| Video |
| Switcher | 2x1 manual or auto-switching, Crestron QuickSwitch HD technology |
| Input Signal Types | HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support [2] (DVI & Dual-Mode DisplayPort compatible [3]) |
| Output Signal Types | DM 8G+ & HDBaseT w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support; HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support [2] (DVI compatible [6]) |
| Copy Protection | HDCP 2.2 |
Maximum Resolutions |
Scan
Type | Resolution | Frame
Rate | Color
Sampling | Color
Depth |
|---|
| Progressive | 4096x2160 DCI 4K
&
3840x2160 4K UHD | 24 Hz | 4:4:4 | 36 bit | | 30 Hz | 4:4:4 | 36 bit | | 60 Hz | 4:2:2 | 36 bit | | 60 Hz | 4:4:4 | 24 bit | | 2560x1600 WQXGA | 60 Hz | 4:4:4 | 36 bit | | 1920x1080 HD 1080p | 60 Hz | 4:4:4 | 36 bit | | Interlaced | 1920x1080 HD 1080i | 30 Hz | 4:4:4 | 36 bit |
|
| NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 600 MHz |
| Audio |
| Switcher | 2x1, audio-follow-video |
| Input Signal Types | HDMI (Dual-Mode DisplayPort compatible [3]) |
| Output Signal Types | DM 8G+ & HDBaseT, HDMI |
| Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels |
| Communications |
| Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
| USB Host | Supports signal extension of USB HID class devices, supports a TT-100 or TT2-100 series cable caddy [8] |
| USB Device | Supports USB HID signal extension to a USB host, supports computer console (for setup) |
| RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) |
| IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system) |
| DigitalMedia | DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet |
| HDBaseT | HDCP 2.2, EDID, CEC, RS-232, PoE+, Ethernet |
| HDMI | HDCP 2.2, EDID, CEC |
| NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system |
| Connectors |
| 24 VDC 1.0 A | (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included |
| DM OUT | (1) 8-pin RJ45 connector, female, shielded;
DM 8G+ output, HDBaseT compliant;
PoDM+ PD port (HDBaseT PoE+ compatible) [4,5];
Connects to the DM 8G+ input of a DM switcher, receiver, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1] |
| HDMI OUT | (1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible [6]) [2] |
| HDMI IN 1 – 2 | (2) HDMI Type A connectors, female;
HDMI digital video/audio inputs;
(DVI & Dual-Mode DisplayPort compatible [3]) [2] |
| USB HID | (1) USB Type A connector, female;
USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device (USB signal extension & routing), or for connection of one TT-100 or TT2-100 series cable caddy [8] |
| COMPUTER | (1) USB Type B connector, female;
USB 2.0 device port for computer console (setup), or for connection to a computer or other USB HID-compliant host (USB signal extension & routing) |
| LAN | (1) 8-pin RJ45 connector, female;
10Base-T/100Base-TX Ethernet port |
| COM | (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support |
| IR | (1) 2-pin 3.5 mm detachable terminal block;
IR/Serial port;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
| Ground | (1) 6-32 screw;
Chassis ground lug |
| Controls & Indicators |
| 24 VDC | (1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or a local power pack |
| DM OUT | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence |
| HDMI OUT | (1) Green LED, indicates HDMI signal presence at the HDMI output |
| HDMI IN 1 – 2 | (2) Green LEDs, each indicates HDMI signal presence at the corresponding HDMI input |
| LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity |
| SETUP | (1) Red LED and (1) recessed pushbutton for Ethernet setup |
| RESET | (1) Recessed pushbutton for hardware reset |
| Power |
| Power Pack (included) | Input: 100-240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: PW-2412WU |
| Power over DM (PoDM) | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment) [4] |
| Power over HDBaseT | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment) [5] |
| Power Consumption | 11.9 Watts typical using power pack;
12.7 Watts typical using PoDM+ or HDBaseT PoE+;
(without a USB powered device connected) |
| Environmental |
| Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 40.6 BTU/hr using power pack;
43.3 BTU/hr using PoDM+ or HDBaseT PoE+ |
| Enclosure |
| Chassis | Metal, black finish, with (2) integral mounting flanges; vented top, front, and bottom |
| Mounting | Freestanding, surface mount, or attach to a single rack rail |
| Dimensions |
| Height | 11.02 in (280 mm) |
| Width | 5.34 in (136 mm) |
| Depth | 1.07 in (27 mm) |
| Weight |
| 19.2 oz (545 g) |
| Compliance |
| UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device |
| Maximum Cable Lengths |
Resolution | Cable Type |
|---|
DM-CBL-ULTRA
DigitalMedia™ Ultra Cable | DM-CBL-8G
DigitalMedia 8G™ Cable | CAT5e
(or better) [1] |
|---|
| 1920x1080 FHD 1080p | 330 ft (100 m) | 330 ft (100 m) | 330 ft (100 m) | | 1920x1200 WUXGA | | 1600x1200 UXGA | | 2048x1080 DCI 2K | | 2048x1152 QWXGA | | 2560x1080 UWFHD | 230 ft (70 m) | 165 ft (50 m) | | 2560x1440 WQHD | | 2560x1600 WQXGA | | 3840x2160 4K UHD | | 4096x2160 DCI 4K |
|