• 8-inch Kevlar woofer paired with a 1-inch titanium-diaphragm compression driver
  • Switchable 8 ohm direct input or 70 V / 100 V transformer taps
  • Rotatable horn with 110 x 85 degree coverage
  • InvisiBall aimable wall mount included
  • IP-X4 rated and tested to MIL-STD-810 environmental standards
  • Transformer listed to UL 1876
Retail: $685.00
Price: $572.00
You Save: $113.00 (16.5%)
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: C29AV-1

    Description

    The JBL Professional Control 29AV-1 is a compact two-way surface-mount loudspeaker built for indoor and outdoor installed sound. It pairs an 8-inch Kevlar-cone woofer with a 1-inch titanium-diaphragm compression driver on a rotatable horn, so the 110 x 85 degree pattern can be turned to suit a wall or a ceiling-height mount. A multi-tap transformer lets the same speaker run direct at 8 ohms or on 70 V and 100 V distributed lines, which makes it a practical fit for restaurants, retail floors, fitness clubs, patios and other background-music or paging zones.

    This black version ships with the InvisiBall mount, which aims easily and helps deter tampering, and with an input panel cover for the terminal strip. The enclosure is rated IP-X4 and tested against MIL-STD-810 for humidity, salt spray, temperature and UV, so it holds up in demanding spaces. Optional U-bracket and ceiling-mount adapters are available separately.

    Key Features

    • 8-inch Kevlar woofer paired with a 1-inch titanium-diaphragm compression driver
    • Switchable 8 ohm direct input or 70 V / 100 V transformer taps
    • Rotatable horn with 110 x 85 degree coverage
    • InvisiBall aimable wall mount included
    • IP-X4 rated and tested to MIL-STD-810 environmental standards
    • Transformer listed to UL 1876

    Specifications

    TypeTwo-way surface-mount loudspeaker, indoor/outdoor
    Low-frequency driver200 mm (8 in) Kevlar cone, butyl rubber surround, 50 mm (2 in) voice coil
    High-frequency driver25 mm (1 in) compression driver, titanium diaphragm
    Frequency response (+/-3 dB)45 Hz - 18 kHz
    Frequency range (-10 dB)37 Hz - 18 kHz
    Sensitivity90 dB (2.83 V, 1 m)
    Max SPL (1 m)120 dB short-term, 114 dB long-term
    Power handling300 W continuous program, 150 W continuous pink noise
    Rated impedance8 ohms nominal (direct), 6.3 ohms minimum at 230 Hz
    70 V taps110 W, 55 W, 28 W, 14 W
    100 V taps110 W, 55 W, 28 W
    Coverage110 degrees horizontal x 85 degrees vertical, rotatable horn
    Input connectorScrew-down terminal strip, up to 12 AWG (2.5 mm2) wire
    Dimensions (H x W x D)520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
    Net weight12.2 kg (26.8 lb)
    ColorBlack
    EnvironmentalIP-X4 (IEC 529); exceeds MIL-STD-810 humidity, salt spray, temperature and UV
    Safety listingTransformer listed per UL 1876
    IncludedInvisiBall mounting base, MTC-PC2 input panel cover, 6 mm hex wrench