Limited Supply Please Contact for Availability. Cresnet 4-Channel Dimmer Module with single module enclosure - International Version, 230VAC Get Custom Programming from 4TEC
Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The CLI-220N-4 provides 4 channels of dimming for 230 Volt incandescent, magnetic low-voltage, and neon/cold cathode loads. Each channel can also be configured for switched-only control of non-dimmable loads. The unit is housed in a compact surface mount NEMA enclosure.
Additional Information
Load Ratings- Dimmer Channels 4
- Per Channel 7 Amps (1600 Watts)
- Module Total 15 Amps (3400 Watts)
- Load Types Incandescent, Magnetic Low-voltage, Neon/Cold Cathode
Power Requirements- Line Power 230 Volts AC, 50Hz, single-phase
- Cresnet Power Usage 0 Watts
Connectors- NET (1) 4-pin 5mm detachable terminal block;Cresnet slave port, connects to Cresnet control network
- LOCAL INPUTS 1 - 8 (1) 9-pin 5mm detachable terminal block;Direct control inputs for EX ernal contact closures;
Configurable for up/down or on/off control of each channel, or as (8) programmable digital inputs for Cresnet system control- LINE (1) Captive screw terminal, line power input
- LOADS 1 - 4 (4) Captive screw terminals, channel outputs
- NEUTRAL (3) Captive screw terminals, neutrals
Controls- ID CODE (2) Rotary DIP Switches, set Cresnet ID
- DIM/NON-DIM (4) Jumpers, select channel configurations
- OVERRIDE (1) DIP switch, forces all channel to full on
- MODE (3) DIP switches, configure local inputs
Environmental- Temperature 32° to 104°F (0° to 40°C)
- Humidity 10% to 90% RH (non-condensing)
Enclosure- Compact vented NEMA enclosure, surface mount
Dimensions- Height 12.5 in (31.75 cm)
- Width 6.0 in (15.24 cm)
- Depth 4.75 in (12.07 cm)
- Weight 11.0 lbs (4.99 kg)