| ELEMENTS | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | X/Y Stereo |
| FREQUENCY RESPONSE | 20–20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 150 Hz, 6 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -41 dB (8.9 mV) re 1V at 1 Pa |
| CHANNEL BALANCE | <2.5 dB |
| IMPEDANCE | 200 ohms |
| MAXIMUM INPUT SOUND LEVEL | 122 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 103 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 75 dB, 1 kHz at 1 Pa |
| BATTERY TYPE | 1.5V AA/UM3
WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result. |
| BATTERY CURRENT / LIFE | 1.2 mA / 500 hours typical (alkaline) |
| SWITCH | Off, on/flat, on/roll-off |
| WEIGHT | 270 g (9.5 oz) |
| DIMENSIONS | 192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| CABLE | 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch |