| Load Control |
| Dimmer Channels | 8 |
| Dimmable Load Types | LED, incandescent, electronic low voltage, magnetic low voltage [1], 2-wire fluorescent |
| Switched Load Types | Non-dimmable lighting [1] |
| Per Channel Load Rating | 2.5 Amps (692 Watts) |
| Per Group Load Rating | Group 1 (Channels 1-4): 10 Amps; (2770 Watts);
Group 2 (Channels 5-8): 10 Amps (2770 Watts) |
| Module Total Load Rating | 20 Amps (5540 Watts) [2] |
| Minimum Load | 0 Watts |
| Line/Load Voltage | 277 Volts AC, 60 Hz; requires one or two single-phase feeds (may be same or different phases) |
| SCCR | 30 kA |
| Connections |
| Via Terminal Block (sold separately) | LINE 1 – 2: (2) Screw terminals, black, line power feed inputs (per group);
DIM 1 – 8: (8) Screw terminals, red, load outputs (per channel);
N IN 1 – 2: (2) Screw terminals, white, line power feed neutrals (per group);
N OUT 1 – 8: (8) Screw terminals, white, load neutrals (per channel);
Note: Each terminal accepts one 14-10 AWG wire. |
| Module Interconnect | (2) 5-pin 0.156 inch headers;
Cresnet/Override interconnect ports;
Each connects to the adjacent module using the interconnect jumper provided;
Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure |
| Controls & Indicators |
| PWR | (1) Green LED, indicates line power is applied to the LINE 1 terminal |
| NET | (1) Yellow LED, indicates Cresnet communication with the control system |
| MODE (not labeled) | (1) Pushbutton, selects the dimming mode when in Local mode |
| SETUP | (1) Pushbutton, used to enter Local mode and test each channel |
| 1 – 8 | (8) Tri-color LEDs, each indicates the status, dimming mode, or error condition for the corresponding channel |
| Environmental |
| Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 12 BTU/hr + (3.8 BTU/hr x Load Current in Amps);
88 BTU/hr at maximum load |
| Enclosure |
Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in a CAEN enclosure |
| Dimensions |
| Height | 7.63 in (194 mm) |
| Width | 6.92 in (176 mm) |
| Depth | 3.43 in (87 mm) |
| Weight |
| 3.5 lb (1.6 kg) |