Sensors

The Lutron MS-Z101-V-WH combines a Maestro 0-10V dimmer with a passive infrared vacancy sensor in a single-gang control. It is the vacancy-only version of the MS-Z101: occupants turn the lights on manually, and the control switches them off automatically after the room has been empty for the selected timeout. That manual-on behavior helps meet energy codes such as California Title 24 that call for vacancy sensing in many spaces.The dimmer drives LED drivers or fluorescent ballasts that use a...

The Lutron MS-Z101-WH combines a passive-infrared motion sensor and a 0-10V dimmer in one Maestro wallbox device, giving small rooms automatic lighting control plus manual dimming without a ceiling sensor or separate power pack. It switches up to 8A of 0-10V LED drivers or electronic fluorescent ballasts at 120 to 277V and sinks up to 50mA on the dimming link, enough for 25 drivers drawing 2mA each. The sensor watches a 180-degree field and covers roughly 30 x 30 ft for walking-type motion and...

The Lutron PD-OSENS-WH is a wireless, battery-powered motion sensor for the Caseta Wireless system. In its default occupancy mode it turns paired Caseta lights on when someone walks in and off after the room has been empty for the selected timeout; it can also be set up to behave as a vacancy sensor that only turns lights off.It is a companion device: it does not switch any load itself and must be paired to Caseta dimmers, switches or plug-in dimmers, either directly or within a Smart Hub...

The Lutron PD-VSENS-WH is a wireless vacancy sensor for the Caseta Wireless system. Lights come on only when someone presses the dimmer, switch or Pico remote; the sensor then turns them off automatically after the room has been empty for the chosen timeout. This manual-on approach saves energy and meets California Title 24 requirements.This is a companion device and does not switch a load by itself. Pair it with Caseta dimmers, switches or plug-in dimmers, with or without a Smart Hub. It runs...

The Lutron WMS-Z101-AL combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-BL combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-BR combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-GR combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-IV combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-LA combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...

The Lutron WMS-Z101-WH combines a passive-infrared motion sensor and a 0-10V dimmer in a single Maestro wall control, and it is the TAA-compliant version of the MS-Z101 for government and federally funded projects. It switches up to 8 A of 0-10V LED drivers or electronic fluorescent ballasts at 120-277 V and sends a 0-10V signal to as many as 25 compatible fixtures. The sensor can be set for automatic on/off (occupancy) or manual on with automatic off (vacancy), with selectable timeouts and...