The Chief FPIWMKIT2 is the install-and-commission half of the Tempo flat panel in-wall mount system. It is delivered after the wall is finished and fits into the in-wall boxes set during rough-in with the FPIWMKIT1 kit. The kit supplies the trim flanges, in-wall rail assemblies, display interfaces and two 15 x 10 inch Lever Lock plates that provide at least 1 RU of clearance for small devices behind the screen. Devices can be shifted laterally inside the boxes, and the plates accept Middle Atlantic Forward small device mounting clamps. Once installed, the mount carries displays up to 250 lbs on 20-gauge steel or wood studs (200 lbs on 25-gauge steel), tilts from -10 to 0 degrees in 2.5-degree steps, and offers fine height and plumb adjustment. Toggle anchors and a display hardware bag with M8 x 50 screws are included, and silver adjustment screws are distinguished from black assembly screws to simplify setup.
Key Features
- Post-drywall delivery keeps hardware off the jobsite during construction
- Two Lever Lock storage plates, 20 lbs (9 kg) each
- Tilt -10°/+0°; height +/-0.50" (12.7 mm); plumb 0.38" (9.5 mm)
- VESA 200 x 100 mm to 1500 x 450 mm; 650 mm tall with FHB5174
- Landscape or portrait
Ideal Applications
Commercial and custom residential projects where a large display must sit nearly flush with the wall while hiding players, codecs or other small devices in the wall cavity.
Compatibility
Requires the FPIWMKIT1 in-wall boxes and stud tabs kit (sold separately), or order FPIWMS which includes both. Kit contents include 2 interfaces, 4 side flanges, 1 saddle flange, 4 top/bottom flanges, 4 in-wall rail assemblies, 2 Lever Lock panels, cable ties and mounts, security rivets, #10-24 screws, toggle anchors, 1/8" hex driver and Allen key, display hardware and manual.