AT2035 Cardioid Condenser Microphone


  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source


ATH-M20x Professional Monitor Headphones


  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit


Adjustable Studio Boom Arm


  • Full 360° rotation
  • Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
  • Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
  • Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
  • Internal cable management for clean desk appearance
Price: $229.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: AT2035PK

    Description

    Streaming/Podcasting Pack includes: one AT2035 cardioid condenser microphone, one pair of ATH-M20x headphones, shock mount, boom arm with threaded XLR cable

    Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE20-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-33 dB (22.4 mV) re 1V at 1 Pa
    IMPEDANCE120 ohms
    MAXIMUM INPUT SOUND LEVEL148 dB SPL, 1 kHz at 1% T.H.D.;
    158 dB SPL, with 10 dB pad (nominal)
    NOISE12 dB SPL
    DYNAMIC RANGE (typical)136 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO82 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11-52V DC, 3.8 mA typical
    SWITCHESFlat, roll-off;
    10 dB pad (nominal)
    WEIGHT403 g (14.2 oz)
    DIMENSIONS170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
    AUDIO-TECHNICA CASE STYLER5