DigitalMedia™ Ultra Midspan PoDM++ Injector

Enables powering of one or two PoDM-powered DM 8G+ devices. Supports PoDM+ and PoDM++ powered devices. Installs in line or connects via a DM switcher I/O card.

Get Custom Programming from 4TEC

Price: $690.00
    Availability: In Stock
    Usually ships In 24 - 48 hours



    The Crestron DM-PSU-ULTRA-MIDSPAN provides a single-point, midspan power injector for one or two PoDM-powered DM 8G+ devices. Its ability to deliver power in two directions without impacting the video or data signals passing through is unique in the industry. Its high-output power capacity of 45 Watts per port enables support for PoDM+ and PoDM++ powered devices including the Crestron TS-1542-C touch screen.[1]

    Bidirectional Power
    The DM-PSU-ULTRA-MIDSPAN installs in line between two DM 8G+ devices and provides power to either or both of those devices. This allows a DM 8G+ transmitter and receiver, such as theDM-TX-4K-302-C and DM-RMC-4K-SCALER-C-DSP, to be paired together to form a custom point-to-point 4K signal extender, all powered from a single midspan power source. The use of a midspan power source with bidirectional powering capability eliminates the need for separate power supplies or electrical outlets at either endpoint.

    2-Port PoDM++ Power Supply
    For larger systems utilizing a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher, the DM-PSU-ULTRA-MIDSPAN can be used to supply PoDM++ power to two DM 8G+ devices via their connections to the switcher. Instead of installing in line, each port on the DM-PSU-ULTRA-MIDSPAN can be connected to the POE IN port of a DMC-4K-C input card, DMC-4K-C-DSP input card, or DMC-4K-CO-HD output card. Doing so enables the powering of two separate devices, whether transmitters, receivers, or touch screens, through the DM port on each card. A maximum of 45 Watts is available at each port.[1]

    HDBaseT Compatible
    The DM-PSU-ULTRA-MIDSPAN is compatible with HDBaseT Alliance specifications and may be used to supply power to IEEE 802.3at compliant HDBaseT PoE++ powered devices.

    Mounting Options
    The DM-PSU-ULTRA-MIDSPAN features integral mounting flanges to allow for surface mounting to a wall or under a table, or attachment to a single rack rail. One or two units may also be installed in a single rack space using the optional rack mount kit (model ST-RMK, sold separately).

    Key Features
    • Powers one or two PoDM-powered DM 8G+® devices [2]
    • Supports PoDM+ and PoDM++ powered devices
    • Simultaneously supplies up to 45 Watts from each port [1]
    • Inserts midspan and supplies power to both endpoints
    • Preserves the integrity of 4K video and 10 GB data signals
    • Maintains full 300 ft (100 m) cable length end-to-end
    • Also functions as a 2-port PoDM++ power supply for DMC I/O cards
    • Compatible with HDBaseT® PoE+ powered devices
    • Includes status indicators for basic troubleshooting
    • No configuration or programming required
    • Surface or under-table mountable
    • Attachable to a single rack rail
    • 1 RU rack mount kit option sold separately


    G(1) 6-32 screw;
    Chassis ground lug
    100-240V~ 50/60Hz 1.2-0.6A(1) IEC 60320 C14 main power inlet;
    Mates with removable power cord, included
    PoDM++ 1 – 2(2) 8-pin RJ45 female, shielded;
    DM 8G+ pass-through ports (HDBaseT compatible);
    PoDM++ PSE ports (HDBaseT PoE+ compatible) [2]
    PWR(1 bottom/front, 1 top/rear) Green LEDs, each indicates main AC line power is connected and the unit is operating
    PoDM++ 1 – 2 (bottom/front)(2) Green LEDs, each indicates the corresponding port is delivering power to the connected device
    PORT PWR 1 – 2 (top/rear)(2) Green LEDs, each indicates the corresponding port is delivering power to the connected device
    Main Power1.2 Amp @ 100-125 Volts AC or 0.6 Amp @ 220-240 Volts AC, 50/60 Hz
    Power Consumption0.7 Watts at idle
    Power over DM (PoDM)IEEE 802.3at compliant PoDM++ PSE (Power Sourcing Equipment); each port supplies up to 45 Watts to power one PoDM (Class 0-3), PoDM+ (Class 4), or PoDM++ PD (Powered Device) [1]
    Power over HDBaseTIEEE 802.3at PoE+ compliant PSE (Power Sourcing Equipment); each port supplies up to 30 Watts to power one HDBaseT PoE or PoE+ PD (Powered Device) [3]
    Temperature32° to 104° F (0° to 40° C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation41 BTU/hr maximum;
    8.2 BTU/hr typical;
    2.4 BTU/hr idle
    ChassisMetal, black finish, (2) integral mounting flanges, vented sides
    MountingFreestanding, surface mount, attach to a single rack rail, or 1 RU rack mount (ST-RMK rack mount kit sold separately)
    Height6.06 in (154 mm)
    Width6.95 in (177 mm)
    Depth1.64 in (42 mm)
    2.6 lb (1.2 kg)