Switchers

The Blustream AMF42AU is a 1U 4x2 presentation switcher built for meeting rooms and teaching spaces. Three HDMI 2.0 inputs and a USB-C input route independently to two outputs, with output 2 carrying HDMI and HDBaseT at the same time for a remote display or projector.Independent scaling on each output, seamless switching and a microphone mixer with phantom power make it a single-box room solution, and Power over Coax (PoC) can power a compatible Blustream HDBaseT receiver. Full HDBaseT...

The Blustream C44CS-KIT is a Contractor series 4x4 HDBaseT matrix packaged with four matching RX70CSL receivers. It routes four HDMI 2.0 sources to four remote displays over single CAT cables, carrying video, audio, bi-directional IR and power to each receiver.Colour Space Conversion lets 18Gbps HDMI 2.0 content travel over HDBaseT, while per-output down-conversion keeps older 4K 4:2:0 or 1080p displays working alongside full 4K screens. Output 1 also has a local HDMI port mirroring the...

The Blustream C88CS is a Contractor series 8x8 HDBaseT matrix that distributes eight HDMI 2.0 sources to eight remote displays over single CAT cables, with bi-directional IR and Power over Cable for compatible receivers.Colour Space Conversion carries 18Gbps content when used with Blustream RX70CS receivers, and each HDBaseT output can down-convert for 4K 4:2:0 or 1080p displays while others stay at full 4K. Output 1 adds a local HDMI port.Key FeaturesHDMI 2.0, 4K 60Hz 4:4:4, HDCP 2.2VGA to...

The Blustream CMX42CS is a compact Contractor series 4x2 HDMI 2.0 matrix for two-zone systems. Four sources route to two displays at up to 4K 60Hz 4:4:4 with HDR, and either output can down-convert for an older screen.HDMI audio is broken out on each output to analog L/R and coaxial digital for feeding amplifiers or zone audio, and IR routing lets remotes at each display control the matched source.Key FeaturesHDMI 2.0, 18Gbps, 4K UHD 60Hz 4:4:4, HDRVGA to WUXGA and 480i to 4K...

The Blustream CMX44CS-V2 is the current Contractor series 4x4 HDMI 2.0 matrix. Any of four sources can be sent to any of four displays at up to 4K 60Hz 4:4:4 with HDR, and each output can down-convert for displays limited to 4K 4:2:0 or 1080p.Audio from each output is broken out to optical digital and to a 5-pin Phoenix balanced/unbalanced analog connection, ready for zone amplifiers or DSP.Key FeaturesHDMI 2.0, 18Gbps, 4K UHD 60Hz 4:4:4, HDRVGA to WUXGA and 480i to 4K resolutionsBitstream...

The Blustream CMX88CS is a Contractor series 8x8 HDMI 2.0 matrix that distributes eight sources to eight displays at up to 4K 60Hz 4:4:4. Each output can down-convert on its own, so 4K 4:2:0 displays can share a system with full 4K screens.Every output breaks out its audio to analog L/R and coaxial S/PDIF at the same time, and a built-in web interface handles configuration and control.Key FeaturesHDMI 2.0, 4K UHD 60Hz 4:4:4, HDRVGA to WUXGA and 480i to 4K resolutionsBitstream pass-through of...

The Blustream CMX88CS-V2 is a Contractor series 8x8 HDMI 2.0 matrix for professional and custom installers. Eight sources route to eight independent displays at up to 4K 60Hz 4:4:4, and each output down-converts automatically when needed.Each zone breaks out audio to optical S/PDIF and balanced/unbalanced analog at the same time, and eight Phoenix audio inputs allow analog source audio to be embedded. Per-input EDID management and a 1U rack design round out the package.Key FeaturesHDMI 2.0,...

The Blustream CUSTOMPRO-HUB is the chassis at the core of the Custom Pro modular matrix range. Installers choose the Custom Pro input, output and control boards that suit each project, so the same hub can become an HDMI, HDBaseT or mixed 8x8 system with options such as audio breakout, simultaneous HDBaseT/HDMI outputs and RS-232 pass-through.A rugged housing and interlocking board design simplify installation and servicing. Input and output boards are separate Blustream products and are not...

The Blustream Custom Pro HUB16 is the 4U chassis at the heart of the Custom Pro modular matrix family. Rather than a fixed I/O count, it lets the installer build the switcher a project needs by fitting 2-way and 4-way input and output boards plus optional control and audio boards in its 12 bays, up to a full 16x16 HDBaseT matrix. The interlocking board design keeps installation and later servicing simple.Key FeaturesUp to 16 video inputs and 16 video outputs using interchangeable 2-way and...

The Blustream HMX44-18G-KIT is a four-zone matrix that sends full 18Gbps HDMI 2.0 to every room without compression, including HDR10 and HDR10+. Each supplied RX18G receiver gets video, power, IR, RS-232 and gigabit network on one CAT6A cable, and a separate audio matrix lets any source or returned TV audio play in any zone.Key FeaturesUncompressed, unconverted HDMI 2.0 18Gbps over HDBaseT34K 60Hz 4:4:4 up to 100m, HDR10 and HDR10+Video smart scaling on HDBaseT outputs14x4 audio matrix: 4...

The Blustream HMX88-18G is an eight-zone uncompressed HDBaseT3 matrix for large homes and commercial sites that want full 18Gbps 4K HDR in every room. It powers compatible receivers over the CAT6A cable and carries IR, RS-232 and gigabit network to each zone. HDBaseT receivers are not included; pair with RX18G receivers.Key FeaturesUncompressed, unconverted HDMI 2.0 18Gbps over HDBaseT34K 60Hz 4:4:4 up to 100m, HDR10 and HDR10+Video smart scaling on HDBaseT outputs26x8 audio matrix: 8 input...

The Blustream HMXL42ARC-KIT is a compact two-zone matrix for homes and small commercial spaces. It switches four HDMI sources to two displays, scales video down for lower-resolution screens and brings TV audio back through ARC, with an independent audio matrix for each zone. Both receivers are included and powered from the matrix.Key FeaturesColour space conversion supporting HDMI 2.0 18Gbps including HDR4 HDMI inputs independently routed to 2 HDBaseT outputs4K 60Hz 4:4:4 up to 40m, 1080p up...

The Blustream HMXL44ARC-KIT is a 4x4 HDMI 2.0 matrix that sends video, bi-directional IR and power to each zone over one CAT cable using HDBaseT. Colour space conversion lets the system carry 4K 60Hz 4:4:4 sources up to 40m, and Smart Scaling on the HDBaseT outputs means a 1080p or 4K 4:2:0 display in one room does not hold back the 4K displays elsewhere. An independent audio matrix with ARC pulls TV audio back from each zone for distribution to amplifiers or soundbars.Key FeaturesHDMI 2.0...

The Blustream HMXL88ARC brings eight HDMI 2.0 sources to eight HDBaseT zones over single CAT cables. Colour space conversion keeps 4K 60Hz 4:4:4 content intact up to 40m, and Smart Scaling on each HDBaseT output lets lower-resolution displays share the system without limiting the 4K screens. The 26x8 audio matrix runs independently of video and accepts HDMI or optical ARC from every zone when paired with RX70CS receivers.Key FeaturesHDMI 2.0 18Gbps with HDR, HDCP 2.2 compliantSimultaneous HDMI...

The Blustream HSP14CS-V2 splits one HDMI 2.0 4K 60Hz 4:4:4 source to four HDBaseT outputs, sending video, IR and power to each receiver over a single CAT cable. Each output can be downscaled independently, so 1080p and 4K 4:2:0 screens can share a source with full 4K displays. An HDMI loop out feeds a local display, and the audio breakout outputs run at the same time for feeding amplifiers or soundbars.Key FeaturesHDMI 2.0 18Gbps with HDR through CSC, HDCP 2.2Bitstream passthrough of...

The Blustream MFP62 gathers laptop and room sources into one presentation switcher. Three HDMI inputs sit alongside USB-C (DP 1.2 Alt mode), DisplayPort and VGA, and any of them can be sent to two scaled HDMI outputs at up to 4K 60Hz 4:4:4.Audio is handled in the same box. A mic input supports line level, 48V phantom power or balanced/unbalanced mono, and an audio mixer sets independent levels. The unit can embed analogue audio and break out audio to analogue L/R and coaxial S/PDIF at the same...

The Blustream MV41 is a 4x1 HDMI multiview switcher that puts up to four HDMI 2.0 sources on a single screen at once. Choose from preset or custom PIP, PBP, POP, dual, triple and quad window layouts, with seamless switching between them.Every input has its own HDMI loop-out for a local display or for cascading to other equipment. Audio from the selected source breaks out to balanced or unbalanced analogue L/R and optical S/PDIF at the same time.Key Features4 x HDMI inputs, 1 x multiview...

The Blustream MX22AB-8K is a compact 2x2 HDMI 2.1 matrix for the latest 8K and high-frame-rate sources. Two inputs route independently to two outputs at up to 40Gbps, carrying 8K 60Hz, 8K 30Hz 4:4:4 or 4K 120Hz 4:4:4 with HDR, plus ALLM and VRR for gaming consoles and PCs.It can switch automatically when it detects a new 5V hot plug or TMDS signal, or manually from the front panel, IR or RS-232. Audio breaks out to analogue L/R and optical S/PDIF at the same time for a soundbar or AV...

The Blustream MX44AVW is a 4K HDMI 2.0 video processor that can run as a 4x4 seamless switching matrix, an advanced video wall processor or a quad multiview system. In video wall mode individual panels can be overlapped and rotated, which suits creative and portrait wall layouts.Multiview mode offers preset and custom PIP, POP, PBP, dual, triple and quad windows. Blustream notes that 1080i works in matrix and multiview modes but not in video wall mode.Key Features4K HDMI 2.0 processing for...

The Blustream MX44KVM is a 4x4 USB 3.0 matrix that lets four host computers share four USB peripherals such as keyboards, mice, cameras or touch panels. Transfer rates reach 5Gbps and it is backward compatible with USB 2.0 and 1.1, with no drivers needed.An RS-232 loop-through repeats incoming commands to other Blustream products, and its inputs and outputs can be assigned so it follows a Blustream video matrix for full KVM switching. Four configurable GPIO ports allow integration with...

The Blustream PLA88CS is the Platinum 8x8 4K HDMI 2.0 HDBaseT matrix. Over a single CAT cable it carries HDMI, ARC, LAN, two-way IR and RS-232 and PoC, reaching 150m at 1080p or 100m at 4K 60Hz 4:4:4 using Long Range Mode with the recommended RX150CS receiver.Eight HDMI inputs plus two remote HDBaseT inputs route to eight HDBaseT outputs, four of which are mirrored on HDMI for dual displays per zone. Each HDBaseT output scales independently, and a separate audio matrix with Dolby and DTS...

The PRO-8AB adds zone audio breakout to a Custom Pro matrix, pulling the HDMI audio from each of the 8 video zone outputs and presenting it as coaxial digital and analog stereo for local amplifiers or audio systems.Key FeaturesBreaks out audio from 8 video zone outputsCoaxial digital and analog L/R per zoneNo DSP processingQuick-release card fittings for the Custom Pro Matrix hubIdeal ApplicationsBuilding or expanding a Blustream Custom Pro matrixReplacing or upgrading a board in an installed...

The PRO-8ABV gives each Custom Pro video zone its own audio feed with adjustable analog level, so the matrix can drive local amplifiers or soundbars at a controlled volume alongside a coaxial digital output.Key FeaturesVariable line-level control on analog outputsCoaxial digital and analog L/R per zone2-channel PCM on analog outputsQuick-release card fittings for the Custom Pro Matrix hubIdeal ApplicationsBuilding or expanding a Blustream Custom Pro matrixReplacing or upgrading a board in an...

The PRO-8IR-V2 handles IR routing inside a Custom Pro matrix, sending control from each zone back to the sources in the rack and passing IR out to the HDBaseT receivers. 12V operation requires compatible IR hardware and receivers.Key FeaturesBi-directional IR routing5V or 12V selectableRouted control of local source hardwareQuick-release card fittings for the Custom Pro Matrix hubIdeal ApplicationsBuilding or expanding a Blustream Custom Pro matrixReplacing or upgrading a board in an installed...