Device Support |
| Endpoints | Supports 1000 DM NVX devices, each configured as an encoder or decoder |
| Domains | Supports 240 domains (allows grouping of endpoints in up to 240 individual subsystems) |
Communications |
| Ethernet | 10/100/1000 Mbps, 10 Gbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, IPv4 or IPv6, HTTPS web browser setup and control, Crestron control system integration |
| DM NVX (via Ethernet) | HDCP 2.2, AES audio/video content encryption, RTP, RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction) |
Connectors |
| MGMT (front) | (1) 8-pin RJ45 connector, shielded, female; 10Base-T/100Base-TX/1000Base-T Ethernet port for hardware management |
| USB 3.0 (front) | (2) USB Type A connectors, female, blue; USB 3.0 host ports for factory use only |
| LAN 1 – 6 (front) | (6) 8-pin RJ45 connectors, shielded, female; 10Base-T/100Base-TX/1000Base-T Ethernet ports for web browser, endpoint, and control traffic |
| LAN 7 – 8 (front) | (2) SFP+ ports (10 Gb only); 10GBase-X Ethernet ports for web browser, endpoint, and control traffic; Each port accepts one Crestron SFP-10G series SFP+ transceiver module |
| LAN 9 – 12 (front) | (4) SFP+ ports; 1000Base-X/10GBase-X Ethernet ports for web browser, endpoint, and control traffic; Each port accepts one Crestron SFP-1G or SFP-10G series SFP/SFP+ transceiver module |
| 100-240V~ 3-6A 50/60Hz (rear) | (2) IEC 60320 C14 main power inlets; Each mates with a removable power cord, included |
Controls & Indicators |
| Power Button | (1) Pushbutton, initiates boot up or shutdown |
| RESET | (1) Recessed pushbutton, initiates a hard reset |
| PWR | (1) Green LED, indicates the unit is powered on |
| DISK | (1) Yellow LED, indicates SSD activity |
| LAN 1 – 2 | (2) Green LEDs, each indicates Ethernet activity on the corresponding LAN port |
| MSG | Bi-color blue/red LED, blue identifies the device when "unit identification" is initiated, red indicates a power supply fault |
| MGMT | (1) Amber LED & (1) bi-color green/orange LED; indicates Ethernet activity, speed, and link status for the management LAN port |
| LAN 1 – 6 | (1) Amber LED & (1) bi-color green/orange LED per each of (6) ports; each pair indicates Ethernet activity, speed, and link status for the corresponding LAN port |
| LAN 7 – 12 | (2) Green LEDs per each of (6) ports; each pair indicates Ethernet activity and link status for the corresponding SFP+ port |
Power |
| Main Power x2 | 6 Amps @ 100-120 Volts AC, 50/60 Hz; 3 Amps @ 220-240 Volts AC, 50/60 Hz |
| Redundancy | (2) Hot-swappable power supply modules, unit continues to operate at full capacity on one functioning power supply module |
| Power Consumption | 140 Watts at 100% CPU usage and fan speed |
Environmental |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Operating Humidity | 8% to 90% RH (non-condensing) |
| Non-Operating Temperature | -40° to 158° F (-40° to 70° C) |
| Non-Operating Humidity | 5% to 95% RH (non-condensing) |
| Heat Dissipation | 477.7 BTU/hr |
Construction |
| Chassis | Metal, black finish, vented front and rear, variable speed fan cooled |
| Mounting | Freestanding or 1 RU 19-inch rack-mountable (includes rack mounting brackets for attachment to front and rear rack rails with 10-32 threaded screw holes or 3/8" (10 mm) square holes, adjustable for varying rack depths) |
Dimensions |
| Height | 1.71 in (44 mm) |
| Width | 17.50 in (445 mm) without rack mounting brackets; 19.00 in (483 mm) with rack mounting brackets |
| Depth | 18.78 in (477 mm) without rack mounting brackets |
Compliance |
| IC, CE, FCC Part 15 Class A digital device |