Opto 22

The PCIe-AC51 is a high-speed adapter card designed to link Opto 22 I/O to PCI Express-compatible computers for PC-based control using the Pamux protocol. Each PCIe-AC51 can access up to 512 points of I/O along a Pamux bus of up to 500 feet in length.The PCIe-AC51 is ideal for customers who have been using Opto 22's AC28 adapter card but must upgrade to a newer computer that uses the PCI Express bus instead of the ISA bus. (This card replaces the PCI-AC28, which is no longer recommended for...

The SNAP-AIRTD-8U analog input module provides 8 input channels, each individually software configurable. This module is commonly used for 3-wire RTD temperature inputs but is also suited to high-resolution resistance measurements. It features open circuit detection if any wire breaks.You can individually configure each of the module's 8 points for a variety of behaviors, including a fixed temperature range for nickel, platinum, or copper RTD inputs; a fixed range in ohms; or two types of...

The SNAP-PAC-BATTERY-ML2430 is a replacement backup battery used for most SNAP PAC controllers and brains:SNAP PAC R-series controllers manufactured after July 1, 2007SNAP PAC S-series controllers with serial numbers 625654 and higher (SNAP-PAC-S1 controllers with serial numbers 625653 and lower use a G4BATT32.)SNAP PAC EB Ethernet brainsSNAP PAC SB serial brainsNormally you will not need to replace this battery. If you do, see replacement instructions in form 1910, Replacing the SNAP PAC...

Package of 100 hold-down screws for SNAP I/O modules.

Part of the SNAP TEX family of mounting and wiring accessories, the SNAP-TEX-CBE6 cable provides neat, protected wiring from the top of a SNAP I/O module to a SNAP TEX breakout board. The cable is six feet (1.8 m) long.Installation, maintenance, and troubleshooting are faster and simpler using SNAP TEX cables. Each cable snaps into the top of one module and terminates at the breakout board with 18-gauge, color-coded flying leads, already stripped and ready for wiring. The leads attach easily...

Part of the groov EPIC® system, the GRV-EPIC-CHS0 is designed to hold an intelligent GRV-EPIC-PR1 processor and a groov EPIC power supply. It does not include slots for I/O modules. This new chassis option is ideal for applications where I/O is not needed locally. You can place a groov EPIC processor and power supply in challenging industrial environments where typical computers or networking equipment might fail. The EPIC processor can provide the edge computing power and networking...

Ready to learn about or experiment with groov© EPIC, Opto 22's new groov Edge Programmable Industrial Controller? The groov EPIC© Learning Center is packed with fully-functioning EPIC hardware and software, and is designed as an integral part of our free OptoU Online Training at https://training.opto22.com. Note: Two certificates to attend groov EPIC Premium Factory Training (two GROOV-TRAINING-PF) at our factory and headquarters in Temecula, California are included with each Learning Center....

The GRV-IDCIFQ-12 module is part of the groov EPIC® system. This DC digital input module senses the on or off status for 2.5–30 VDC input devices such as proximity switches, push buttons, and auxiliary contacts. The module's 12 high-speed digital input channels are capable of measuring frequencies up to 200 kHz when wired for basic counting. It provides channel-to-channel isolation. The input channels can be configured to provide up to 4 axes of quadrature input with an index signal for each...

The GRV-IICTD-12 analog input module is part of the groov EPIC® system. This module collects temperature input data from any industry-standard Integrated Circuit Temperature Device (ICTD). The module has 12 channels of input. The GRV-IICTD-12 mounts on a groov EPIC chassis with other analog, discrete, and serial groov I/O modules and a GRV-EPIC-PR1 processor.

The GRV-IMAI-8 analog input module is part of the groov EPIC® system. This module provides channel-to-channel isolation on its 8 channels of analog current input with an input range of 0 to 20 mA and 4 to 20 mA. Each channel can be powered by an internally isolated loop supply or from an externally connected loop supply. Ranges are software configurable. The GRV-IMAI-8 mounts on a groov EPIC chassis with other analog, discrete, and serial groov I/O modules and a GRV-EPIC-PR1 processor. ...

The GRV-ITR-12 module is part of the groov EPIC® system. This module has 12 channels of analog to digital conversion that convert resistance to temperature or to Ohms. The module is ideal for NTC thermistors commonly used in HVAC, refrigeration, and process control applications. It may also be used with PTC thermistors in resistance sensing applications. The module has 12 channels of analog to digital conversion that convert resistance to temperature or to Ohms. The module reads variable...