The WAC Lighting Lotos 6in Round Downlight (R6ERDR-W9CS-WT) is a slim canless LED recessed light with a remote driver that delivers bright, even general lighting from a fixture only a fraction of the depth of a traditional can. It installs through a round cut-out, clips to the ceiling and lets the installer set color temperature on site. That flexibility makes it a go-to fixture for whole-home remodels and new builds as well as offices, hospitality, restaurants and retail spaces that want a uniform ceiling plane.
Key Features
- 1200 delivered lumens from a multiple-LED array
- 5-CCT slide switch: 2700K, 3000K, 3500K, 4000K or 5000K
- 90 CRI for natural, accurate color
- Frosted TIR lens for smooth, low-glare light
- IC rated, airtight and Wet Location Listed
- Universal 120-277 VAC input with ELV and TRIAC dimming to 5%
- Steel construction with a slim white trim
- Remote driver included, 50,000 hour rated life, 5 year warranty
Ideal Applications
General lighting in living rooms, kitchens, family rooms, basements and garages; bathrooms and covered patios; offices, classrooms and corridors; hotel guest rooms and lobbies; and restaurant or retail ceilings where a clean, low-profile look matters.
Compatibility
Runs on 120V to 277V circuits and dims with compatible ELV and TRIAC phase dimmers; WAC publishes a dimming report for the Lotos family. Use the WAC RER-FRAME Lotos frame-in kit for new construction. Coordinates with the Lotos 6in Round Adjustable (R6ERAR-W9CS-WT) where some fixtures need to be aimed.
Frequently Asked Questions
What size hole do I cut?
WAC's installation sheet calls for a 6 1/4in diameter hole for the R6ERDR. No recessed can is required; the driver box goes through the opening and torsion springs hold the trim tight to the ceiling.
Can it replace an old 6in can light?
It is designed as a canless fixture for drywall ceilings, installed as a remodel fixture or with the RER-FRAME kit in new construction. Confirm the opening matches the 6 1/4in cut-out and that the ceiling falls within the supported thickness.
Is it dimmable and rated for wet or insulated ceilings?
It dims 100% to 5% on ELV or TRIAC dimmers, is IC rated and airtight, and is Wet Location Listed.
Which color temperature should I choose?
You do not have to decide before ordering. A slide switch on the driver sets 2700K, 3000K, 3500K, 4000K or 5000K at installation. 2700K and 3000K give a warm, residential feel, 3500K is a neutral middle ground, and 4000K to 5000K suit offices, kitchens, garages and retail where a crisp white light is wanted.