| Modules |
| Dimmed Channels | 2 RGBW |
| Maximum per Channel | 5 A max per individual RGBW output channel, 5 A max per RGBW output group |
| Module Total | 10 A max |
| Load Types | 12–24 VDC PWM controlled anode RGBW or single color LEDs and LED strips |
| Dimming Range | 0–100% |
| PWM Frequency | 301 Hz (default) |
| Configurable | 120–1,200 Hz |
| Dimming Curve | Linear and logarithmic |
| Power Requirements |
| IN 1 | 12–24 VDC, 5 A max (60–100 W max) Class 2;
Power pass-through to OUTPUT-1 |
| IN 2 | 12–24 VDC, 5 A max (60–100 W max) Class 2;
Power pass-through to OUTPUT-2 |
| Communications |
| Cresnet | Cresnet slave mode |
| Power |
| IN 1 (+, -) | (1) set of (2) captive screw terminals;
Power input and power pass-through to OUTPUT-1;
Use a 12–24 VDC, 5 A max (60–100 W max) Class 2 power supply (not supplied);
Ensure proper polarity;
Wire size: 18–12 AWG |
| IN 2 (+, -) | (1) set of (2) captive screw terminals;
Power input and power pass-through to OUTPUT-2;
Use a 12–24 VDC, 5 A max (60–100 W max) Class 2 power supply (not supplied);
Ensure proper polarity;
Wire size: 18–12 AWG |
OUTPUT-1
(R +, R 1, G +, G 2, B +, B 3, W +, W 4) | (1) set of (8) captive screw terminals;
R +, G +, B +, and W + terminals are pass-through power from IN 1 +;
R 1, G 2, B 3, and W 4 terminals are PWM dimming control for the R, G, B, and W channels;
Wiring from OUTPUT-1 must remain separate from OUTPUT-2;
Accepts 18–14 AWG wires;
Maximum wire length: 100 ft (30 m) |
OUTPUT-2
(R +, R 5, G +, G 6, B +, B 7, W +, W 8) | (1) set of (8) captive screw terminals;
R +, G +, B +, and W + terminals are pass-through power from IN 2 +;
R 5, G 6, B 7, and W 8 terminals are PWM dimming control for the R, G, B, and W channels;
Wiring from OUTPUT-2 must remain separate from OUTPUT-1;
Accepts 18–14 AWG wires;
Maximum wire length: 100 ft (30 m) |
| NET | (2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet slave port;
24 VDC power input (power must be supplied by a DIN-PWS60 power supply (sold separately)) |
| OVERRIDE | (2) 2-pin 3.5 mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10 mA (per module) at 24 V |
| Controls |
| R, G, B, W | (4) miniature pushbuttons (1) per R, G, B, W channel;
Press to toggle the channel on and off;
Press and hold to dim the channel up and down |
| SETUP | (1) recessed miniature pushbutton;
Press to acknowledge Touch-Settable ID (TSID) mode |
| RESET | (1) Recessed miniature pushbutton;
Press to restart the DIN-2LEDPWM8 |
| Indicators |
| R, G, B, W | (4) Red LEDs (1) per R, G, B, W channel;
LED lights to indicate that the channel is on;
All LEDs light when the DIN-2LEDPWM8 is in override mode |
| SETUP | (1) Red LED;
Flashes to indicate that the DIN-2LEDPWM8 is in Touch-Settable ID (TSID) mode |
| OVR | (1) Red LED;
Lights to indicate that the DIN-2LEDPWM8 is in Override mode;
The R, G, B, and W LEDs also light to indicate that the channel is on |
| PWR | (1) Green LED;
Lights to indicate that DC power is supplied to the NET port |
| NET | (1) Amber LED;
Flashes to indicate communication on the Cresnet network |
| Environmental |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (noncondensing) |
| Heat Dissipation | 6.8 BTU/Hr |
| Construction |
| Housing | Plastic, light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated |
| Mounting | 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 6 DIN module spaces (108 mm) |
| Dimensions |
| Height | 3.57 in. (91 mm) |
| Width | 4.24 in. (108 mm) |
| Depth | 2.34 in. (59 mm) |
| Weight |
| 6.4 oz (181 g) |
| Compliance |
| CE, ETL Recognized Component, FCC Part B, CAN ICES-3 (B)/NMB-3(B) |