Commercial Series
DT64 Danteโข AES67 Enabled Network Audio 6โ Coaxial Loudspeaker
2 x 2 lay in tile grill system
Replacing previous models:
DT64-B / DT64-B-X
The DT64 is a Danteโข and AES67 audio network addressable and self-amplified ceiling speaker system.
It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power
supply is required. The speaker system has a Class D amplifier which provides efficient use of
power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system
will solve the issue of having to provide a separate amplifier or I/O interface for speaker
installations.
One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive
speakers, with one separate audio channels for each speakers.
The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency
response which makes this the top choice for todayโs overhead commercial applications.
This assembly can be used in wide range of projects for
Features:
DT64-C / DT64-C-X
paging and background music applications. The DT64-C is ideal for hotels, education, hospitals,
retail stores,
๐ Network enabled Loudspeaker by Danteโข
๐ PoE+ powered without a need for local power.
๐ RJ45 connection for audio from PoE+ Ethernet.
๐ 6โ polypropylene cone with inverted rubber surround.
๐ 1โ Polyamide dome tweeter
๐ Weather and water resistant.
๐ Two Channel Audio
๐ Plenum Rated
performing art centers, restaurants, airports, houses of worship, and board rooms. The end users
will appreciate both the sound and visual quality of these speakers.
System Specification
Frequency Response 100 Hz - 20 kHz (+/- 3dB)
Maximum SPL at 1M 102 dB
Voice-coil diameter 1.0"
Barium Ferrite (for high efficiency of
4TEC Dante Ceiling Speaker Advantage
* No need to have separate dante enabled amp or I/O interface
Magnet
Nominal Coverage Angle (500Hz โ 4kHz Average)
Audio Input Output Power
Signal to Noise Ratio Power consumption
Input connector on active speaker Maximum wire length to companion speakers
PoE+
Controls
Metal Enclosure Raiting
Physical Speaker Data
Tweeter Woofer Cone
Surround Material Crossover Frequency
Enclosure Depth with Handybox
the speaker driver)
140ยฐ Conical Average Dante Audio via Ethernet
10W / Channel (5W per speaker)
>99dB
2 Watts Standby, 25 Watts Maximum RJ-45
300ft (100m) at 16-18AWG IEEE 802.3at-2009
Danteโข controller software Plenum Rated
13mm polyamide hard dome Polypropylene
Inverted rubber Surround
5.0 kHz 8.75โ
* A Single RJ45 connection to main active speaker with two conductor wire connection to each of
the three passive speakers with separate channels.
* Highly efficient speaker driver due to barium ferrite magnet.
* Cost effective simple one system solution.
* 2โ x 2โ ceiling tile lay in system for fast and easy installation and visually attractive
for tile ceiling environment
Frequency Response
Grille dimension 24.0โ x 24.0โ
Net weight of the speaker Shipping Weight (1 box of 2
speakers)
16.0 lbs
42.0 lbs
CHANNEL ZONING ILLUSTRATION
SPEAKER CONFIGURATION *
Passive Speaker Connections:
RJ 45 connection jack for PoE+ Three (3) status lights
โ Power
โ Dante
โ Status
Audio output to Speaker 2 Channel passive speaker.
Seismic Safety Strap
Audio output to Speaker 3 Channel passive speaker.
Audio output to Speaker 4 Channel passive speaker.
Dante Enabled PoE+ Amplified Speaker
Seismic Safety Strap
2 position Phoenix connector for audio signal input from amplified speaker. 3 speakers total.
Each speaker will have its own audio channels.
(3) Companion Speakers
Architect's & Engineer's Specifications
Polar Responses
(Measurement done in house)
The powered loudspeaker system shall be AMK DT64. The speaker shall feature Audinate / Danteโข
network audio signal that broadcasts 4 channels of audio. The speaker system shall consist of a set
of 4 speakers with separate channels of audio network broadcast to each speakers.
The Network switch must have PoE+ to provide the power that is needed for the system.
The active unit of the system shall have one RJ-45 jack for network audio connection. Then there
shall be (3)three of the two position phoenix type (euro) connections. Each of the connections
shall go the passive speakers at different zones.
The speaker unit in the system shall be of the coaxial type with an 6.5" woofer of polypropylene,
an inverted rubber surround, and a 1" polyamide soft dome tweeter mounted on a post. The transducer
in the loudspeaker system shall be AMK CX 602 coaxial loudspeaker. The woofer shall have a 13 oz.
(369g) Barium Ferrite magnet. The two transducer sections shall be coupled through a built-in
capacitor bypass crossover.
The crossover frequency shall be at 5.0 kHz. The low frequency transducer shall have 1" (25.4mm)
voice coil and the high frequency transducer shall have 0.51" (13mm) voice coil. The system shall
have a frequency response of 65 Hz- 20 kHz (+/- 10dB).
The system shall be on 2' x 2' metal perforated grille and 7โ deep powered speaker enclosure
attached on the back of the grille. The depth of whole speaker assembly 8.75โ including the
junction box attached.
The total weight of the each of the speaker system shall not exceed 16.0 lbs.
The loudspeaker system shall be AMK Innovations model DT64.
Conforms to EIA Standards: RS-276-A, RS- 278-B, RS-426-A.