• Two-channel power amplifier delivering 2,100 W per channel into 4 ohms (1,200 W at 8 ohms, 3,000 W at 2 ohms)
  • Onboard DSP with parametric EQ on inputs and outputs, per-channel high-pass and low-pass crossover filters and up to 50 ms of delay per channel for aligning speakers
  • Peakx Plus limiters with adjustable threshold, attack and release, plus a subharmonic synthesizer with adjustable frequency, gain and filter type
  • 50 presets (49 user-definable) and HiQnet control, including Band Manager or Audio Architect software over USB, so system settings can be saved and recalled
  • Three user-selectable fan modes (normal, early, full speed) and software monitoring of AC line voltage and power supply temperature
  • Cast-aluminum handles and a locking power cord clip for road and rack use
  • Rack chassis 3.5 in tall and 16.2 in deep at 24 lb
Price: $3,855.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: XTI6002

    Description

    The Crown XTi 6002 is the top model in the XTi 2 Series: a two-channel power amplifier with onboard DSP for large touring systems, big venues, theaters and installations that need maximum output from a single rack chassis. It delivers 2,100 watts per channel into 4 ohms and is rated for 2-ohm loads, giving plenty of headroom for subwoofers and high-demand cabinets. Built-in EQ, crossovers, delay and limiting replace outboard processors, and HiQnet software handles setup and recall. Confirm included accessories with 4TEC Direct.

    Key Features

    • Two-channel power amplifier delivering 2,100 W per channel into 4 ohms (1,200 W at 8 ohms, 3,000 W at 2 ohms)
    • Onboard DSP with parametric EQ on inputs and outputs, per-channel high-pass and low-pass crossover filters and up to 50 ms of delay per channel for aligning speakers
    • Peakx Plus limiters with adjustable threshold, attack and release, plus a subharmonic synthesizer with adjustable frequency, gain and filter type
    • 50 presets (49 user-definable) and HiQnet control, including Band Manager or Audio Architect software over USB, so system settings can be saved and recalled
    • Three user-selectable fan modes (normal, early, full speed) and software monitoring of AC line voltage and power supply temperature
    • Cast-aluminum handles and a locking power cord clip for road and rack use
    • Rack chassis 3.5 in tall and 16.2 in deep at 24 lb

    Specifications

    Channels2
    Power per channel, 8 ohm1,200 W
    Power per channel, 4 ohm2,100 W
    Power per channel, 2 ohm3,000 W
    Bridged, 8 ohm4,200 W
    Bridged, 4 ohm6,000 W
    Input sensitivity1.4 V
    Signal-to-noise (A-weighted)103 dB
    THD< 0.5%
    Frequency response+0 / -1 dB, 20 Hz to 20 kHz at 1 W
    Crosstalk> 70 dB (20 Hz to 1 kHz)
    Dimensions (H x W x D)3.5 x 19 x 16.2 in (8.9 x 48.3 x 41.1 cm)
    Weight24 lb (10.9 kg)
    Shipping weight30 lb (13.6 kg)
    AC inlet20 A IEC