DIN Rail Cresnet Distribution Block

Get Custom Programming from 4TEC

Price: $150.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DIN-BLOCK
    The DIN-BLOCK is a DIN rail-mounted Cresnet distribution block designed to facilitate the termination of Cresnet wiring at a head end or distribution point. DIN rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices.
    Connections
    • POWER A (6) 4-pin 3.5mm detachable terminal blocks, paralleled;Power Group A Cresnet distribution ports;Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC)
    • POWER B (6) 4-pin 3.5mm detachable terminal blocks, paralleled;Power Group B Cresnet distribution ports;Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC)
    Note: Y, Z, and G terminals are paralleled between power groups

    LED Indicators
    • POWER A – B (2 green) Indicate Cresnet power present at any NET port of each corresponding power group
    • Y, Z (2 red) Indicate Cresnet Y and Z data activity at any NET port
    Power Requirements
    • Cresnet Power Usage 0.3 Watts (0.01 Amp @ 24 Volts DC)
    Environmental
    • Temperature 32° to 104°F (0° to 40°C)
    • Humidity 10% to 90% RH (non-condensing)
    • Heat Dissipation 1 BTU/hr
    Enclosure
    • Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm)
    Dimensions
    • Height 3.71 in (94.2 mm)
    • Width 4.18 in (106 mm)
    • Depth 2.29 in (58.0 mm)
    • Weight 5.0 oz (148 g)
    Key Features
    • 12 port Cresnet distribution block
    • Detachable screw terminal blocks for easy termination and troubleshooting
    • Split power bus for flEX ble 24V power distribution
    • Diagnostic LEDs for network power and data
    • Passive device no programming required
    • 6M wide DIN rail mounting