| Model | JBL Control 25AV |
| Color | Black |
| Low-frequency driver | 130 mm (5.25 in) polypropylene-coated paper cone, WeatherEdge surround, 25 mm voice coil on Kapton former |
| High-frequency driver | 20 mm (0.75 in) titanium-coated PEI horn-loaded tweeter |
| Frequency range (-10 dB) | 70 Hz - 23 kHz |
| Sensitivity | 87 dB SPL, 1 W / 1 m |
| Maximum SPL (1 m) | 107 dB continuous average pink noise, 113 dB continuous peak |
| Power handling | 200 W continuous program; 100 W continuous pink noise |
| Impedance | 8 ohms nominal (minimum 6.7 ohms at 230 Hz) |
| 70V taps | 60 W, 30 W, 15 W, 7.5 W |
| 100V taps | 60 W, 30 W, 15 W |
| Transformer | 60 W, listed to UL 1876, with 8-ohm through setting |
| Coverage | 100 deg H x 100 deg V |
| Directivity | Q 4.9, DI 6.9 dB (500 Hz - 4 kHz average) |
| Magnetic shielding | Video shielded for use near monitors |
| Connectors | Screw-down terminal strip; open lugs up to 9 mm OD (#6, #8, #10) or bare wire to 12 AWG |
| Protection | Full-range power limiting with internal fuse for severe overload |
| Enclosure | High-impact polystyrene; painted stainless-steel grille |
| Environmental | Exceeds MIL-STD-810 (humidity, salt spray, temperature, UV); IP-X4 splashproof |
| Dimensions (H x W x D) | 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in) |
| Net weight | 4.0 kg (9 lb) each |
| Mounting | InvisiBall aimable wall mount included |
| Included | InvisiBall base, MTC-PC input panel covers (pair), 6 x 100 mm hex wrench |