• Two-way 5.25-inch surface-mount speaker with 8-ohm, 70V and 100V operation
  • 70V taps of 30, 15, 7.5 and 3.7 W; 100V taps of 30, 15 and 7.5 W
  • 85 Hz to 17 kHz (+/-3 dB), 90 dB sensitivity
  • Included InvisiBall mount for aim after installation
  • White, IP-44 rated enclosure
Price: $470.00
    Availability: Low inventory - chat with us to confirm stock

    Item #: CONTROL 25-1-WH

    Description

    The Control 25-1 from JBL Professional is a compact two-way surface-mount loudspeaker with a built-in line transformer, so the same white cabinet can run from an 8-ohm amplifier or from a 70-volt or 100-volt distributed system. That flexibility suits stores, cafes, schools, offices and covered patios where several speakers share one amplifier channel. Inside are a 5.25-inch woven-fiberglass woofer and a 0.75-inch PEI tweeter, tuned for natural vocals and even coverage across a 100 by 100 degree pattern. Installation is simple: fasten the supplied InvisiBall mount to a wall, then swing the speaker into position and lock it. A UV-resistant polystyrene shell and zinc-plated grille give it an IP-44 rating, and the optional WeatherMax grille with a panel cover raises that to IP-55 for more exposed spots. Terminal-strip wiring takes bare wire up to 12 AWG.

    Key Features

    • 8-ohm direct setting plus 70V and 100V transformer taps
    • 5.25-inch woofer and 0.75-inch tweeter, 100 x 100 degree coverage
    • Aimable InvisiBall wall mount and hex key in the box
    • IP-44 rating, IP-55 with optional WeatherMax grille and MTC-PC2/PC3
    • White finish matches light interiors

    Specifications

    ModelJBL Control 25-1
    ColorWhite (RAL 9016)
    Impedance8 ohms (THRU setting)
    70V taps30 W, 15 W, 7.5 W, 3.7 W
    100V taps30 W, 15 W, 7.5 W
    Transformer insertion lossLess than 0.94 dB at any tap
    Low-frequency driver135 mm (5.25 in) woven-fiberglass cone, butyl rubber surround
    High-frequency driver19 mm (0.75 in) PEI diaphragm, ferrofluid-cooled, Kapton voice-coil former
    Frequency range (-10 dB)60 Hz - 20 kHz
    Frequency response (+/-3 dB)85 Hz - 17 kHz
    Sensitivity90 dB SPL, 1 W / 1 m (100 Hz - 10 kHz average)
    Maximum SPL (1 m)110 dB continuous pink noise average, 116 dB peak (calculated)
    Power handling200 W continuous program (2 hr)
    Coverage100 deg H x 100 deg V
    DirectivityQ 6.04, DI 7.6 dB (1 kHz - 16 kHz average)
    Crossover2nd-order low-pass, 3rd-order high-pass
    ConnectorsScrew-down terminal strip; open lugs up to 9 mm OD (#6, #8, #10) or bare wire to 12 AWG (2.5 mm2)
    EnclosureHigh-impact polystyrene (HIPS), UV-resistant paint; zinc-plated steel grille with TGIC polyester powder coat
    MountingBuilt-in InvisiBall aimable wall mount; two 6 mm points for optional U-bracket; rear safety loop
    Dimensions (H x W x D)243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep on InvisiBall bracket
    EnvironmentalIP-44; IP-55 with optional WeatherMax grille and MTC-PC2/PC3 panel cover
    IncludedInvisiBall wall-mount system, 6 x 100 mm hex key
    Net weight3.4 kg (7.5 lb) each