Crestron

Crestron FT2A-CHGR-USBA-BASIC FlipTop USB-A Charging Module The FT2A-CHGR-USBA-BASIC is a basic USB-A power charging module for Crestron FT2A series FlipTop tabletop interface boxes. It delivers 5V USB power at the table, giving meeting participants a convenient point to charge phones, tablets, and other USB-powered devices during a session. Dedicated to charging rather than data, the module offers a simple, reliable power source that integrates directly into the FlipTop assembly. It seats...

Crestron FT2A-CP-RJ45 FlipTop RJ45 Cable Pass-Through Module The FT2A-CP-RJ45 is a cable pass-through module fitted with an RJ45 jack, designed for Crestron FT2A series FlipTop tabletop interface boxes. It brings a wired Ethernet connection directly to the table, allowing a laptop or device to plug into the network from the FlipTop rather than reaching for a wall or floor port. The module presents a keystone-style RJ45 termination at the tabletop and passes the connection through to structured...

Crestron FT2A-PLT-BLANK-10 FlipTop Blank Filler Plate, 10-Pack The FT2A-PLT-BLANK-10 is a ten-pack of blank filler plates for Crestron FT2A series FlipTop tabletop interface boxes. The plates cover unused module positions within the assembly, giving the tabletop a finished, uniform appearance where no connectivity or power module is installed. Supplied in quantity, these fillers are convenient for outfitting multiple FlipTop boxes or maintaining a stock of spares across a facility. Each plate...

Crestron FT2A-PWR-US-3 FlipTop US Power Module, 3-Outlet The FT2A-PWR-US-3 is a US-style AC power module providing three outlets for Crestron FT2A series FlipTop tabletop interface boxes. It brings mains power directly to the conference or presentation table, giving participants a convenient place to power laptops, chargers, and other devices during a meeting. Integrated into the FlipTop assembly, the module keeps the outlets concealed within the tabletop and accessible when the lid is opened,...

Crestron GLPP-1DIMFLV2CN-PM GreenLight 1-Channel Low-Voltage Dimmer Module The GLPP-1DIMFLV2CN-PM is a single-channel forward-phase dimmer from the Crestron GreenLight Permanent Power family, designed to control low-voltage lighting loads. It uses forward-phase dimming suited to magnetic low-voltage fixtures and integrates over a two-wire Cresnet connection for network control within a Crestron lighting system. The panel-mount format allows installation inside an enclosure or lighting load...

Crestron GLPP-1DIMFLV3CN-PMLighting Dimmer ModuleThe GLPP-1DIMFLV3CN-PM is a single-channel forward-phase dimming module from the Crestron GreenLight Permanent Power family, engineered for smooth, flicker-free control of low-voltage lighting loads. It ships in a panel-mount form factor intended for installation inside a lighting cabinet or enclosure, where it joins a distributed control ecosystem and takes direction from Crestron processors and keypads.Wiring follows a 3-wire scheme, and the...

Crestron GLPP-DIMFLVCN-PMLighting Dimmer ModuleThe GLPP-DIMFLVCN-PM is a multi-channel forward-phase low-voltage dimming module within the Crestron GreenLight Permanent Power range. Built for in-cabinet mounting, it handles electronic and magnetic low-voltage (ELV/MLV) lighting loads and provides the smooth, quiet dimming performance expected of architectural installations across homes, conference rooms, and hospitality environments.The module ties into a Crestron system over Cresnet, which...

Crestron GLPPA-KP-W-SLighting KeypadThe GLPPA-KP-W-S is an architectural wall-mount keypad from the Crestron GreenLight Permanent Power lighting line, finished in smooth white to blend cleanly with modern interiors. Its buttons can be engraved with custom labels, giving occupants clear, intuitive access to lighting scenes, room presets, and other automation functions from a single wall location.The keypad connects over Cresnet, drawing power and exchanging control data with the system on one...

Crestron GLPPA-KP2-W-SLighting KeypadThe GLPPA-KP2-W-S is a two-button architectural keypad in the Crestron GreenLight Permanent Power family, presented in a smooth white finish suited to residential and commercial spaces alike. Its pair of engravable buttons offers a streamlined interface for users who need direct, uncluttered access to a small set of lighting scenes or automation commands.Wall-mounted and powered over Cresnet, the keypad communicates with Crestron processors on the same...

Crestron GLPPA-KP4-W-SLighting KeypadThe GLPPA-KP4-W-S is a four-button architectural keypad from the Crestron GreenLight Permanent Power lineup, finished in smooth white for a discreet appearance on any wall. The four engravable buttons give users a versatile control surface for selecting among multiple lighting scenes, room presets, and automation commands without navigating a screen.The keypad mounts to a standard wall location and operates over Cresnet, receiving power and exchanging data...

Crestron GLS-ODT-C-CNOccupancy SensorThe GLS-ODT-C-CN is a ceiling-mounted dual-technology occupancy sensor in the Crestron GreenLight family, combining passive infrared (PIR) and ultrasonic detection to reliably sense presence in a room. Using both technologies together improves accuracy by requiring corroborating signals to confirm occupancy, reducing false triggers and missed detections in spaces with partitions or limited motion.The sensor connects and draws power over Cresnet, reporting...

Crestron GLS-ODT-C-NSOccupancy SensorThe GLS-ODT-C-NS is a ceiling-mounted dual-technology occupancy sensor from the Crestron GreenLight line, pairing passive infrared and ultrasonic detection for dependable presence sensing. As a network stand-alone (NS) model, it operates independently with a local relay output, switching connected lighting directly without requiring a central control processor.This self-contained design makes it well suited to single rooms, closets, restrooms, and other...