• White 8-inch two-way speaker with 8-ohm, 70V and 100V operation
  • 112 dB average / 118 dB peak output at 1 m
  • 100 x 100 degree coverage
  • Weather-resistant enclosure, IP-44
  • Aimable InvisiBall mounting included
Price: $762.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CONTROL 28-1-WH

    Description

    The Control 28-1 is JBL Professional's high-output 8-inch surface-mount loudspeaker, and this white version is made for rooms where the speaker has to disappear into light surfaces while still delivering real volume. A 200 mm woofer and 25 mm ferrofluid-cooled PEI tweeter reproduce speech and music from about 62 Hz to 16 kHz (+/-3 dB), and a 100 by 100 degree dispersion pattern keeps coverage consistent across the room. A built-in transformer gives installers the choice of 8-ohm operation or 70-volt and 100-volt distributed lines, which is handy in gymnasiums, auditoriums, restaurants, retail stores, warehouses and covered outdoor areas. The weather-ready enclosure carries an IP-44 rating (IP-55 with the optional WeatherMax grille and panel cover) and is finished with UV-resistant paint. The supplied InvisiBall mount lets you aim the cabinet after it is installed.

    Key Features

    • 8-ohm direct setting plus 70V (60/30/15/7.5 W) and 100V (60/30/15 W) taps
    • 8-inch woofer and 1-inch tweeter with 91 dB sensitivity
    • 240 W continuous program power handling
    • Glass-filled HIPS cabinet, IP-44 rated, white finish
    • InvisiBall mount and hex key included

    Specifications

    ModelJBL Control 28-1
    ColorWhite (RAL 9016)
    Impedance8 ohms (THRU setting)
    70V taps60 W, 30 W, 15 W, 7.5 W
    100V taps60 W, 30 W, 15 W
    Transformer insertion lossLess than 0.94 dB at any tap
    Low-frequency driver200 mm (8 in) woven-fiberglass cone, butyl rubber surround, Weather-Edge frame protection
    High-frequency driver25 mm (1 in) PEI diaphragm, ferrofluid, Kapton voice-coil former
    Frequency range (-10 dB)45 Hz - 20 kHz
    Frequency response (+/-3 dB)62 Hz - 16 kHz
    Sensitivity91 dB SPL, 1 W / 1 m (100 Hz - 10 kHz average)
    Maximum SPL (1 m)112 dB continuous pink noise average, 118 dB peak
    Power handling240 W continuous program (2 hr)
    Coverage100 deg H x 100 deg V
    DirectivityQ 7.3, DI 8.3 dB (1 kHz - 16 kHz average)
    Crossover2nd-order low-pass, 1st-order high-pass with conjugate shaping
    ConnectorsScrew-down terminal strip; open lugs up to 9 mm OD (#6, #8, #10) or bare wire to 12 AWG (2.5 mm2)
    EnclosureHigh-impact polystyrene (HIPS) with 10% glass fill, UV-resistant paint; zinc-plated steel grille with TGIC polyester powder coat
    MountingIncluded InvisiBall aimable wall mount; two 6 mm points for optional MTC-28UB-1 U-bracket; rear safety loop
    Dimensions (H x W x D)386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep on InvisiBall bracket
    EnvironmentalIP-44; IP-55 with optional MTC-28WMG-1 grille and MTC-PC2/PC3 panel cover
    IncludedInvisiBall wall-mount system, 6 x 180 mm hex key
    Net weight6.8 kg (15.0 lb) each