Home > Environment Controls > Modules >

Crestron DIN-4DIMFLV4

There are no reviews yet. | Write a review

DIN Rail 0-10V Dimmer Module, 4 feeds, 4 channels

  • 4 channels of 0-10 Volt dimming control
  • Supports 120 and 220 to 240 Volt, 50/60 Hz applications
  • Allows switching of lighting and exhaust fans[1]

Get Custom Programming from 4TEC
Price: $679.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DIN-4DIMFLV4

    Description

    The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.

    Override Input

    An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.

    DIN Rail Installation

    The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.

    Cresnet®

    The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit’s two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.

    Key Features
    • Provides 4 channels of 0-10 Volt dimming control
    • Supports 120 and 220 to 240 Volt, 50/60 Hz applications
    • Allows switching of lighting and exhaust fans[1]
    • Includes an override input
    • Communicates using Cresnet®
    • Sets up via the front panel or through software
    • Offers programmable functionality via DIN-AP2 or DIN-AP3
    • Mounts on a 9M wide DIN rail
    • CEC Title 24 2013 Compliant

    Specifications

    Load Ratings
    Dimmer Channels4
    Maximum Per Channel5 Amps @ 120 to 240 Volts AC, 50/60 Hz;
    600 Watts @ 120 Volts AC;
    1150 Watts @ 230 Volts AC;
    1200 Watts @ 240 Volts AC, 0.5 HP;
    16 Amps Resistive
    Module Total20 Amps @ 120 to 240 Volts AC, 50/60 Hz;
    2400 Watts @ 120 Volts AC;
    4600 Watts @ 230 Volts AC;
    4800 Watts @ 240 Volts AC
    Dim Load Types0-10 Volt fluorescent ballast or LED driver (4-wire);
    Maximum of 30 dimmable ballasts/drivers
    Switch Load Types[1]Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors
    Connections
    OUTPUT 1 – 4(2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs;
    Voltage Control Range: 0 to 10 Volts DC;
    Maximum Sink Current: 60mA per channel;
    Output Resolution: 1024 levels (10 bit)
    1 – 4(4) sets of (2) captive screw terminals;
    Isolated Class 1 SPST relay switch circuits 1 – 4;
    Relay Rating: 5 Amps maximum per channel;
    Maximum Wire Size: 12 AWG (2.5 mm²)
    NET(2) 4-pin 3.5mm detachable terminal blocks, paralleled;
    Cresnet® slave port
    OVERRIDE(2) 2-pin 3.5mm detachable terminal blocks, paralleled;
    Sensing input for external low-voltage contact closure;
    Activates override mode when a closure is present;
    Minimum Closure Rating: 10mA (per module) at 24 Volts
    Controls & Indicators
    1 – 4(4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
    NET ID(2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels
    SETUP(1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
    OVR(1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
    PWR(1) Green LED, illuminates when DC power is applied to the NET port
    NET(1) Yellow LED, indicates communication with the control processor
    RESET(1) Recessed miniature pushbutton, resets internal processor
    Enclosure
    Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
    Power Requirements
    Cresnet Power Usage4.2 Watts (0.18 Amps) @ 24 Volts DC
    Environmental
    Temperature32° to 104° F (0° to 40° C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation17 BTU/hr
    Dimensions
    Height3.71 in (95 mm)
    Width6.26 in (159 mm)
    Depth2.35 in (60 mm)
    Weight
    9.2 oz (260 g)
    Standards & Certifications
    UL Listed
    CE
    CEC Title 24 2013 Compliant