• 8-inch two-way surface-mount speaker, 8 ohms, black
  • 62 Hz to 16 kHz (+/-3 dB), 91 dB sensitivity
  • Peaks to 118 dB SPL at 1 m
  • UV-resistant glass-filled HIPS cabinet
  • Aimable InvisiBall mount included
Price: $700.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CONTROL 28-1L

    Description

    The JBL Professional Control 28-1L steps up from the compact Control models with an 8-inch woofer and a 1-inch tweeter in a rugged black cabinet. It is the 8-ohm, direct-connect member of the Control 28 family, meant for amplifiers that drive low-impedance loads instead of 70-volt or 100-volt lines. The larger woofer reaches down to about 62 Hz (+/-3 dB), which gives music and announcements more body than a 5-inch speaker, and the 100 by 100 degree pattern covers wide rooms evenly. Typical uses include gyms, restaurants, bars, warehouses, houses of worship and covered patios. Its glass-filled polystyrene enclosure resists UV and weather, with an IP-44 rating and an IP-55 option using the WeatherMax grille and panel cover. The InvisiBall bracket in the box lets installers aim the speaker after the mount is fixed in place.

    Key Features

    • 8-inch woofer and 1-inch tweeter, 100 x 100 degree coverage
    • 8-ohm low-impedance wiring with a screw-down terminal strip
    • 91 dB sensitivity and 112 dB average maximum output
    • IP-44 rated; IP-55 with optional WeatherMax grille and MTC-PC2/PC3
    • InvisiBall wall mount and 6 mm x 180 mm hex key included

    Specifications

    ModelJBL Control 28-1L
    ColorBlack (RAL 9004)
    Impedance8 ohms (no 70V/100V taps listed)
    Low-frequency driver200 mm (8 in) woven-fiberglass cone, butyl rubber surround, Weather-Edge frame protection
    High-frequency driver25 mm (1 in) PEI diaphragm, ferrofluid, Kapton voice-coil former
    Frequency range (-10 dB)45 Hz - 20 kHz
    Frequency response (+/-3 dB)62 Hz - 16 kHz
    Sensitivity91 dB SPL, 1 W / 1 m (100 Hz - 10 kHz average)
    Maximum SPL (1 m)112 dB continuous pink noise average, 118 dB peak
    Power handling240 W continuous program (2 hr)
    Coverage100 deg H x 100 deg V
    DirectivityQ 7.3, DI 8.3 dB (1 kHz - 16 kHz average)
    Crossover2nd-order low-pass, 1st-order high-pass with conjugate shaping
    ConnectorsScrew-down terminal strip; open lugs up to 9 mm OD (#6, #8, #10) or bare wire to 12 AWG (2.5 mm2)
    EnclosureHigh-impact polystyrene (HIPS) with 10% glass fill, UV-resistant paint; zinc-plated steel grille with TGIC polyester powder coat
    MountingIncluded InvisiBall aimable wall mount; two 6 mm points for optional MTC-28UB-1 U-bracket; rear safety loop
    Dimensions (H x W x D)386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep on InvisiBall bracket
    EnvironmentalIP-44; IP-55 with optional MTC-28WMG-1 grille and MTC-PC2/PC3 panel cover
    IncludedInvisiBall wall-mount system, 6 x 180 mm hex key
    Net weight6.2 kg (13.5 lb) each