Accessory
Pilot Tone Load
PTL-1
PTL-1
Q-Sys
Features
• Pilot tone detection on 70/100V
loudspeaker circuits using QSC
DataPort and CXD platform
amplifiers
• Ceramic screw-down connector
block
• Fuse protects circuit against
excessive current
• Versatile install adapter plate
included
• Fits most plenum rated electrical
boxes
The PTL-1 is a Q-Sys accessory that provides
an end-of-line 22 kHz impedance soak for
70/100V loudspeaker circuits. Used in
combination with a QSC DataPort-equipped
amplifier or CXD platform amplifier, the
PTL-1 becomes a vital component for
monitoring of a distributed loudspeaker line.
Q-Sys monitors the integrity of a
loudspeaker line by transmitting a 22 kHz
pilot tone (outside the audible range of
human hearing and undetectable amidst the
program material) and continually sensing
the impedance of the PTL-1 installed at the
far end of the line.
A significant drop in impedance will indicate
a short circuit in the line, while an
impedance rise will indicate a break or other
open-circuit fault. With each detected
failure, Q-Sys can generate a time-stamped
entry in its Event Log and can be
programmed to trigger an alert message.
The operator can also choose when the pilot
tone and monitoring is run; for example, on
command during maintenance checks, or
continuously for real-time diagnostics.
Inputs 1
Voltage 70/100V loudspeaker line
Center Frequency 22 kHz
Connector Ceramic screw-down
Dimensions 3.3” x 3.3” x 1” (84 x 84 x 25 mm)
Weight Approx. 0.06 lb (0.03 kg)
Specifications:
PTL-1 Spec Sheet 06/23/2014 please recycle
© 2014 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and
Trademark office and other countries.
2.19
55.6 3.40
86.4
3.40
86.4
.20
5.1
SLOTS 1.46
37.1
2.10
53.3
2.45
62.2
3.00
76.2