Audio & Video

Biamp SPA-GRB500 Black replacement grille for Desono ceiling loudspeakers, 6-pack The SPA-GRB500 supplies a set of six black round grilles engineered for Biamp Desono DX-series in-ceiling loudspeakers, giving integrators a discreet, low-profile finish where a white grille would stand out against darker ceilings or design-driven interiors. The steel grille seats cleanly over the loudspeaker baffle and is perforated for transparent, uncoloured audio pass-through. Supplied as a multi-pack, it...

Biamp SPA-GRB510 Black replacement grille for Desono ceiling loudspeakers, 6-pack The SPA-GRB510 provides six black grilles from Biamp's Desono ceiling loudspeaker accessory range, giving installers a matte-black alternative to the standard white finish. Manufactured from perforated steel, each grille seats over the loudspeaker baffle to protect the driver while allowing clean, transparent audio to pass into the room. The black finish is intended for darker ceilings, exposed-structure designs...

Biamp SPA-GRB600 Black round grille for Desono DX-IC10 ceiling loudspeakers, 6-pack The SPA-GRB600 delivers six black round grilles sized for Biamp Desono DX-IC10 full-range ceiling loudspeakers and the DX-IC10SUB in-ceiling subwoofer. The larger-diameter grille lets integrators specify a uniform matte-black look across high-output ceiling systems where the standard white grille would be visually intrusive. Built from perforated steel, each grille protects the driver while passing audio...

Biamp SPA-GSQ100 Square grille accessory for Desono CM-series ceiling loudspeakers The SPA-GSQ100 is a square grille option for Biamp Desono CM-series in-ceiling loudspeakers, including the CM20DTS, CM30DTD and CM60DTD. It replaces the standard round grille with a squared architectural profile, allowing the loudspeaker to align visually with square ceiling tiles, downlights and diffusers for a cleaner, coordinated ceiling plane. The white grille is perforated to preserve the loudspeaker's...

Biamp SPA-HBC100 10 Pack Beam clamp kit for suspended commercial loudspeakers, 10-pack The SPA-HBC100 10 Pack provides ten beam clamp kits used to suspend Biamp commercial loudspeakers, including pendant and surface models, from overhead steel structure. Each clamp attaches to a building beam or joist flange to create a secure anchor point for hanging hardware, giving integrators a reliable method for installing loudspeakers in open ceilings and exposed-structure spaces. Sold as a multi-pack,...

Biamp SPA-HCA100 10 Pack Conduit adapter kit for H-series pendant loudspeakers, 10-pack The SPA-HCA100 10 Pack supplies ten conduit adapter kits with a 1/2-inch NPT thread for Biamp H10, H20 and H30 pendant loudspeakers. The adapter allows the loudspeaker to be connected to standard rigid or flexible electrical conduit, providing a clean, code-conscious cable path from the structure down to a suspended loudspeaker. By routing cabling through conduit rather than leaving it exposed, integrators...

Biamp SPA-HMB100 10 Pack Dual gang box mounting bracket kit for H-series loudspeakers, 10-pack The SPA-HMB100 10 Pack provides ten dual gang box mounting bracket kits for Biamp H10, H20 and H30 loudspeakers and the MPLT62 mounting plate. The bracket interfaces the loudspeaker with a standard dual gang electrical box, giving integrators a familiar, code-friendly anchor point on walls and other surfaces without custom fabrication. Using a common gang-box footprint speeds installation and helps...

Biamp SPA-NC100 New construction bracket for Desono ceiling loudspeakers, 6-pack The SPA-NC100 is a new construction mounting bracket for Biamp Desono ceiling loudspeakers, sized for compact models such as the CM20DTS and CM30DTD. Installed into the ceiling framing before the finished surface is applied, the bracket establishes a precise cutout location and provides a rigid, pre-set mounting position for the loudspeaker. Fitting brackets during the rough-in stage lets contractors coordinate...

Biamp SPA-NC200 New construction bracket for Desono ceiling loudspeakers, 6-pack The SPA-NC200 is a new construction mounting bracket from Biamp's Desono ceiling loudspeaker accessory range, sized to match a specific Desono model. Fitted into the ceiling framing during rough-in, it locks in an accurate cutout position and provides a rigid mounting point so loudspeakers can be added cleanly once the finished ceiling is complete. Coordinating loudspeaker locations at the framing stage helps...

Biamp SPA-NC300 New construction bracket for Desono ceiling loudspeakers, 6-pack The SPA-NC300 is a new construction mounting bracket in Biamp's Desono ceiling loudspeaker accessory line, sized to suit a specific Desono model. It is installed into the ceiling framing before the finished surface goes up, establishing an exact cutout location and a solid, pre-positioned anchor for the loudspeaker to follow. Setting brackets during rough-in lets project teams align ceiling audio with lighting,...

Biamp SPA-NC400 New construction bracket for Desono ceiling loudspeakers, 6-pack The SPA-NC400 is a new construction mounting bracket for Biamp Desono ceiling loudspeakers, dimensioned for a particular model in the range. Installed into the ceiling structure during the rough-in phase, it fixes the loudspeaker cutout position and provides a rigid, pre-set anchor that keeps final loudspeaker fitting fast and accurate. Locating brackets before the ceiling is closed allows integrators to...

Biamp SPA-NC500 New construction bracket for Desono ceiling loudspeakers, 6-pack The SPA-NC500 is a new construction mounting bracket from Biamp's Desono ceiling loudspeaker accessory range, sized for a larger model in the family. Fitted into the ceiling framing during rough-in, it defines the loudspeaker cutout and provides a firm, pre-positioned mount so the loudspeaker can be added neatly once the ceiling is finished. Placing brackets ahead of the finished surface lets contractors...

Biamp SPA-NC600 New construction bracket for Desono DX-IC10 ceiling loudspeakers, 6-pack The SPA-NC600 is a new construction mounting bracket sized for Biamp's larger Desono ceiling loudspeakers, including the DX-IC10. Installed into the ceiling framing during rough-in, it sets the loudspeaker cutout location and provides a strong, pre-positioned anchor able to support the higher mass of larger ceiling loudspeakers. Fitting brackets before the finished ceiling is installed lets integrators...

Biamp SPA-RAIL48 48-inch tile rail for drop-ceiling loudspeaker support The SPA-RAIL48 is a 48-inch (1200 mm) tile rail that supports Biamp Desono ceiling loudspeakers within a suspended, tile grid ceiling. Spanning across the ceiling grid, the rail carries the loudspeaker's weight independently of the ceiling tile, transferring load to the structural grid for a safe, code-conscious installation. The rail suits a wide range of Desono in-ceiling models and simplifies retrofit and new-build work...

Biamp SPA-SCC100 10 Pack Safety cable kit for drop-ceiling loudspeakers, 10-pack The SPA-SCC100 10 Pack provides ten safety cable kits for Biamp ceiling loudspeakers installed in suspended, drop-ceiling systems. Each kit adds an independent secondary support that tethers the loudspeaker to the building structure, protecting against accidental fall in the event that primary mounting hardware is disturbed. Secondary safety support is frequently required by local codes and best-practice...

Biamp SPA-TR100 Trim ring for Desono ceiling loudspeakers, 10-pack The SPA-TR100 provides ten trim rings for Biamp Desono ceiling loudspeakers, giving installers a clean, finished edge where the loudspeaker meets the ceiling. The ring conceals the cutout perimeter and any minor gaps, producing a neat flush appearance without the need for additional filling or touch-up around the loudspeaker. Sold as a multi-pack, the trim rings are ideal for larger projects that demand a uniform look across...

Biamp SPA-TR200 Trim ring for Desono CM60DTD ceiling loudspeakers, 10-pack The SPA-TR200 supplies ten trim rings sized for Biamp Desono ceiling loudspeakers such as the CM60DTD. The ring finishes the transition between loudspeaker and ceiling, hiding the cutout edge and small imperfections to deliver a crisp, flush-mounted appearance without additional patching around the fixture. As a multi-pack, it helps integrators achieve a consistent look across many loudspeakers on larger installations....

Biamp SPA-TR300 Trim ring for Desono ceiling loudspeakers, 10-pack The SPA-TR300 offers ten trim rings for Biamp Desono ceiling loudspeakers, sized to suit a specific model in the range. The ring frames the loudspeaker where it meets the ceiling, covering the cutout edge and small gaps to give a neat, professional flush finish without the need for extra filling or touch-up. Delivered as a multi-pack, it helps maintain a uniform appearance across many loudspeakers on larger projects. The white,...

Biamp SPA-TR400 Trim ring for Desono ceiling loudspeakers, 10-pack The SPA-TR400 provides ten trim rings for Biamp Desono ceiling loudspeakers, dimensioned for a larger model in the family. The ring finishes the boundary between loudspeaker and ceiling, concealing the cutout edge and minor gaps to achieve a clean, flush-mounted look without additional patching around the fixture. Supplied as a multi-pack, it supports a consistent appearance across many loudspeakers on larger installations. The...

Biamp SPA-UBDX100 ClickMount U-bracket kit for Desono DX-S5 surface loudspeakers The SPA-UBDX100 is a U-bracket kit that mounts the Biamp Desono DX-S5 surface loudspeaker to a wall, ceiling or other surface. The aluminium bracket cradles the loudspeaker between two arms and allows it to be angled and locked toward the listening area, giving integrators precise aiming for even coverage. The kit incorporates Biamp's ClickPlug connection system, which speeds cabling and helps maintain a clean,...

Biamp SPA-UBDX200 ClickMount U-bracket kit for Desono DX-S8 surface loudspeakers The SPA-UBDX200 is a U-bracket kit for mounting the Biamp Desono DX-S8 surface loudspeaker to walls, ceilings and other surfaces. The larger aluminium bracket holds the loudspeaker securely between two arms and allows it to be tilted and locked toward the audience, letting integrators fine-tune aim for consistent coverage across the space. Featuring Biamp's ClickPlug connection system, the kit simplifies cabling...

Biamp SUBWOOFERS Desono SUBLIME Ultra-compact passive subwoofer for satellite loudspeaker systems The Desono SUBLIME is an ultra-compact passive subwoofer designed to extend the low-frequency response of small satellite loudspeaker systems. Built around a 6.5-inch dual voice coil driver, it presents two channels of bass reinforcement and passes full-range, loudspeaker-level output on to a pair of connected satellite speakers, simplifying distributed audio wiring. Its small enclosure allows...

Biamp TABLETOP Devio DTM-1 Beamtracking tabletop microphone for Devio conferencing systems The Devio DTM-1 is a tabletop microphone that extends voice pickup for Biamp Devio collaboration hubs in meeting rooms. Using Biamp Beamtracking technology, it automatically follows active talkers around the table, capturing clear speech and helping remote participants hear conversations naturally without manual microphone adjustment. Placed on the conference table and connected to a Devio hub, the DTM-1...

Biamp TABLETOP Devio SCR-20T Devio conferencing hub with tabletop microphone for small meeting spaces The Devio SCR-20T packages a Devio SCR-20 conferencing hub together with a tabletop microphone, delivering a room-ready audio front end for huddle and small conference spaces. It bridges in-room microphones and loudspeakers to a connected computer over a single USB link, so the room works seamlessly with the soft codec of the user's choice for calls and video meetings. Onboard signal...