Accessories

The Blustream IRDE1 is a 5V designer IR emitter that sticks onto the IR window of a source or display and repeats commands from a Blustream matrix, extender or video over IP unit. A visible red LED shows when IR is being sent, which makes commissioning and troubleshooting quicker.Key Features5V operation3.5mm mono plugAdhesive backing includedRed indicator LEDIdeal ApplicationsControlling sources in a rack from a remote zoneDisplay control at the far end of an HDBaseT or IP linkReplacement or...

The Blustream IRDIR is a designer-style 5V IR receiver for capturing handheld remote commands and feeding them into the IR input of a Blustream matrix, extender or switcher. It sticks in place with its adhesive backing, and a recessed cable channel lets the lead leave the receiver either vertically or horizontally for a tidy install.Blustream states that most of its IR products run on a 5V line. For 12V third-party control systems, Blustream directs installers to its IR-CAB 12V-to-5V link...

The Blustream IRE1 is a 5V single IR emitter that carries routed IR commands from a Blustream matrix, extender or switcher to the IR window of a source device. It terminates in a 3.5mm mono plug and is built for short-range, discreet control of a single device.Blustream notes that its 5V IR cabling can be damaged if connected to a product set for 12V IR, so confirm the IR voltage setting on switchable products before installing.Key Features5V operation3.5mm mono jack20kHz to 55kHz carrier...

The Blustream IRE2 is a 5V twin IR emitter that carries routed IR commands from a Blustream matrix, extender or switcher to the IR window of a source device. Its two emitter buds share one 3.5mm mono plug, so one IR output can drive two pieces of equipment in the same rack or cabinet.Blustream notes that its 5V IR cabling can be damaged if connected to a product set for 12V IR, so confirm the IR voltage setting on switchable products before installing.Key Features5V operation3.5mm mono...

The Blustream IRR is the standard 5V IR receiver used across the Blustream range. It picks up handheld remote commands at a display or room location and passes them into the IR input of a Blustream matrix, HDBaseT receiver or switcher over a 3.5mm stereo connection.For 12V third-party control systems, Blustream directs installers to its IR-CAB 12V-to-5V link cable rather than connecting 5V cabling to a 12V source.Key Features5V operation3.5mm stereo jack (signal, ground and 5V)20kHz to 55kHz...

The Luxul ABR-4500 is a epic 4 av series multi-wan gigabit router from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul AP-3064 is a ax3600 wi-fi 6 4x4 dual-band poe access point from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul PI-25 is a 2.5 Gbps PoE+ Mid-Span Injector from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul SW-505-8P-F is a 12-Port (8 PoE+) Gigabit Managed Switch from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul SW-515-48P-F is a 52-Port (48 PoE+) Gigabit Managed Switch with 4 SFP Ports from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul SW-615-24P-R is a av 28-port (24 poe+) gigabit managed switch with 4 sfp+ ports from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The Luxul SW-615-48P-F is a 52-Port (48 PoE+) Gigabit Managed Switch with 4 SFP+ Ports from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The On-Q CPT306WV1 (In-Wall TV Power and Cable Management Kit, White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2004WHV1 (Dual Cable Access Kit) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2102BKV1 (In-Wall TV Connection Kit Black) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2102WHV1 (In-Wall TV Connection Kit White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT21USBWHV1 (In Wall TV Connection Kit with USB White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2302BWH (In-Wall Power & Cable Management TV Connection Kit - New Con) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2302KWH (In-Wall Power & Cable Management TV Connection Kit - New Con) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The Russound CB-140 is the connecting block at the centre of an infrared repeater system. It lets a remote control work equipment that is hidden in a cabinet, closet or rack in another location. An IR receiver mounted where the remote is aimed, such as a Russound SLM-1 on a TV bezel or an 854 tabletop receiver, plugs into the block. The CB-140 then sends the received commands out to up to four emitter jacks. Each jack can drive a single IRE-1 emitter for one component, or a dual IRE-2 emitter...

The Russound CB-PS is the matching power supply for the CB-140 IR connecting block. The CB-140 has no internal supply, so this adapter (or an equivalent 12-volt source) is needed for the IR repeater system to work. It delivers a regulated 12 volts DC at up to 500 milliamps from a transformer that plugs directly into a wall outlet, and carries the power to the equipment over a 3-foot (1 m) cord that ends in a 2.1 mm coaxial plug. Regulated output keeps the voltage steady. While Russound...

The Russound IRE-1 is a single-head infrared emitter, the final link in an IR repeater system. It carries the commands collected by a remote IR receiver to one piece of AV equipment, such as a cable box, disc player or streamer, that sits out of sight in a cabinet or rack. The small emitter head attaches over the component's IR window with an adhesive pad and is low enough to go unnoticed. An IR blocking cover is supplied to keep direct remote signals or room light from reaching the sensor and...

The Russound IRE-2 is a dual-head infrared emitter for IR repeater systems. A single 3.5 mm plug splits to two small emitter heads, so one emitter output on a Russound CB-140 connecting block can control two pieces of equipment, which is how the CB-140 reaches up to eight components from its four outputs. Each head sticks over a component's IR sensor with an adhesive pad and has a low profile that stays out of sight. IR blocking covers are included to shield the sensors from direct remote...

The Russound SLM-1 is a compact infrared receiver for the front end of an IR repeater system. It mounts on the surface of a TV bezel, wall, shelf or cabinet face, wherever the remote is normally pointed, and passes the commands back to a connecting block that drives emitters on the hidden equipment. The body is only about a quarter-inch thick, so it sits discreetly on today's thin displays. Reception is wideband, covering 36 to 58 kHz carrier frequencies, and wide-angle, so it works with most...