• Compact 5.25-inch two-way surface-mount speaker, 8 ohms, white finish
  • Roughly 85 Hz to 17 kHz (+/-3 dB) with 90 dB sensitivity
  • 100 x 100 degree coverage for background and foreground audio
  • Aimable InvisiBall wall mount included
  • IP-44 weather rating for sheltered indoor and outdoor spaces
Price: $454.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CONTROL 25-1L-WH

    Description

    The JBL Professional Control 25-1L is a compact two-way surface-mount loudspeaker built for direct 8-ohm connection to a standard power amplifier, with no transformer in the signal path. This white version blends into light-colored walls and ceilings, which makes it a practical fit for restaurants, retail floors, offices, houses of worship and patios where speakers need to be heard but not noticed. A 5.25-inch woven-fiberglass woofer and a 0.75-inch ferrofluid-cooled PEI tweeter deliver clear speech and music across a 100 by 100 degree coverage pattern, so a few units can spread sound evenly through a room. The built-in InvisiBall mount lets you aim the cabinet after it is fastened to the wall, and the UV-resistant enclosure carries an IP-44 rating for sheltered outdoor locations, with IP-55 available when paired with the optional WeatherMax grille and panel cover.

    Key Features

    • 5.25-inch woofer and 0.75-inch tweeter in a compact HIPS cabinet
    • 8-ohm low-impedance model for conventional amplifier hookups
    • 100 x 100 degree conical coverage for even room fill
    • InvisiBall wall mount and hex key included
    • IP-44 rated; IP-55 with optional WeatherMax grille and MTC-PC2 or MTC-PC3 cover
    • Screw-down terminal strip accepts bare wire up to 12 AWG

    Specifications

    ModelJBL Control 25-1L
    ColorWhite (RAL 9016)
    Impedance8 ohms (no 70V/100V taps listed)
    Low-frequency driver135 mm (5.25 in) woven-fiberglass cone, butyl rubber surround
    High-frequency driver19 mm (0.75 in) PEI diaphragm, ferrofluid-cooled, Kapton voice-coil former
    Frequency range (-10 dB)60 Hz - 20 kHz
    Frequency response (+/-3 dB)85 Hz - 17 kHz
    Sensitivity90 dB SPL, 1 W / 1 m (100 Hz - 10 kHz average)
    Maximum SPL (1 m)110 dB continuous pink noise average, 116 dB peak (calculated)
    Power handling200 W continuous program (2 hr)
    Coverage100 deg H x 100 deg V
    DirectivityQ 6.04, DI 7.6 dB (1 kHz - 16 kHz average)
    Crossover2nd-order low-pass, 3rd-order high-pass
    ConnectorsScrew-down terminal strip; open lugs up to 9 mm OD (#6, #8, #10) or bare wire to 12 AWG (2.5 mm2)
    EnclosureHigh-impact polystyrene (HIPS), UV-resistant paint; zinc-plated steel grille with TGIC polyester powder coat
    MountingBuilt-in InvisiBall aimable wall mount; two 6 mm points for optional U-bracket; rear safety loop
    Dimensions (H x W x D)243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep on InvisiBall bracket
    EnvironmentalIP-44; IP-55 with optional WeatherMax grille and MTC-PC2/PC3 panel cover
    IncludedInvisiBall wall-mount system, 6 x 100 mm hex key
    Net weight3.0 kg (6.7 lb) each