Audio & Video

Yoke mount for the AP-5102. Available in black

The QSC AP-YM10-WH is a U-shaped yoke mounting bracket for the AcousticPerformance AP-5102 10-inch loudspeaker, finished in white. It bolts to the cabinet's M10 side inserts so the speaker can be surface-mounted on a wall or ceiling and then aimed and locked at the required tilt and pan angle. This is a mounting accessory only; the loudspeaker is not included.Key FeaturesYoke mount bracket for the QSC AP-5102 loudspeakerAllows tilt and pan aiming after installationAttaches to the cabinet's...

Yoke mount for the AP-5122. Available in black

The QSC AP-YM12-WH is a U-shaped yoke mounting bracket for the larger AcousticPerformance loudspeakers, the AP-5122 (12-inch) and AP-5152 (15-inch), finished in white. It bolts to the cabinet's M10 side inserts so the speaker can be surface-mounted on a wall or ceiling and then aimed and locked at the desired tilt and pan angle. This is a mounting accessory only and does not include a loudspeaker.Key FeaturesYoke mount bracket for QSC AP-5122 and AP-5152Allows tilt and pan aiming after...

The QSC AP-YM12m-BK is a U-shaped yoke mounting bracket for the multi-angle AcousticPerformance loudspeakers, the AP-4122m coaxial and AP-5122m models, finished in black. It bolts to the cabinet's M10 side inserts so the speaker can be surface-mounted on a wall or ceiling and aimed and locked at the required tilt and pan angle. This is a mounting accessory only; the loudspeaker is not included.Key FeaturesYoke mount bracket for QSC AP-4122m and AP-5122mAllows tilt and pan aiming after...

Single gang US, IP Wall Controller, PoE (includes white and black faceplates)

The QSC CAES4 is a four-channel AES3 (AES/EBU) digital audio input/output card for Q-SYS Core processors and I/O Frames. It adds four channels of digital input and four channels of digital output in the professional AES3 format, letting integrators connect digital mixers, playback devices, and other AES/EBU equipment directly into a Q-SYS system without conversion to analog. The card maintains flat frequency response and low latency, preserving digital signal integrity throughout the Q-SYS...

The QSC CAN32 is an AVB (Audio Video Bridging, IEEE 1722.1) network bridge card for Q-SYS systems. It provides a digital bridge between a 100 Mb AVB-compliant edge network and the Q-SYS ecosystem, letting AVB audio streams move in and out of Q-SYS for processing and routing. The card handles up to 32 total channels at 48 kHz, configurable as 32x0, 0x32, or 16x16 (and smaller combinations such as 2x2, 4x4, and 8x8), and includes sample-rate converters on inputs and outputs. It uses two RJ45...

The QSC CASTER KIT-L is a set of 4-inch caster wheels for QSC E Series subwoofers, specifically the E118sw and E218sw. Instead of carrying a large ported sub, crews bolt on this kit and roll the cabinet into place, saving time and effort during load-in and teardown. It is a transport accessory supplied as a four-pack of casters, not a subwoofer or any powered component.Key FeaturesFour-pack of 4-inch caster wheelsDesigned for the QSC E118sw and E218sw subwoofersRoll heavy subs into position...

The QSC Caster Kit-S is a factory accessory that adds rolling mobility to compatible QSC subwoofers, including KS Series and KLA181 cabinets. It is a set of four heavy-duty casters that bolt to the recessed mounting points on the bottom of the enclosure, letting a single operator move a heavy sub without lifting. This is an accessory only and does not include a loudspeaker.Key FeaturesSet of four rugged 3-inch (76 mm) caster wheelsBolts directly to the pre-drilled mounting pattern on...

The QSC CDN64 is a Dante audio bridge card for Q-SYS systems, connecting Dante networked audio to the Q-SYS ecosystem. It lets integrators bring Dante-enabled sources such as wireless microphone receivers, digital mixers, and playback devices into Q-SYS for processing, and route Q-SYS audio back out onto a Dante network. The card supports up to 64x64 channels at 44.1/48 kHz, with 32x32 at 88.2/96 kHz and 16x16 at 176.4/192 kHz, and performs sample-rate conversion between Dante and other...

The QSC CIAES16 is a 16-channel AES3 (AES/EBU) digital input card for Q-SYS systems. It is a high-density input component that brings up to sixteen channels of 24-bit AES3 digital audio into a Q-SYS Core, using two RJ45 connectors for the digital streams. This makes it well suited to installations that pull large numbers of digital channels from mixing consoles or other AES/EBU sources into Q-SYS for processing and routing. The CIAES16 is Type 2 Q-SYS hardware and is an input-only card; it is...

The QSC CIML4 is a four-channel Mic/Line analog input card for Q-SYS Core processors and I/O Frames. It is a component that adds four balanced analog inputs to a Q-SYS system, each with software-selectable gain and switchable 48V phantom power for condenser microphones. Intended for installed AV and conferencing systems, it lets integrators bring microphones and line-level sources into the Q-SYS network for processing and routing. The CIML4 offers greater than 105 dB unweighted dynamic range...

The QSC CIML4-HP is the high-performance version of QSC's four-channel Mic/Line analog input card for Q-SYS Core processors and I/O Frames. Like the standard card it adds four balanced analog inputs with software-selectable gain and switchable 48V phantom power, but it uses higher-grade preamplifiers for improved audio performance. It delivers greater than 112 dB unweighted dynamic range and very low distortion (under 0.004% THD+N nominal), making it ideal for critical microphone capture,...

Contractor power amplifier/ 2 channel, 1100 watts/ch at 8Ω, 2000 watts/ch at 4Ω, 70V/mono at 1000 Watts

Contractor power amplifier/ 2 channel, 200 watts/ch at 8Ω, 300 watts/ch at 4Ω, 70V/mono at 600 Watts

Contractor power amplifier/ 2 channel, 300 watts/ch at 8Ω, 500 watts/ch at 4Ω, 70V/mono at 1200 Watts

Contractor power amplifier/ 2 channel, 500 watts/ch at 8Ω, 800 watts/ch at 4Ω, 70V/mono at 2000 Watts

The QSC CODP4 is a DataPort output card for Q-SYS systems, providing a direct digital audio and control link to compatible QSC amplifiers. It carries four channels of audio over two HD15 DataPort connectors and supports the v1 DataPort specification, allowing Q-SYS to interface with QSC CX, DCA, PowerLight, PL2, and PL3 amplifier series. Beyond audio, the card enables amplifier standby and muting to be controlled from within Q-SYS Designer software, and supports amplifier monitoring in...

The QSC COL4 is a four-channel analog line output card for Q-SYS Core processors and I/O Frames. It adds four balanced line-level analog outputs to a Q-SYS system, allowing processed audio to be sent to amplifiers, powered loudspeakers, assistive-listening feeds, recorders, or other line-level destinations. Output trim is software-adjustable within Q-SYS Designer, and the card provides greater than 112 dB dynamic range with very low distortion for clean, high-quality output. As a Q-SYS...

The QSC Core 8 Flex is a compact Q-SYS processor that brings audio, video and control together on one network-based platform for meeting rooms, classrooms and small-to-mid installs. It handles 64x64 networked audio channels over Q-LAN/AES67 and includes onboard Flex analog I/O plus GPIO, so integrators can mix networked and physical connections. Built-in acoustic echo cancellation, VoIP, USB AV bridging and the full Q-SYS Control engine make it a flexible core for conferencing and automation,...

The QSC CP12 is a compact, lightweight 12-inch two-way powered loudspeaker for portable PA, small-to-medium venues, corporate AV, houses of worship, and floor-monitor use. A 1000 watt Class-D amplifier drives a 12-inch woofer and a 1.4-inch compression driver, delivering higher output and lower reach than the smaller CP8 while staying easy to transport. One-touch DSP contours simplify voicing for common applications, and the angled cabinet lets the speaker double as a stage monitor.Key...

The QSC CP12 Outdoor Cover is a weather-resistant protective cover made for the QSC CP12 compact powered loudspeaker when it is installed or used outdoors. It is a protection accessory, not a speaker. The cover fits over the CP12 cabinet to shield it from rain, sun, dust, and debris during outdoor events or in semi-permanent outdoor placements, helping extend the life of the loudspeaker between uses.Key FeaturesWeather-resistant cover for the QSC CP12Shields against rain, sun, dust, and...

The QSC CP12 Tote is a padded, soft-sided carry bag made specifically for the QSC CP12 compact powered loudspeaker. It is a transport and protection accessory, not a speaker. The tote wraps the larger CP12 cabinet in cushioned padding to protect it from scuffs, dust, and knocks during transport and storage, with a carry handle for convenient movement between gigs and installations.Key FeaturesCustom-fit padded tote for the QSC CP12Protects the cabinet during transport and storageSoft,...