Audio & Video

The QSC AD-MC245 is a full-capture marine mounting collar for QSC AcousticDesign ceiling loudspeakers, supplied as a set of six pieces. It is an installation accessory, not a loudspeaker. The collar secures a compatible AD-series ceiling speaker into a 245 mm cutout using a full-capture, bayonet-style socket, giving the assembly extra hold and corrosion resistance for humid, wet, or marine environments such as pool decks, spas, and covered outdoor areas.Key FeaturesFull-capture marine...

The QSC AD-MG245 is an installation accessory, not a loudspeaker. It is a full-capture marine grille designed for QSC AcousticDesign ceiling loudspeakers with a 245 mm cutout -- specifically the AD-C4T-LP and AD-C6T models. The corrosion-resistant grille adds environmental protection for the speaker in humid, wet, or marine-type installations while retaining the driver securely. It is typically sold as a set of six grilles.Key FeaturesFull-capture marine grille accessory for added...

The QSC AD-MR4 is an installation accessory, not a loudspeaker. It is a flanged mud-ring (rough-in) bracket used to pre-install QSC AcousticDesign AD-C4T ceiling loudspeakers into drywall or plaster ceilings. Installers mount the ring during construction so the drywall can be finished flush around it, allowing the ceiling speaker to be added cleanly later without cutting into the completed ceiling. It is typically sold in a set of six rings.Key FeaturesFlanged mud-ring rough-in bracket for...

The QSC AD-MR6 is an installation accessory, not a loudspeaker. It is a flanged mud-ring (rough-in) bracket used to pre-install QSC AcousticDesign ceiling loudspeakers -- compatible with AD-C4T-LP and AD-C6T models -- into drywall or plaster ceilings. Fitted during construction, it lets the drywall be finished flush around the opening so the ceiling speaker can be added later with a clean cutout and no cutting into the finished ceiling. It is typically sold in a set of six rings.Key...

The QSC AD-MR8 is an installation accessory, not a loudspeaker. It is a flanged mud-ring (rough-in) bracket used to pre-install the QSC AcousticDesign AD-C6T-LP ceiling loudspeaker into drywall or plaster ceilings. Installed during construction, it allows the drywall to be finished flush around the opening so the ceiling speaker can be dropped in later with a clean cutout and no cutting into the finished ceiling. It is typically sold in a set of six rings.Key FeaturesFlanged mud-ring rough-in...

The QSC AD-P.HALO is an AcousticDesign integrated subwoofer/satellite pendant loudspeaker system, and this AD-P.HALO-BK version is finished in black. Designed to hang from open ceilings in spaces without a solid drop ceiling, it combines a downward-firing subwoofer section with satellite transducers arranged to spread even, wide coverage across the room. The all-in-one pendant delivers full-range music and speech from a single suspended unit, simplifying design and install in venues like...

The QSC AD-P.HALO is an AcousticDesign integrated subwoofer/satellite pendant loudspeaker system, and this AD-P.HALO-WH version is finished in white. Built to suspend from open or exposed ceilings, it pairs a downward-firing subwoofer with satellite transducers that distribute wide, even sound across the space below. The self-contained pendant provides full-range music and speech from one suspended unit, streamlining audio design for atriums, hospitality venues and retail environments that...

The QSC AD-P.SAT is a compact pendant-mount satellite loudspeaker from the AcousticDesign Series SUB/SAT line, designed to pair with an AD Series pendant subwoofer for full-range background music where depth and clarity are needed even at low volume. A single small satellite handles mid and high frequencies, letting a matching subwoofer carry the low end for a discreet, high-quality distributed system in restaurants, lobbies, and open ceilings. This satellite ships in black. Note that this is...

The QSC AD-P.SAT is a compact pendant-mount satellite loudspeaker from the AcousticDesign Series SUB/SAT line, designed to pair with an AD Series pendant subwoofer for full-range background music where depth and clarity are needed even at low volume. A single small satellite handles mid and high frequencies, letting a matching subwoofer carry the low end for a discreet, high-quality distributed system in restaurants, lobbies, and open ceilings. This satellite ships in white. Note that this is...

The QSC AD-P.SUB is a small-format passive pendant subwoofer from the AcousticDesign Series SUB/SAT line. It anchors the low end of a discreet pendant system, pairing with AD Series pendant satellites to deliver full-range background music with real depth and warmth even at modest listening levels. A 6.5-inch dual voice-coil driver and integrated multi-tap transformer make it easy to deploy on 70V or 100V distributed lines or in low-impedance mode. This model ships in black.Key...

The QSC AD-P.SUB is a small-format passive pendant subwoofer from the AcousticDesign Series SUB/SAT line. It anchors the low end of a discreet pendant system, pairing with AD Series pendant satellites to deliver full-range background music with real depth and warmth even at modest listening levels. A 6.5-inch dual voice-coil driver and integrated multi-tap transformer make it easy to deploy on 70V or 100V distributed lines or in low-impedance mode. This model ships in white.Key...

The QSC AD-P4T is a 4.5-inch two-way pendant-mount loudspeaker from the premium AcousticDesign Series, made for open-ceiling spaces such as retail, restaurants, atriums, and warehouses where in-ceiling mounting is not possible. Its DMT (Directivity Matched Transition) waveguide provides smooth, even coverage and consistent tonal balance on and off axis. An integrated 70/100V transformer with 16-ohm bypass makes system design flexible. This model ships in black.Key Features4.5-inch paper cone...

The QSC AD-P4T is a 4.5-inch two-way pendant-mount loudspeaker from the premium AcousticDesign Series, made for open-ceiling spaces such as retail, restaurants, atriums, and warehouses where in-ceiling mounting is not possible. Its DMT (Directivity Matched Transition) waveguide provides smooth, even coverage and consistent tonal balance on and off axis. An integrated 70/100V transformer with 16-ohm bypass makes system design flexible. This model ships in white.Key Features4.5-inch paper cone...

The QSC AD-P6T is a two-way pendant-mount loudspeaker from the AcousticDesign Series, built for open-ceiling spaces such as lobbies, retail, restaurants, atriums and other architectural interiors where ceiling tiles are absent. It hangs from the structure above and delivers even, wide coverage of background music and paging.Key Features6.5-inch woofer with 0.75-inch tweeter for full-range reproductionWide 135-degree conical DMT (Directivity Matched Transition) coverageLow-saturation, low-loss...

The QSC AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker from the premium AcousticDesign Series, built to deliver full-range foreground and background sound in open-ceiling venues like retail stores, restaurants, hotels, and atriums. A DMT (Directivity Matched Transition) waveguide gives smooth, consistent 135-degree coverage with excellent off-axis response. The integrated 70/100V transformer, with taps up to 60W and a 16-ohm bypass, adapts easily to distributed or low-impedance...

The QSC AD-P6T is a 6.5-inch two-way pendant-mount loudspeaker from the premium AcousticDesign Series, built to deliver full-range foreground and background sound in open-ceiling venues like retail stores, restaurants, hotels, and atriums. A DMT (Directivity Matched Transition) waveguide gives smooth, consistent 135-degree coverage with excellent off-axis response. The integrated 70/100V transformer, with taps up to 60W and a 16-ohm bypass, adapts easily to distributed or low-impedance...

The QSC AD-S.SAT is a compact surface-mount satellite loudspeaker from the AcousticDesign Series, part of the SUB/SAT background-music system. This BK version has a black finish. With a single 2.75-inch weather-treated woofer, it is designed to deliver discreet, even mid/high coverage in retail, hospitality and small commercial spaces, and it is intended to be paired with an AcousticDesign subwoofer such as the AD-S.SUB rather than run full-range on its own.Key Features2.75" weather-treated...

The QSC AD-S.SAT is a compact surface-mount satellite loudspeaker from the AcousticDesign Series, part of the SUB/SAT background-music system. This WH version has a white finish. With a single 2.75-inch weather-treated woofer, it delivers discreet, even mid/high coverage in retail, hospitality and small commercial spaces, and it is intended to be paired with an AcousticDesign subwoofer such as the AD-S.SUB rather than run full-range on its own.Key Features2.75" weather-treated woofer with...

The QSC AD-S.SUB is a compact surface-mount subwoofer from the AcousticDesign Series, built to anchor the low end of a SUB/SAT background-music system in retail, hospitality and small commercial rooms. This BK version has a black finish. It uses a 6.5-inch dual-voice-coil woofer and provides four built-in high-pass-filtered outputs so it can feed and integrate directly with AD-S.SAT satellite speakers, simplifying wiring for a complete small-format system.Key Features6.5" dual voice coil...

The QSC AD-S.SUB is a compact surface-mount subwoofer from the AcousticDesign Series, built to anchor the low end of a SUB/SAT background-music system in retail, hospitality and small commercial rooms. This WH version has a white finish. It uses a 6.5-inch dual-voice-coil woofer and provides four built-in high-pass-filtered outputs so it can feed and integrate directly with AD-S.SAT satellite speakers, simplifying wiring for a complete small-format system.Key Features6.5" dual voice coil...

The QSC AD-S10T is a 10-inch two-way surface-mount loudspeaker from the AcousticDesign Series, the highest-output surface model in the small-format line, intended for larger venues, worship spaces, gyms and multipurpose rooms that need strong full-range coverage from a wall or structure. This BK version has a black finish. It pairs a 10-inch woofer with a 1.4-inch compression driver and includes a 70V/100V multi-tap transformer plus an 8-ohm bypass for low-impedance use.Key Features10" woofer...

The QSC AD-S10T is a 10-inch two-way surface-mount loudspeaker from the AcousticDesign Series, the highest-output surface model in the small-format line, intended for larger venues, worship spaces, gyms and multipurpose rooms that need strong full-range coverage from a wall or structure. This WH version has a white finish. It pairs a 10-inch woofer with a 1.4-inch compression driver and includes a 70V/100V multi-tap transformer plus an 8-ohm bypass for low-impedance use.Key Features10" woofer...

The QSC AD-S112sw is a compact surface-mount subwoofer from the AcousticDesign Series, designed to add low-frequency reinforcement to installed sound systems in restaurants, retail, clubs, schools, and worship venues. Its single 12-inch direct-radiating woofer operates at low impedance (8 ohm) and shares the weather-resistant styling of the AD-S full-range models, so it blends visually with matching satellites indoors or in covered outdoor areas. This is the black finish.Key FeaturesSingle...

The QSC AD-S112sw is a compact surface-mount subwoofer from the AcousticDesign Series, made to extend the low-frequency response of installed sound systems in restaurants, retail, clubs, schools, and worship venues. Its 12-inch direct-radiating woofer runs at low impedance (8 ohm) and carries the same weather-resistant styling as the AD-S full-range loudspeakers, letting it match satellites visually indoors or in covered outdoor spaces. This is the white finish.Key FeaturesSingle 12-inch...