Crestron

Crestron DM-NVX-E30AV-over-IP Network AV EncoderThe DM-NVX-E30 is a transmit-only endpoint that encodes a 4K60 4:4:4 source with HDR onto a standard IP network for distribution to DM NVX decoders. It accepts a single HDMI input, provides an analog stereo audio output, and connects through a single 1GbE RJ45 port that supports PoE+ powering directly from a compatible switch.Built as a compact, economical encoder, it adds a source location to any DM NVX network with minimal hardware. HDCP 2.2...

Crestron DM-PSU-ULTRA-MIDSPANPoDM Power InjectorThe DM-PSU-ULTRA-MIDSPAN is a single-port, high-power PoDM++ midspan injector that delivers Power over DigitalMedia to DM 8G+ endpoints over standard CAT cabling. Inserted inline between a network run and a DM device, it powers transmitters and receivers remotely, eliminating the need for a local power supply at each endpoint location.Its DigitalMedia Ultra power rating targets endpoints with higher current demands than standard PoDM can supply,...

Crestron DM-RMC-4K-100-CAV Receiver / Room ControllerThe DM-RMC-4K-100-C is a 4K DigitalMedia 8G+ receiver and room controller that terminates a DM signal at the display. A single DM 8G+ input on RJ45 accepts the incoming stream over CAT5e or CAT6 cabling and is also HDBaseT-compatible, while an HDMI output with HDCP and DVI compatibility feeds the connected screen or projector with resolutions up to 4K UHD.Beyond video, it acts as a control hub at the display end, providing IR, RS-232, and...

Crestron DM-RMC-4K-SCALER-CAV Receiver / Room ControllerThe DM-RMC-4K-SCALER-C is a 4K DigitalMedia 8G+ receiver and room controller that adds a built-in HDMI scaler at the display end. A single DM 8G+ input accepts the incoming signal over CAT cabling, and the HDMI output scales that signal to match the connected display's native resolution, helping ensure a clean, correctly formatted image on any screen.Like the standard 4K receiver, it offers IR, RS-232, and Ethernet ports for local device...

Crestron DM-RMC-4KZ-100-CAV Receiver / Room ControllerThe DM-RMC-4KZ-100-C is a DigitalMedia 8G+ receiver and room controller engineered for 4K60 4:4:4 video with HDR. A single DM 8G+ input accepts the signal over CAT5e or CAT6 cabling and is HDBaseT-compatible, while the HDMI output delivers full 4K60 4:4:4 with HDR10 and HDCP 2.2 to the connected display.Designed as a drop-in upgrade for the DM-RMC-4K-100-C, it fits existing DM 8G+ infrastructure while raising resolution and color...

Crestron DM-TX-200-C-2G-B-TAV TransmitterThe DM-TX-200-C-2G-B-T is a 2-gang wall-plate DigitalMedia transmitter in a black textured finish that brings two source inputs to a single wall location. It accepts one HDMI and one VGA input, each with its own analog audio, and combines the selected source onto a single DM 8G+ output carried over CAT cabling to a downstream DM receiver or switcher.Built-in auto-switching moves between the HDMI and VGA inputs based on active signal, streamlining use in...

Crestron DM-TX-200-C-2G-W-TAV TransmitterThe DM-TX-200-C-2G-W-T is a 2-gang wall-plate DigitalMedia transmitter finished in white textured, matching common wall aesthetics while providing two-source connectivity at the point of use. One HDMI and one VGA input, each with analog audio, feed a single DM 8G+ output that travels over CAT cabling to a downstream DM receiver or switcher.Automatic HDMI/VGA switching selects the active source without manual intervention, and RS-232 and IR ports support...

Crestron DM-TX-201-CAV TransmitterThe DM-TX-201-C is a surface-mount, two-input DigitalMedia transmitter that consolidates HDMI and VGA sources onto a single DM 8G+ link. It accepts one HDMI and one VGA input, each with analog audio, and outputs a DM 8G+ signal over CAT cabling that is HDBaseT-compatible for connection to a downstream receiver or DM switcher.Integrated auto-switching selects between the HDMI and VGA inputs automatically as sources become active, simplifying operation in...

Crestron DM-TX-4K-100-C-1G-B-TAV TransmitterThe DM-TX-4K-100-C-1G-B-T is a 1-gang wall-plate 4K DigitalMedia transmitter in a black textured finish, providing a single-source connection point at the wall. It accepts one HDMI input, compatible with DVI and DisplayPort sources, and sends the signal on a DM 8G+ output over CAT cabling that is also HDBaseT-compatible for delivery to a downstream receiver or switcher.The transmitter supports resolutions up to 4K UHD and passes CEC alongside RS-232...

Crestron DM-TX-4K-100-C-1G-W-TAV TransmitterThe DM-TX-4K-100-C-1G-W-T is a 1-gang wall-plate 4K DigitalMedia transmitter finished in white textured, offering the same single-source functionality as the black version in a lighter finish. A single HDMI input accepts the source and drives a DM 8G+ output over CAT cabling to a downstream DM receiver or switcher.The transmitter passes resolutions up to 4K UHD and supports CEC along with RS-232 and IR for connected-device control. Powered over the...

Crestron DM-TX-4K-202-C 4K DigitalMedia 8G+ Transmitter The DM-TX-4K-202-C is a surface-mount wallplate transmitter that carries two switchable HDMI sources over a single shielded twisted-pair cable to any compatible DigitalMedia input. Each of the two HDMI ports accepts DVI and DisplayPort Multimode signals and includes automatic source switching, so a connected display or projector shows whichever input becomes active without manual intervention. Signals travel across the DM 8G+ output using...

Crestron DM-TX-4KZ-202-C 4K60 4:4:4 HDR DM 8G+ Transmitter The DM-TX-4KZ-202-C transmits two selectable HDMI sources to a compatible DigitalMedia input across a single CATx run. Built on Crestron's DM 4KZ platform, it applies visually lossless display stream compression to move full-bandwidth video without sacrificing image fidelity, delivering 4K60 with 4:4:4 color depth and high dynamic range content. Both HDMI ports accept DVI and DisplayPort Multimode signals and switch automatically...