Converters & Extenders

The Blustream HEX18G-KIT is a straightforward uncompressed HDBaseT3 extender for installs that need full 18Gbps HDMI 2.0 at the screen without the extra audio and USB features of the HEX18GARC. Video passes bit for bit with no colour conversion, and IR and RS-232 ride along on the same CAT6A cable.Key FeaturesUncompressed, unconverted 4K 60Hz 4:4:4HDR10 and HDR10+Up to 100m, depending on format, cable and environmentSupports VGA to WUXGA and 480i to 4KHDMI re-clocking at the receiverBitstream...

The Blustream HEX18GARC-KIT uses HDBaseT3 to carry a full 18Gbps HDMI 2.0 signal without compression or colour conversion. On top of the video it returns display audio with eARC and ARC, extends USB keyboard and mouse control, and shares gigabit Ethernet, IR and RS-232 between the two ends.Key FeaturesUncompressed, unconverted 4K 60Hz 4:4:4 over one CAT6A cableHDR10 and HDR10+ supportUp to 100m, depending on format, cable and environmentHDMI loop-out on the transmittereARC from the display,...

The Blustream HEX31WP-TX-US gives a meeting space laptop and HDMI connections in one double-gang wall plate and sends the selected source over HDBaseT to a Blustream receiver or matrix. It can switch automatically when a device is plugged in and has a button to turn the display on or off. Note the USB-C input does not charge connected devices.Key FeaturesTwo HDMI and one USB-C inputManual or automatic source selection, front panel and RS-232 switching4K up to 40m: 3840 x 2160 at 30Hz 4:4:4,...

The Blustream HEX70ARC-KIT extends HDMI to a display and sends the TV's own audio back to the equipment end, so a soundbar or AV receiver near the rack can play TV apps and broadcast sound. Video is uncompressed with zero latency, and IR and power share the same CAT cable.Key FeaturesUncompressed video and audio with zero latency1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to 4KARC via...

The Blustream HEX70CS-KIT is the 70m member of the CSC extender family, for typical room-to-rack distances. Its receiver can down-convert 4K 60Hz 4:4:4 for displays that only accept 4:2:0 or 1080p while the transmitter loop-out keeps full 4K for a local screen.Key FeaturesHDMI 2.0 18Gbps including HDR4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KHDMI loop-out on the transmitterBitstream pass-through of multichannel and object-based audioHDMI re-clocking on the...

The Blustream HEX70CS-RX is the receiver from the HEX70CS set, sold on its own for use with a HEX70CS-TX or a compatible Blustream HDBaseT matrix. It drives the display over HDMI, breaks audio out for a local amplifier and carries IR and RS-232 between the two ends.Key FeaturesHDMI 2.0 18Gbps including HDR4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KBitstream pass-through of multichannel and object-based audioHDMI re-clocking and advanced EDID managementAnalogue...

The Blustream HEX70CS-TX is the transmitter from the HEX70CS set, sold on its own as a spare or to pair with any compatible Blustream HDBaseT receiver. Its HDMI loop-out feeds a local screen at full resolution while the HDBaseT output sends video, control and power to the far end.Key FeaturesHDMI 2.0 18Gbps including HDRAdvanced colour space conversion4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KBitstream pass-through of multichannel and object-based audioOne...

The Blustream HEX70HDUK-KIT is a meeting-room extender that accepts laptops on HDMI, USB-C or DisplayPort, switches between them and a local source at the display, and extends USB so a room camera, speakerphone or touch screen works with the connected computer. The receiver can switch the display on and off by CEC or RS-232.Key FeaturesHDBaseT video and audio over one CAT cable with HDR supportTX inputs: 1 x HDMI, 1 x USB-C, 1 x DisplayPort, manual or auto selectionRX local HDMI inputUSB-C up...

The Blustream HEX70HDUK-TT turns the HEX70HDUK transmitter into a flush in-table connection point. Users lift the hinged canopy to reach the HDMI, USB-C, DisplayPort and USB ports, while the cable lacer bar keeps the wiring underneath tidy. The HEX70HDUK-KIT is not included.Key FeaturesIn-desk enclosure for boardroom tablesBlack brushed aluminium faceplateDiscreet hinged canopyCable management lacer barTable top mounting brackets and wing-nut boltsCut template includedIdeal ApplicationsBoardroo...

The Blustream HEX70SL-KIT is a compact, cost-effective HDBaseT set for everyday HDMI runs. The thin units tuck behind a TV or into furniture, power travels over the CAT cable from a single supply, and IR pass-through lets a remote control the source from the display location.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and...

The Blustream HEX70SL-RX is the receiver from the HEX70SL set, sold separately as a spare or to pair with a compatible Blustream HDBaseT transmitter or matrix. It is usually powered over the CAT cable from the other end, so no local supply is needed behind the display.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to...

The Blustream HEX70SL-TX is the transmitter from the HEX70SL set, sold separately as a spare or to pair with a compatible Blustream HDBaseT receiver. Its slim body fits behind a source or in a cabinet, and it can be powered over the CAT cable from the far end.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to...

The Blustream HEX70USB-KIT extends a computer's HDMI and USB to a remote display, so keyboards, mice, touch screens or cameras at the screen work as if they were plugged into the PC. IR, RS-232 and power share the same CAT cable, and the receiver breaks audio out for a local amplifier.Key FeaturesUncompressed video and audio with zero latency1080p up to 70m, 4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0USB 2.0: 1 x USB-B host at TX, 4 x USB-A peripherals at...

The Blustream PAC500AU is a passive audio-over-CAT extender kit for moving stereo analogue audio a long way with minimal fuss. A pair of compact units converts RCA left/right audio onto a single CAT cable and back again, reaching up to 500m.Because it is passive there is nothing to power at either end, and either unit can serve as the transmitter or receiver.Key FeaturesUp to 500m over a single CAT cablePassive, no power requiredRCA L/R input and outputRJ45 CAT linkInterchangeable TX and RX...

The Blustream POC11 sits in an HDBaseT line and injects 12V or 24V DC so a Blustream HDBaseT transmitter can be powered remotely, removing the need for a power outlet behind the source.It passes 18Gbps 4K video, multichannel audio and HDCP 2.2. Blustream specifies a maximum of 30m from the POC11 to the transmitter and 70m to the receiver, and notes it is designed for Blustream products and may not work with other HDBaseT extenders.Key FeaturesSelectable 12V or 24V via 3-step switchCompatible...

The Blustream RX150CS is a long-range HDBaseT receiver that extends HDMI 2.0 video, audio and control over a single CAT cable. It carries 4K 60Hz 4:4:4 up to 100m and 1080p up to 150m, and its CSC technology can automatically downscale 4K content to 1080p for the connected display.Key FeaturesHDMI 2.0, 18Gbps, 4K 60Hz 4:4:4, HDR, HDCP 2.2Automatic 4K to 1080p downscalingARC return via HDMI or ToslinkBi-directional IR and RS-232 pass-throughEthernet pass-through with compatible Blustream...

The Blustream RX18G is an uncompressed, unconverted HDBaseT 3.0 receiver built for critical viewing rooms. Paired with the HMX88-18G or HMX44-18G matrix it delivers full 18Gbps HDMI 2.0 4K 60Hz 4:4:4 with HDR over a single CAT6A cable, alongside ARC, 1Gb Ethernet, IR, RS-232 and PoC.Key FeaturesNo compression or colour conversion of 18Gbps HDMI 2.0HDR10 and HDR10+ supportBitstream pass-through of multichannel and object-based audioARC via HDMI or optical input1Gb LAN, IR and RS-232...

The Blustream RX70CS is an HDBaseT receiver that extends HDMI 2.0 video, IR and RS-232 over a single CAT cable from a Blustream matrix or transmitter. It carries 4K 60Hz 4:4:4 up to 40m and 1080p up to 70m, and its CSC technology can automatically downscale 4K content to 1080p.Key FeaturesHDMI 2.0, 18Gbps, 4K 60Hz 4:4:4, HDR, HDCP 2.2Automatic 4K to 1080p downscalingARC return via HDMI or ToslinkBi-directional IR and RS-232Analogue L/R and Toslink audio breakoutBi-directional PoCIdeal...

The Blustream TX150CS is a 150m HDBaseT transmitter in the Platinum range. It carries HDMI 2.0 video at up to 4K 60Hz 4:4:4, bi-directional IR, RS-232, Ethernet and Power over Cable over a single CAT cable, and uses CSC (colour space conversion) to support the HDMI 2.0 18Gbps specification including HDR.Paired with the RX150CS receiver or the PLA88CS matrix, it returns audio from the display (ARC) via HDMI or optical S/PDIF and passes 100Mbps Ethernet. HDMI re-clocking helps with HDCP,...

The Blustream UEX100E-KIT is a transmitter and receiver set that uses HDBaseT to extend USB 2.0 up to 100m over a single CAT cable. Up to four USB devices at the transmitter connect to one USB host at the receiver, with a combined bandwidth of up to 480Mbps, and USB 1.1 devices are supported.Along with USB, the link carries bi-directional 100Mbps Ethernet, IR and RS-232, plus a 2-channel analogue audio path whose direction can be set. Power over Cable lets one supply power both ends. Actual...

The Blustream UEX3C-KIT uses HDBaseT to extend USB 3.2 Gen1 up to 100m over a single CAT cable, supporting up to two USB devices on one host at data rates up to 5Gbps. It is aimed at conferencing cameras, capture devices, flash and hard drives, KVM devices and audio interfaces.The host-end unit connects by USB-C and adds a separate USB-C charging input so an external USB-C supply can power the host. The device-end unit provides USB-C and USB-A ports. Bi-directional Power over Cable powers the...

The Blustream UEX3D is the device-side unit of a USB 3.2 Gen1 HDBaseT extension system. It connects back to a compatible Blustream host unit, the UEX3H or UEX3H-WP, up to 100m away over a single CAT6A cable, and provides four ports for cameras, capture devices, storage, KVM peripherals and audio devices.The UEX3D ships with the 24V power supply for the link and can power the host unit over the cable. It is backward compatible with USB 2.0 and 1.1, supports bi-directional RS-232 with compatible...

The Blustream UEX3D-WP-US is the wall plate version of the UEX3D device unit, built in a dual US Decora format with a magnetic faceplate. It links back to a compatible Blustream USB 3.2 Gen1 host unit, the UEX3H or UEX3H-WP, up to 100m away over a single CAT6A cable, putting USB-C and USB-A ports right at the table or lectern.It is backward compatible with USB 2.0 and 1.1, supports bi-directional RS-232 with compatible HDBaseT products, and ships with the power supply for the link, which can...

The Blustream UEX3H is the host-side unit of a USB 3.2 Gen1 HDBaseT extension system. It switches two USB hosts, such as a room PC and a guest laptop, between two local USB devices and the devices on a remote Blustream device unit up to 100m away over a single CAT6A cable, with combined throughput up to 5Gbps.Host selection can be automatic or manual using the front panel button or RS-232. A USB-C charging input lets an external USB-C supply power the host. The UEX3H is powered over the cable...