• Ten 2-inch sections for exact-length and small-space installs
  • Warm 2700K light with 85 CRI
  • 1/8 in thin profile hides under shelves and cabinets
  • Peel-and-stick 3M adhesive for fast mounting
  • Damp location and closet rated, UL and cUL listed
  • 50,000-hour life with 5-year WAC warranty
Price: $67.95
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: LED-T24W-2IN-10-WT

    Overview

    The WAC Lighting InvisiLED Pro LED-T24W-2IN-10-WT is a ten-pack of 2-inch sections of InvisiLED Pro 24V tape light in 2700K warm white. These short sections let installers fill small gaps, finish a run to an exact length, or light tight spaces such as display niches, shelf edges, cabinet toe kicks and closet shelving where a full reel would be wasteful. They suit residential millwork as well as hospitality, retail and office casework where a precise, dot-free line of warm light is needed.

    Key Features

    • Pack of ten 2-inch tape sections, each drawing about 0.5W and delivering about 33 lumens
    • 2700K warm white output with 85 CRI for natural rendering of wood, fabric and finishes
    • Ultra-thin 1/8 in profile disappears under shelves, cabinets and coves
    • LEDs spaced 1 in on center for smooth, even illumination
    • Flexible silicone-cased tape with peel-and-stick 3M construction adhesive backing
    • Operates on 24V from a Class 2 WAC transformer or power supply
    • UL and cUL listed for damp locations and rated for clothes closet storage areas
    • 50,000-hour rated life backed by a 5-year WAC Lighting warranty

    Ideal Applications

    Short custom runs in kitchen and bath cabinetry, bookcases, retail display shelving, hotel millwork, bar back shelving, closet systems, and as fill pieces to complete longer InvisiLED Pro installations to the exact dimension required.

    Compatibility

    These sections are part of the InvisiLED Pro 24V system and connect with InvisiLED connectors, joiner cables, extension cables and lead wires. Power them with an InvisiLED 24V Class 2 transformer or power supply such as the EN-2460-RB2-T, EN-24100-RB2-T, PS-24DC-U60R-T or PS-24DC-U96R-T. InvisiLED surface and recessed aluminum channels and mounting clips are available for a finished look.

    Frequently Asked Questions

    Do I need a transformer or driver?

    Yes. InvisiLED Pro tape runs on 24V and must be powered by a Class 2 WAC transformer or power supply. Choose a 60W unit for runs up to 20 ft or a 96W unit for runs up to 33 ft.

    Can InvisiLED Pro be dimmed?

    Yes, dimming depends on the power supply. WAC remote supplies support ELV, TRIAC or 0-10V dimming down to about 5 percent, while the plug-in transformers are non-dimmable.

    Is it rated for wet or damp locations?

    It is UL and cUL listed for damp locations, so it works in bathrooms and covered areas, but it is not intended for direct wet exposure. It is also rated for closet storage areas.

    Which color temperature is this?

    The W code in the part number indicates 2700K warm white at 85 CRI. InvisiLED Pro is also offered in 3000K, 3500K and 4500K in other part numbers.

    Specifications

    ModelLED-T24W-2IN-10-WT
    SeriesInvisiLED Pro 24V Tape Light System
    Package10 sections, 2 in each
    PowerApprox. 0.5W per 2 in section (3W per ft)
    Light OutputApprox. 33 lm per 2 in section (200 lm per ft)
    Color Temperature2700K
    CRI85
    Input Voltage24V (Class 2 transformer or power supply required)
    LED Spacing1 in on center, 12 LEDs per ft
    Profile1/8 in
    ConstructionFlexible silicone-cased tape, 3M construction adhesive
    Tape ColorWhite
    DimmingELV, TRIAC or 0-10V, depending on power supply
    Max Run20 ft on 60W supply, 33 ft on 96W supply
    RatingUL and cUL listed for damp locations; rated for clothes closet storage areas
    Operating Temperature-4F to 122F (-20C to 50C)
    Rated Life50,000 hours
    Warranty5 years