The Chief CPA072P is a 72-inch (182.9 cm) pre-drilled extension column for Chief's CPA pin connection ceiling system. CPA columns link a CPA ceiling plate or adapter to a Chief ceiling mount, setting the drop height for heavy flat panels, ceiling-hung video walls and multi-screen menu boards. Install is simple: optionally feed cables through the column, seat it in the CPA ceiling plate and secure it per the plate instructions, then attach the mount to the lower end. Chief rates the column at 500 lbs, but the combined assembly is limited to the lowest-rated component, and the supporting structure must carry five times the total load. This P version is supplied pre-drilled (Chief lists its column install type as Pre-drilled, versus Standard for the plain CPA columns), saving a step on site. Chief does not publish the hole pattern on the product page, so confirm against Chief's drawing for your mount. Choose the length that puts your display at the right viewing height; CPA columns are offered from 18 to 120 inches.
Key Features
- Column length 72 in (182.9 cm)
- Pre-drilled for pin connection
- 500 lb (226.8 kg) capacity
- Internal cable routing
- Black finish
- Indoor use
Ideal Applications
Ceiling-hung displays, video walls and digital menu boards in retail, QSR, transit, lobbies and venues where a Chief CPA pin connection mount system is specified.
Compatibility
Chief lists CPA columns for use with CPA ceiling plates and CPA adapters (such as CPA265), the XCM1U, LCM1U, MCM1U, RLC1 and RMC1 ceiling mounts, LCM2X2U/LCM3X2U/LCM3X3U video wall ceiling mounts, LCM/LCB menu-board ceiling mounts, and the CPA380 truss ceiling adapter. Ceiling plate and mount sold separately.