• Converts 120V line power to 24V for WAC low-voltage LED fixtures
  • 100W maximum output in a compact enclosed remote housing
  • ELV dimmable from 100% down to 10%
  • Class 2 output simplifies secondary wiring, no conduit required
  • Wide -40 to 122 F operating temperature range
  • UL and cUL listed with a 5 year WAC warranty
Price: $105.95
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: EN-24100-RB2

    Overview

    The WAC Lighting EN-24100-RB2 is a 100 watt Class 2 enclosed electronic transformer that converts standard 120V line power to the 24V needed by WAC low-voltage LED fixtures such as the LED 90 button light, InvisiLED tape and other 24V undercabinet and display lighting. Its remote, enclosed design lets an installer mount it out of sight inside a cabinet, soffit or ceiling space, then run Class 2 secondary wiring to the fixtures. It is a practical choice for kitchens, retail casework, hospitality millwork, back bars, office reception desks and residential display shelving.

    Key Features

    • 120 VAC, 50/60 Hz input with 24V output
    • 100 watt maximum output rating in a compact 6.5 x 1.625 x 1.25 in enclosure
    • Smooth electronic low voltage (ELV) dimming from 100% down to 10%
    • 1 watt minimum load, so even a single small fixture will run properly
    • Class 2 output limited to 5 amps for an intrinsically safer low-voltage circuit
    • Class 2 secondary wiring does not require conduit, sheathed cable or clamp wiring techniques
    • Rated for ambient temperatures from -40 to 122 degrees F
    • UL and cUL listed, black finish, backed by a 5 year WAC warranty

    Ideal Applications

    Use it to power runs of 24V button lights or tape light under kitchen cabinets, inside glass display cases, along retail shelving, in hotel and restaurant millwork, and in cove or toe-kick accents where the transformer needs to be hidden but accessible.

    Compatibility

    Designed for WAC 24V low-voltage fixtures. WAC lists it as a remote power option for the HR-LED90 LED 90 button light (up to 10 fixtures) and other 24V WAC products. Pair it with a compatible electronic low voltage (ELV) dimmer for dimming control.

    Frequently Asked Questions

    What dimmer do I need?

    Use an electronic low voltage (ELV) dimmer. WAC rates dimming from 100% to 10%. Magnetic low voltage and standard incandescent dimmers are not the specified control type.

    Is this transformer enclosed or non-enclosed?

    It is an enclosed remote transformer, so it can be mounted on its own away from the fixtures. If you need a tiny non-enclosed unit that installs inside a fixture or enclosure, see WAC EN-2460-R2.

    How many fixtures can it run?

    Keep the total connected load at or below the transformer rating. WAC lists it for up to 10 HR-LED90 button lights, which draw 5 watts each.

    Is it for new construction or retrofit?

    Both. It mounts remotely, so it works in new cabinetry and in retrofits where you can reach a 120V supply. A qualified electrician should make the line-voltage connections per the NEC and local code.

    Specifications

    ModelEN-24100-RB2
    TypeClass 2 enclosed remote electronic transformer
    Input120 VAC, 50/60 Hz
    Output24V
    Maximum Output100 W
    Minimum Load1 W
    DimmingELV, 100% to 10%
    Dimensions (L x W x H)6.5 in x 1.625 in x 1.25 in
    Operating Temperature-40 F to 122 F (-40 C to 50 C)
    FinishBlack
    CertificationsUL, cUL, Class 2
    Warranty5 years