed the box is 18.85 in tall, so confirm the display's height exceeds 18.85 in if you want the screen to...

The Chief TAB1 lets integrators house a Crestron Flex unified communications kit inside the wall behind a swing-arm-mounted display. Paired with a Chief TS525TU Thinstall swing arm and a TA500 large in-wall box, the bracket holds the Flex components in the recessed cavity so the finished room shows only the display, with no equipment shelf or visible cabling. Even though it is concealed, the equipment stays reachable for service by swinging out the display. The fixed bracket supports up to 25...

The Chief TAMMSB adapts a medium Thinstall swing arm for installation on metal stud walls, common in commercial and healthcare construction. It is intended for the TS318 arms and provides the attachment interface needed when wood studs or solid backing are not available. When mounted with this accessory, the total applied load, including the weight of the mount itself, must not exceed 50 lbs, so check the display and swing arm weights together before specifying it. Using the correct stud...

The Chief TAMMSW adapts a medium Thinstall swing arm for installation on metal stud walls, common in commercial and healthcare construction. It is intended for the TS318 arms and provides the attachment interface needed when wood studs or solid backing are not available. When mounted with this accessory, the total applied load, including the weight of the mount itself, must not exceed 50 lbs, so check the display and swing arm weights together before specifying it. Using the correct stud...

The Chief TAS1 spacer kit adds one inch of depth to a Thinstall in-wall installation, opening up room for equipment inside the wall. Installed with a TA500 or TA501 in-wall box, it brings the available component space to 1.75 in, equal to one rack unit, which is enough for many media players, extenders and small control devices. It pairs with Chief's CSPBPTA component storage panel to keep that equipment organized behind the display. It is a simple way to hide gear without adding a separate...

The Chief TASMSB adapts a small Thinstall swing arm for installation on metal stud walls, common in commercial and healthcare construction. It is intended for the TS110/TS118/TS218 arms and provides the attachment interface needed when wood studs or solid backing are not available. When mounted with this accessory, the total applied load, including the weight of the mount itself, must not exceed 50 lbs, so check the display and swing arm weights together before specifying it. Using the correct...

The Chief TASMSW adapts a small Thinstall swing arm for installation on metal stud walls, common in commercial and healthcare construction. It is intended for the TS110/TS118/TS218 arms and provides the attachment interface needed when wood studs or solid backing are not available. When mounted with this accessory, the total applied load, including the weight of the mount itself, must not exceed 50 lbs, so check the display and swing arm weights together before specifying it. Using the correct...

The Chief TIL1X1IFH is a TiLED direct-view LED (dvLED) wall mount built specifically for the Samsung IFH Series. It is a single vertical column that carries one LED cabinet, and it serves as a building block: place columns side by side, or combine them with other TiLED mounts for the same display line, to assemble a video wall of the size you need. The frame is fixed to the wall and then fine-tuned with lateral and height micro-adjustments so each cabinet lines up with its neighbors for a...

The Chief TIL1X2AP is a TiLED direct-view LED (dvLED) wall mount built specifically for the Absen Acclaim Plus & Acclaim Pro Series. It is a single vertical column that carries two vertically stacked LED cabinets, and it serves as a building block: place columns side by side, or combine them with other TiLED mounts for the same display line, to assemble a video wall of the size you need. Keyhole slots speed hanging, and offset mounting slots let cabinets slide into place without rubbing...

The Chief TIL1X2IFH is a TiLED direct-view LED (dvLED) wall mount built specifically for the Samsung IFH Series. It is a single vertical column that carries two vertically stacked LED cabinets, and it serves as a building block: place columns side by side, or combine them with other TiLED mounts for the same display line, to assemble a video wall of the size you need. The frame is fixed to the wall and then fine-tuned with lateral and height micro-adjustments so each cabinet lines up with its...

The Chief TIL1X2IFJ is a TiLED direct-view LED (dvLED) wall mount built specifically for the Samsung IFJ Series. It is a single vertical column that carries two vertically stacked LED cabinets, and it serves as a building block: place columns side by side, or combine them with other TiLED mounts for the same display line, to assemble a video wall of the size you need. The frame is fixed to the wall and then fine-tuned with lateral and height micro-adjustments so each cabinet lines up with its...

The Chief TIL1X2PH is a TiLED direct-view LED (dvLED) wall mount built specifically for the Philips 27BDL 9000 Series. It is a single vertical column that carries two vertically stacked LED cabinets, and it serves as a building block: place columns side by side, or combine them with other TiLED mounts for the same display line, to assemble a video wall of the size you need. Keyhole slots speed hanging, and offset mounting slots let cabinets slide into place without rubbing their edges. Fine...