Crestron CLX-2DIM8

As part of a complete Crestron lighting system, the CLX-2DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. The CLX-2DIM8 is actually composed of two independent 4 channel dimmers in a single module. Each channel is rated for 1920 Watts, with a total module rating of 3840 Watts when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.

Load Ratings

• Dimmer Channels 8
• Per Channel 16 Amps (1920 Watts)
• Per Group Channels 1-4: 16 Amps (1920 Watts);Channels 5-8: 16 Amps (1920 Watts)
• Module Total 32 Amps (3840 Watts)
• Minimum Load 25 Watts
• Load Types Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescent

Power Requirements

• 120 Volts AC, 50/60Hz, single-phase;All feeds must be same phase or split phase

Connectors on Module

• Module Interconnect (2) 5-pin 0.156 inch headers;Cresnet®/Override interconnect ports;Connect to DIN-AP3, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided

Connections via CLT Terminal Block (sold separately)

• LINE 1 - 2 (2) DIN rail terminal blocks, black, line power inputs;Must be same phase or split phase
• DIM 1 - 8 (8) DIN rail terminal blocks, red, channel outputs
• N IN 1 - 2 (2) DIN rail terminal blocks, white, line input neutrals
• N OUT 1 - 8 (8) DIN rail terminal blocks, white, channel output neutrals

Buttons

• SETUP Used for manual channel activation and TSID

LED Indicators

• PWR (green) Indicates line power is applied to the LINE terminal
• NET (yellow) Indicates communication with the control system
• 1 – 8 (red x8) Indicates state of each channel
• SETUP (red) Indicates unit is in setup/manual mode

Environmental

• Temperature 32° to 104°F (0° to 40°C)
• Humidity 10% to 90% RH (non-condensing)
• Heat Dissipation 26 BTU/Hr + (4.7 BTU/Hr x Load Current in Amps), 176 BTU/Hr at maximum load

EnclosureGray metal with black heat sink, surface mount module with (2) integral mounting flanges;Occupies 1 module space in any CAEN or CAEN-MLO enclosureDimensions

• Height 7.59 in (19.27 cm)
• Width 6.92 in (17.57 cm)
• Depth 3.43 in (8.70 cm)
• Weight 4.50 lb (2.04 kg)

• Standards & Certifications UL Listed, CEC Title 24 2013 Compliant