Mounts & Racks

The Chief PWRUB is the universal version of Chief's PWR single-arm swing arm mount for large flat panels. It is built for 32 to 65 in screens weighing up to 125 lbs (56.7 kg) and covers VESA patterns from 200 x 200 mm to 862 x 517 mm. The arm extends the display away from the wall, swivels it toward viewers, tilts from +5 to -15 deg and offers lateral shift for precise placement. Post-installation leveling roll lets you correct the screen angle after hanging. Collapsed, the mount sits 3.38 in...

The Chief Fit RFCUB is a mobile cart built for interactive touchscreen displays from 55 to 86 in and up to 175 lbs (79 kg). Its slim, low-profile base stays stable while people write and tap on the screen, yet the compact 29 in legs and 4 in casters make it easy to roll between rooms and through standard doorways. The display can be set at three heights, 44, 52 or 60 in (112, 132 or 153 cm), to suit standing presenters, seated users or accessibility needs. A height-adjustable shelf holds up to...

The Chief Fit RLC1 is a large single-display ceiling mount for suspending a 42-75 in screen where wall space is limited or sightlines demand an overhead position. It supports displays up to 125 lbs (56.7 kg) with VESA patterns up to 610 x 400 mm. Tilt adjustment from +5 to -20 deg angles the screen down toward viewers, and 3 deg of roll adjustment helps level the image after installation. The mount supports landscape orientation and is finished in black. It is UL Listed for safety; note that...

The Chief Fit RLF3 is a large fixed wall mount for 43-86 in displays weighing up to 200 lbs (90.7 kg), with support for VESA patterns from 100 x 100mm - 960 x 450mm. Its 1 in (25 mm) low-profile depth supports ADA-compliant designs, and the rigid wall plate is rated to 200 lbs (90.7 kg). A post-installation leveling screw gives 0.75 in (19 mm) of adjustment, and a 10 in ball-end hex key is included to reach it. The open wall plate positions easily around power and data boxes and includes extra...

The Chief Fit RLT3 is a large tilt wall mount for 43-86 in displays weighing up to 200 lbs (90.7 kg), with support for VESA patterns from 100 x 100mm - 915 x 450mm. A 2 in (51 mm) low-profile depth supports ADA-compliant designs, and the screen tilts up to 12 deg to cut glare and improve viewing angles. A post-installation leveling screw gives 0.75 in (19 mm) of adjustment, and a 10 in ball-end hex key is included to reach it. The open wall plate positions easily around power and data boxes...

The Chief Fit RLXT3 is a large extending tilt wall mount for 43-85 in displays weighing up to 150 lbs (68 kg), with support for VESA patterns from 100 x 100mm - 863 x 450mm. The mount sits 2.67 in (68 mm) from the wall collapsed and extends to 6 in (152 mm), letting the screen tilt 10 deg forward or back for the best viewing angle on large displays. A post-installation leveling screw gives 0.75 in (19 mm) of adjustment, and a 10 in ball-end hex key is included to reach it. The open wall plate...

The Chief Fit RMB400 is a tilting display interface for building multi-screen menu boards on standard strut channel. Each interface hangs on 12 or 14 gauge 1-5/8 in strut (purchased separately), so you can run as many displays side by side as the channel length allows, with lateral positioning set by the strut itself. It handles 32 to 65 in displays up to 75 lbs (34 kg), with VESA patterns of any width up to 400 mm tall. The tilt locks at 0, 5, 10 or 15 deg to angle screens toward customers,...

The Chief Fit RMC1 is a medium single-display ceiling mount for suspending a 32-55 in screen where wall space is limited or sightlines demand an overhead position. It supports displays up to 125 lbs (56.7 kg) with VESA patterns up to 457 x 400 mm. Tilt adjustment from +5 to -20 deg angles the screen down toward viewers, and 3 deg of roll adjustment helps level the image after installation. The mount supports landscape or portrait orientation and is finished in black. It is UL Listed for...

The Chief Fit RMF3 is a medium fixed wall mount for 32-65 in displays weighing up to 125 lbs (56.7 kg), with support for VESA patterns from 100 x 100mm - 550 x 450mm. Its 1 in (25 mm) low-profile depth supports ADA-compliant designs, and the rigid wall plate is rated to 125 lbs (56.7 kg). A post-installation leveling screw gives 0.75 in (19 mm) of adjustment, and a 10 in ball-end hex key is included to reach it. The open wall plate positions easily around power and data boxes and includes...

The Chief Fit RMT3 is a medium tilt wall mount for 32-65 in displays weighing up to 125 lbs (56.7 kg), with support for VESA patterns from 100 x 100mm - 508 x 450mm. A 2 in (51 mm) low-profile depth supports ADA-compliant designs, and the screen tilts up to 12 deg to cut glare and improve viewing angles. A post-installation leveling screw gives 0.75 in (19 mm) of adjustment, and a 10 in ball-end hex key is included to reach it. The open wall plate positions easily around power and data boxes...

The Chief RPA000 is the top assembly of Chief's RPA projector mount, supplied without the interface bracket that attaches to the projector. That makes it the right choice when you are pairing it with a universal SLBU bracket, a specific custom SLB bracket, or replacing a top on an existing installation. Independent roll, pitch and yaw adjustments let you register the image quickly and precisely. The quick connect/disconnect design gives easy lamp and filter access on most projectors and holds...

The Chief RPA000W is the top assembly of Chief's RPA projector mount, supplied without the interface bracket that attaches to the projector. That makes it the right choice when you are pairing it with a universal SLBUW bracket, a specific custom SLB bracket, or replacing a top on an existing installation. Independent roll, pitch and yaw adjustments let you register the image quickly and precisely. The quick connect/disconnect design gives easy lamp and filter access on most projectors and...

The Chief RPA020 is a complete custom RPA projector mount: the RPA top assembly paired with a SLB020 custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled....

The Chief RPA201 is a complete custom RPA projector mount: the RPA top assembly paired with a custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled. Chief's...

The Chief RPA203 is a complete custom RPA projector mount: the RPA top assembly paired with a custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled. Chief's...

The Chief RPA221 is a complete custom RPA projector mount: the RPA top assembly paired with a custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled. Chief's...

The Chief RPA266 is a complete custom RPA projector mount: the RPA top assembly paired with a SLB266 custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled....

The Chief RPA281 is a complete custom RPA projector mount: the RPA top assembly paired with a SLB281 custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled....

The Chief RPA284 is a complete custom RPA projector mount: the RPA top assembly paired with a SLB284 custom interface bracket made to fit a specific projector model, so installation is quick and the projector sits exactly where it should. Independent roll, pitch and yaw adjustments make image registration fast and precise. The quick connect/disconnect feature provides convenient lamp and filter access on most projectors and keeps your adjustments when the projector is removed and reinstalled....

The Chief RPA285 is a member of Chief's RPA custom projector mount family, the long-running workhorse of commercial and residential ceiling installs. Instead of a one-size-fits-all adapter, it ships with the SLB285 custom interface bracket, which bolts directly to the matching projector so the installer skips the trial-and-error of universal arms. The mount head offers independent roll, pitch and yaw, so each axis can be dialed in without disturbing the others. A quick-release connection...

The Chief RPA298 is a member of Chief's RPA custom projector mount family, the long-running workhorse of commercial and residential ceiling installs. Instead of a one-size-fits-all adapter, it ships with the SLB298 custom interface bracket, which bolts directly to the matching projector so the installer skips the trial-and-error of universal arms. The mount head offers independent roll, pitch and yaw, so each axis can be dialed in without disturbing the others. A quick-release connection...

The Chief RPA302 is a member of Chief's RPA custom projector mount family, the long-running workhorse of commercial and residential ceiling installs. Instead of a one-size-fits-all adapter, it ships with the SLB302 custom interface bracket, which bolts directly to the matching projector so the installer skips the trial-and-error of universal arms. The mount head offers independent roll, pitch and yaw with up to 12° of adjustment on flush-mount installs, so each axis can be dialed in...

The Chief RPA304 is a member of Chief's RPA custom projector mount family, the long-running workhorse of commercial and residential ceiling installs. Instead of a one-size-fits-all adapter, it ships with the SLB304 custom interface bracket, which bolts directly to the matching projector so the installer skips the trial-and-error of universal arms. The mount head offers independent roll, pitch and yaw with up to 12° of adjustment on flush-mount installs, so each axis can be dialed in...

The Chief RPA313 is a member of Chief's RPA custom projector mount family, the long-running workhorse of commercial and residential ceiling installs. Instead of a one-size-fits-all adapter, it ships with a custom (SLB-series) interface bracket, which bolts directly to the matching projector so the installer skips the trial-and-error of universal arms. The mount head offers independent roll, pitch and yaw with up to 12° of adjustment on flush-mount installs, so each axis can be dialed in...