The WAC Lighting LED 90 Button Light (HR-LED90-27-WT) is a slim, edge-lit LEDme puck light for cabinets, shelving, display cases and closets. Its 2-inch profile and white finish keep the fixture discreet, and the 2700K warm white output at 90 CRI shows wood, stone, food and merchandise in natural color. It suits residential kitchens and built-ins as well as hotel casework, restaurant back bars, retail displays and office millwork. The fixture runs on 24 VAC from a separate WAC Class 2 transformer.
Key Features
- Edge-lit LED design spreads light evenly and cuts glare
- 2700K color temperature with 90 CRI
- 200 delivered lumens from 5 watts
- Smooth dimming to 5% with an ELV dimmer through a compatible transformer
- Recessed mount in a 3-1/4 inch cut-out or surface mount with the included back plate
- Super-thin 2 inch profile, die-cast aluminum fixture
- 72 inch pre-installed lead wire
- 100,000 hour rated life, ETL/cETL damp location listed
Ideal Applications
Under-cabinet and in-cabinet kitchen lighting, glass-front display cabinets, bookcases and shelving, closets, retail showcases, hospitality back bars and casework, and office reception millwork.
Compatibility
Requires a 24V Class 2 transformer, sold separately. WAC lists the EN-2460-P-AR plug-in (60W), the EN-2460-RB2 and EN-24100-RB2 remote transformers, and the EN-24100-277-RB2-T 0-10V remote power supply for this fixture. Several button lights can share one transformer up to its rated load, and the MTB-01 multiple terminal block simplifies wiring.
Frequently Asked Questions
Do I need a transformer?
Yes. The LED 90 runs on 24 VAC and needs a WAC 24V Class 2 transformer, sold separately. Total fixture wattage must stay within the transformer's rated load.
Is it dimmable?
Yes. It dims from 100% to 5% with an electronic low voltage (ELV) dimmer such as the Lutron DVELV-300 or SELV-300, used with a WAC ELV-dimmable transformer.
What cut-out size is needed for recessed mounting?
Cut a 3-1/4 inch hole. Compression springs hold the trim in place and a magnet secures the light. For surface mounting, screw the back plate to the cabinet and snap the light on. WAC does not recommend surface mounting on a ceiling.
Can it be used in damp locations, and what is the warranty?
It is ETL and cETL listed for damp locations. It is rated for 100,000 hours and carries a 5 year WAC Lighting warranty.