Home > Microphones > Wired Mics >

Audio-Technica AT4050ST

There are no reviews yet. | Write a review
  • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
  • Independent cardioid and figure-of-eight condenser elements
  • Switch selection of Mid-Side mode and two internally matrixed stereo modes
  • Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Certified by the METAlliance (Music Engineering and Technology Alliance)
Price: $1,494.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: AT4050ST

    Description

    Side-address stereo condenser microphone

    Specifications

    ELEMENTExternally-polarized (DC bias) condenser
    POLAR PATTERNCardioid and Figure-of-eight
    FREQUENCY RESPONSE20-18,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITYStereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
    Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa
    Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
    Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
    IMPEDANCE50 ohms
    MAXIMUM INPUT SOUND LEVELMid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;
    159 dB SPL, with 10 dB pad (nominal)
    NOISEStereo 90°: 25 dB SPL
    Stereo 127°: 16 dB SPL
    Mid: 15 dB SPL
    Side: 17 dB SPL
    DYNAMIC RANGE (typical)Mid: 134 dB, 1 kHz at Max SPL
    Side: 132 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIOStereo 90°: 69 dB, 1 kHz at 1 Pa
    Stereo 127°: 78 dB, 1 kHz at 1 Pa
    Mid: 79 dB, 1 kHz at 1 Pa
    Side: 77 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS48V DC, 6.4 mA typical (both channels total)
    SWITCHES90°, 127°, M-S;
    Flat, roll-off;
    10 dB pad (nominal)
    WEIGHT517 g (18.2 oz)
    DIMENSIONS193.0 mm (7.60") long,
    53.4 mm (2.10") maximum body diameter
    OUTPUT CONNECTORIntegral 5-pin XLRM-type
    CABLE5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
    ACCESSORIES FURNISHEDAT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
    AUDIO-TECHNICA CASE STYLER1