The Chief CMS036W is a 36-inch (3-foot) fixed-length extension column in Chief's CMS series. It is the drop pipe that lowers a projector or flat panel mount from the structure above to the height you need, whether you are clearing a suspended ceiling, getting a projector into the correct throw position, or lining a display up with a sight line. Both ends carry standard 1-1/2-inch NPT threads, so the column screws into a Chief ceiling plate or structural adapter at the top and the mount's column fitting at the bottom. The column has a 1.9-inch outside diameter and Chief rates it for a combined load of 500 lbs, although the real limit is whichever component in the assembly is rated lowest. Because it is hollow, power and signal cables can run inside for a clean installation. The white finish matches Chief's white plates and mounts. If you need to fine-tune height on site, consider the telescoping CMS adjustable columns instead. Ceiling plate, adapter and mount are sold separately.
Key Features
- 36" (91.4 cm) fixed length
- 1-1/2" NPT threaded on both ends
- 1.9" (48 mm) outside diameter
- 500 lb (226.8 kg) rated capacity
- Cable routing through the column
- UL Listed, TAA compliant
Ideal Applications
Classrooms, conference rooms, auditoriums, houses of worship and retail spaces where a ceiling-mounted projector or display has to hang below a high, open or suspended ceiling.
Compatibility
Threads into Chief ceiling plates and structural adapters made for 1-1/2" NPT columns (for example the CMA plate family, or the CMS380 truss ceiling adapter) and into the column fitting of Chief projector and flat panel ceiling mounts. Chief requires at least four full threads of engagement at each connection. Indoor use only. Ceiling plate, adapter and mount are not included.