The WAC Lighting EN-2460-P-AR-T is a 60 watt plug-in Class 2 electronic transformer made for InvisiLED tape light. It plugs into a standard 120V outlet and supplies 24V to InvisiLED runs, so no hardwiring is needed to power undercabinet, shelf or display lighting. The -T version includes a lead cable for InvisiLED tape systems, a 6 foot detachable cord and an on/off switch at the base. It is a fast, renter-friendly and retrofit-friendly way to light kitchens, closets, bookcases, retail displays, reception desks and home offices.
Key Features
- Plugs into a standard 120 VAC, 50/60 Hz outlet, outputs 24V
- 60 watt maximum load with a 1 watt minimum load
- Includes a lead cable for connecting InvisiLED tape light
- 6 ft (72 in) detachable cord with on/off toggle switch at the base
- Inherently protected and power limited Class 2 design
- Auto reset, soft start, short circuit and overload protection with automatic thermal protection
- Compact polycarbonate housing, 2.75 x 1.625 x 1.75 in
- UL and cUL listed for dry locations, 5 year WAC warranty
Ideal Applications
Plug-and-play lighting under kitchen cabinets, inside closets and pantries, on bookshelves and in display cabinets, and on retail or trade show fixtures where an outlet is nearby and hardwiring is not practical.
Compatibility
Built for WAC InvisiLED 24V tape light. A 100W version, EN-24100-P-AR-T, is available for longer runs. Class 2 transformers are required for most cabinet-listed fixtures.
Frequently Asked Questions
Do I need an electrician?
The transformer plugs into a 120V receptacle, so no line-voltage hardwiring is required. WAC still recommends installation by a qualified person in line with the NEC and local code.
Can I dim it?
WAC does not list dimming for this plug-in model. It switches on and off with the built-in toggle. For dimming, choose a hardwired ELV-dimmable transformer such as EN-24100-RB2-T.
Where can it be used?
It is listed for dry locations only. Keep it away from heat sources and out of damp or wet areas.
How far can I run wire to the tape?
WAC's instructions give maximum runs by wire gauge and load. At a full 60W load, for example, 18 AWG is limited to about 8 ft and 12 AWG to about 21 ft.