Home > Microphones > Wired Mics >

Audio-Technica AT4033A

There are no reviews yet. | Write a review
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Floating-construction capsule assembly provides isolation from noise and vibration
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
Price: $459.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: AT4033A

    Description

    Cardioid studio condenser microphone

    Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE30-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-32 dB (25.1 mV) re 1V at 1 Pa
    IMPEDANCE100 ohms
    MAXIMUM INPUT SOUND LEVEL145 dB SPL, 1 kHz at 1% T.H.D.;
    155 dB SPL, with 10 dB pad (nominal)
    NOISE17 dB SPL
    DYNAMIC RANGE (typical)128 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO77 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS48V DC, 3.2 mA typical
    SWITCHESFlat, roll-off;
    10 dB pad (nominal)
    WEIGHT13.4 oz (380 g)
    DIMENSIONS6.69" (170.0 mm) long,
    2.10" (53.4 mm) maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
    AUDIO-TECHNICA CASE STYLER1