Cameo® Express Wireless In-Wall Dimmer, ELV, 120V, Black Smooth

A cost-effective, single-gang in-wall lighting dimmer for 120 Volt applications. Features reverse phase dimming technology for use with dimmable electronic low-voltage, LED, incandescent, and 2-wire fluorescent lighting loads. Works standalone or integrated with a Crestron® control system or Crestron Pyng® system via infiNET EX® wireless technology. Fully-configurable, field-replaceable engravable buttons enable personalized control with onboard presets and customizable functionality. Available in smooth white, almond, and black.

Get Custom Programming from 4TEC

Price: $265.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CLW-DELVEX-E-B-S

    Description

    The CLW-DELVEX-E is a Cameo express wireless in-wall ELV dimmer designed for dimming low voltage light, supporting lighting load such as tungsten-halogen, incandescent, and dimmable Edison Screw Base LED. Even more affordable than Cameo dimmers and switches, the CLW-DELVEX-E features field-replaceable, engravable buttons and can be configured with various button layouts and designer colors. Its streamlined design matches the entire line of Cameo dimmers, switches, and keypads, making it a great addition to new or retrofit installations. In addition to its attractive look and feel, infiNET EX communication technology brings proven reliability to the CLW-DELVEX-E.

    Reverse Phase Dimming
    The CLW-DELVEX-E employs reverse phase (trailing edge) dimming technology to handle electronic low-voltage (ELV) transformers feeding halogen or LED lighting fixtures. It is also capable of controlling incandescent, tungsten-halogen, dimmable screw-base type CFL and LED bulbs, and 2-wire dimmable fluorescent ballasts.

    Customizable Buttons
    Each Cameo Express dimmer features the ability to configure its buttons in a variety of layouts to adapt its functionality to the application. Simple up/down dimming and on/off switching can be achieved using a single rocker switch or individual buttons. More sophisticated functionality is afforded using up to four buttons, allowing up to three dimming presets to be stored and recalled at will. Through integration with a control system, buttons may even be assigned to control a second lighting zone, select a whole-room lighting scene composed of several dimmers, turn on a ceiling fan, or adjust the audio system volume.[2]

    The CLW-DELVEX-E is furnished with a complete set of button caps to accommodate any desired button layout. Button caps may also be ordered with custom engraving [3], allowing each button to be labeled according to its function. The buttons are field configurable and replaceable, allowing changes to be made at any time.

    Green LED indicators are included to provide feedback when a button is pressed or a preset is selected. They also function as a bargraph to display the dimming level as the dimmer is adjusted. When the load is turned off, the top LED glows dimly, allowing the dimmer to be located easily in a dark room.

    infiNET EX® Wireless Technology
    Wireless integration with a Crestron control system enables the CLW-DELVEX-E to be controlled from any Crestron keypad, touch screen, handheld remote, or mobile device app. It can also enable intelligent automation as part of a complete Crestron energy management solution.[2]

    Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device (including the CLW-DELVEX-E) functions as an expander (routing node), relaying command signals through to every other infiNET EX device within range (typically 50 feet or 15 meters), ensuring that every command reaches its intended destination without disruption.[4]

    The CLW-DELVEX-E communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, MC3, or DIN-AP3MEX [3]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.[4]

    Key Features
    • Single-gang in-wall lighting dimmer
    • Configurable standalone functionality
    • Crestron® system integration via infiNET EX® wireless technology
    • Crestron Pyng® system compatible
    • Reverse phase dimming technology
    • Supports dimmable electronic low-voltage, LED, incandescent, and 2-wire fluorescent lighting loads
    • Rated 500 VA/Watts at 120 Volts AC [1]
    • Built-in air gap switch
    • Fully configurable button layout
    • Single rocker switch or up to four pushbuttons
    • Custom button engraving available [3]
    • Stores up to three scene presets
    • Customizable button functionality [2]
    • Green LED feedback indicators
    • Flying lead wiring connections
    • Standard 3-1/2 inch (89 mm) deep electrical box installation
    • Available in smooth white, almond, and black finishes
    • Matching decorator-style faceplates available [3]
    • CEC Title 24 2013 compliant

    Specifications

    Load Ratings

    • Load Types Incandescent, tungsten-halogen, electronic low-voltage transformers for low-voltage halogen or LED, electronic CFL, dimmable 2-wire fluorescent ballast, dimmable Edison Screw Base LED
    • Maximum Load 500 W/VA[3]
    • Minimum Load 25 Watts (with dedicated neutral Connected
    Power Requirements
    • 120 Volts AC, 50/60Hz, line power
    Controls
    • Button 1-4 Configurable for 1 to 4 single-action pushbuttons, programmable via control system
    • Dimming Ramp Rate 5 seconds (default), software adjustable 0.01 to 10 seconds
    • Preset Fade Time 2 seconds (default), software adjustable 0.01 to 120 seconds
    LED Indicator
    • Feedback (7) Green LEDs
    • Bargraph (1) 7 segment bargraph display utilizing the 7 feedback LEDs
    Wireless
    • RF Transceiver infiNET EX circledR; 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
    • Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities[1]
    • Gateway Requires an infiNET EX gateway[2]
    Connections
    • Line Black wire, 16 AWG
    • Neutral White wire, 16 AWG
    • Load Red wire, 16 AWG
    • Ground Green wire, 16 AWG
    Environmental
    • Temperature 32° to 104°F (0° to 40°C)
    • Humidity 10% to 90% RH (non-condensing)
    Enclosure
    • 1-gang mountable in a 3-1/2 inch deep electrical box;
    • Requires decorator style faceplate (not included)
    Dimensions
    • Height 4.13 in (105 mm)
    • Width 1.75 in (45 mm)
    • Depth 1.82 in (47 mm)
    Weight
    • 5 oz (142 g)
    Standards & Certifications
    • UL 1472
    • CSA C22.2 No. 184.1
    • CEC Title 24 2013 Compliant

    Additional Information

    Key Features

    • Provides reverse-phase dimming
    • Available in black, white, or almond
    • infiNET EX circledR; robust communication
    • Supports electronic low voltage dimming
    • Models popular Cameo® style
    • Configurable up to 4 buttons
    • Matching aesthetics across entire line
    • Stylish bargraph provides real-time status feedback
    • CEC Title 24 2013 Compliant